WMI and SNMP issues
Since WMI based monitoring is not enabled if OpManager and AppManager is installed in linux server and if SNMP is not available, what are the workaround to monitor windows server
OpManager Freezes On DB Change
I have gotten around to installing OpManager on windows 2003 sp1 and everything works fine from the initial install but when I switch the DB from MySQL to MSSQL it will startup to a point then freeze up. When I try to put it back to MySQL it freezes up too. I have uninstalled and reinstalled OpManger a couple of times and cannot get it to work after the DB change. I made sured I installed the hotfixes before doing the switch when I did the reinstall but no luck. It creates the MSSQL database when
Set community String
I'm using trial version of opManager and I need to set the community string for a specified device, can anyone help me? I've checked some options (like 'Passwords' under device snapshot, 'Add device' under Admin) but doesn't work :roll:
Problem with msp
Hi, I have a problem with opmanager msp edition. After I added a lot of customers and approximately 150 devices into msp edition, msp works very slowly. The CPU usage of the computer comes up to 95 % when i start the msp central server. What can be the solution? Thanks EmTi
polling interval in appmanager and opmanager
Hi, How can I change the polling interval in opmanager and appmanager
Cisco Switches
How can i get OpManager to correctly show the switchport descriptions and the mac addresses on my switches, even the switch port mapper doesnt seem to do it. If i use the oputils its switchport mapper actually works, but still does not list the port descriptions. I have 8 cisco switches and this is a critical element. thank you
Event Logging Report
Is there a way to run a report to view the errors or warnings in the event log for a server?
CPU Utilization Gauge Not Displayed for Cisco 4006 w/SupIII
Greetings, I have added a Cisco 4006 Catalyst switch running Cisco Internetwork Operating System Software IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(8a)EW1. For the CPU Utilization under Resource Monitors, I am using Router CPU Utilization(5 Mins avg) (SNMP OID .1.3.6.1.4.1.9.2.1.58.0 ) which answers correctly. This version of the IOS uses the older Cisco MIB 'OLD-CISCO-CPU-MIB'. At this time, I can't figure out how to display this value on the CPU Utilization gauge on
UCD MIBs for Checkpoint Firewall installed on Windows
Hi All I am writing management plugin for Checkpoint Firewall and get information from firewall through SNMP call . I am able to get value for RFC1213mibs & other checkpoint mibs from firewall installed on Windows. Not able to reterive details from UCD mibs. I am able to retrieve UCD mibs if Checkpoint Firewall installed on Linux,Solaris. But not able to get if firewall on Windows. Do anybody have solution. Thanks -Ariram
Seed Device Specification
Is there a way to specify multiple seed devices in Opmanager 6.0? I have multiple network devices that are not reachable from the OpManager server. This is by design. Thanks.
Wish List Item - Add a field for System Notes / Description
Part of the inventory process is defining the usage of each server. I'd really like to have a field for this description/information, which could be searchable.
False Positives
Since purchasing OpManager I've been getting a TON of "false positives" on a different array of devices. When I go into the device map I can Update Status and it clears up. If I don't do anything the error typically clears up in about a half an hour. I can't figure out what's wrong. Anyone else experience this issue? Or, have any advice?
SSH
Any idea when we will see SSH v2 support? I need this for some of linux boxes i need to monitor David
monitor non standard port
Hi, How can I monitor non standard port (eg. web server using 8080, etc.) Thanks.
WMI Based monitoring missing
how can I view or enable WMI Based monitoring in opmanager? RPC services are running on my linux box (opmanager server) and RPC services are also running on windows 2003 (monitored server)
Incorrect character display in Opmanager
Hi all, When customizing GUI web client to display Vietnamese language, I did the same guide as in http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002635317 but is only display correct character in static (text only) menu, help or windows (Eg. m�y chủ represent server). Other menu (with link) or choices or graphs, they appear as original character, not as VN character (Eg. m�y chủ - same text as previous example) I typed vietnamese in NCR-Hex keyboard,
Active Directory Add on
I have installed the free version and have confirmed that it is the free version in the about tab. Issue I am having is that it shows that the Active Directory add in has expired and it will not let me see the stats on my DC's. I am not sure how the AD trial was installed but I need to be able to see the stats on my DC's.
Unable to find object
I am currently running opmanager 6.0 on Windows2000 server, I have several servers that were being monitored without issue, but all of a sudden when I click on the server for info I receive Unable to find object. I've tried searching the object same issue, they still appear in the networkmap. I have also stopped opmanager executed RepairDB.bat, restarted opmanager. Same issue. Is there anything else I can do to fix this issue ?
Getting alarms of 100% Partition usage on CDROM drives
Is there a way to filter out the cd drive so that I don't receive errors when it thinks they're full? thanks, Mark This is using SNMP monitor : PartitionWiseDiskDetails.
Problems with MSP
When I try to update device status from sentral server I recive this message: Probe may be down/busy.Operation timed out The probe uses VPN connection to contact the devices.
Running Opmanager on virutal servers
Hi, I'm running the Central server under a VS and added a different VS to run the probe. but Opmanager uses 100% CPU all the time? The probe is used to scan customers network thru VPN tunnels. I have added 2 Customers network to this probe. but since the Central server and the probe runs with 100% CPU load. It is not running quite as expexted. It looks like Java.exe uses some of the CPU but I cant quite put my finger on any of the processes. Geir
How to add some text information on the LogInPage
Hi I want to add some stuff,text and picture, on the front page of the Opmanager web client ,the login page,(http://localhost/LoginPage.do) but unfortunetly I don't know how ??? It's seem that this is a dynamic page,so I can't config it directly. Please tell me how to do that. Thanks
OpManager and Applications Manager in same server
Hi all, Any problem to run OpManager and Applications Manager in same server ? I have OpManager running fine in this server.
thread monitoring
why opmanager can monitor the application threads, which mostly the cause of hanging of operating systems, we should have this module here
Reporting from opmanager database using SQL server 2005
Hello, I am looking to use SQL Server 2005 to create reports using the opmanager database. Do you have any information on this? Regards Andrew Abtec Network Systems.
auto-refresh
Hi everybody, i wonder if there is a way to auto-refresh the page containing the snmp-traps. Otherwise we are not able to ensure a pro-active management. Thank you. Kind regards, Chris
OPManager Layout View
Hi.. Need help!!.. In Opmanager GUI, HOME, there are module for customer view, infrastructure, business view and network view. How can we disable certain module, for example i want to remove the network module from appear in the GUI home. And one more in infrastructure view, how can i just display router, switch and server for the sub-view, remove others desktop, printer, etc. Its possible?? Hope you all can help..thank..
cannot add any windows service monitors - access denied
I can't add any windows service monitors to the servers I've added to OpManager. I've read that the account/password I set up has to be a local administrator on the remote server I'm trying to get info on - what happens if this is a domain controller & I can't add local accounts? I need to be able to add windows service monitors for all my servers, and I'd like to be able to use our domain admin account to do this. Please help - I need to get this set up and working ASAP Thanks, Aaron
Customer Monitor: tcpConnTable
I have a LANTRONIX terminal server and want to see the clients that are connected to the server. How can I read out the following as a customer sensor? .iso.org.dod.internet.mgmt.mib-2.tcp.tcpConnTable and get the output in a table form?? Cheers
Magnificent site!
Remarkable site at You! Only here I have found that so long and unsuccessfully searched on the Internet.
Several questions/problems
I downloaded and installed the trial version and I have some questions. - How come that the web interface is slow when using FireFox, when I use IE all goes fine but with FF it is slow and I must reload pages a lot. Also a lot ofpictures are not correct shown etc.. - Ho do I show CPU, Memory and Disk utilazation when I choose a server. I noticed when the server is in the same network it shows fine but when the server is outside the network it does not work. example opmanager runs on a server with
mysql backup
I am trying to move to SQL server for the data and I am following the directions. I am trying to backup my mysql data but for whatever reason the backup file is HUGE and I do not have enough local disk space. How can I redirect the mysql database to a different drive? Thanks - Chris
Listen to more than 1 mail address
I would like AdvenNet ServiceDesk to be able to "listen" to more than one mail address, not just e.g. "helpdesk@<MyDomain>. - Is this possible? - can different rules be applied to the different mail addresses used? Thanks Xavier
Active Directory Add in
I have installed the free version and have confirmed that it is the free version in the about tab. Issue I am having is that it shows that the Active Directory add in has expired and it will not let me see the stats on my DC's. I am not sure how the AD trial was installed but I need to be able to see the stats on my DC's.
Cisco 3640 Configure Interfaces applet empty
I have a Cisco 3640 I have set up with the proper SNMP and telnet paramters. I have set up the SNMP commnunities on the router, and enabled SNMP. When I click on the "Configure Interfaces" link, I get a popup with the column headers, but no interfaces listed. -David Conroy
Trap Receiver
Hi, I'm trying to use the trap receiver to verify that traps are being sent from various devices. I'm testing with a Solaris 9 server (generating the traps). I see the traps being sent out of the Sun Server pass thru a FW and arrive at my PC running the SNMP Receiver. The SNMP Receiver does not register that an SNMP Trap has arrived. Any thoughts? Thanks, Chris
Problems with DB configuration
Hi, I have a complete installation of Microsoft SQL Server 2005 (all components) installed on a virtual server which is attached to the local domain and patched with latest windows updates. I have opmanager installed and patched with registration license key. I run through the DB configuration instructions and when I input the details I use: localhost 1433 domain user and password (I have tried sa and domain password). It is coming up with connection error, verify the details. Can anyone shed any
OpManager Admin Client - VERY Limited Functionality?
Hi guys, After upgrading from OpManager 5.6 to OpManager 6.0, I have since been unable to perform activities which I usually used the Admin Client for. As you all know, the Admin Client is a stand alone application, and for me it was an indispensable tool. However, now, it appears I can ONLY use the Admin Client to modify my Business View maps. Nothing else. I cannot add new objects/devices, or use the rest of the features which I enjoyed using in 5.6. I have since updated to the new hot fix (6005)
Extracting the Correct Value of MemoryUtilization using SNMP
Hi ALL, THIS IS A GENERAL QUESTION REGARDING SNMP PROTOCOL. Sure someone in adventnet community can provide me a clue n drag me out of this problem. To Extract the Memory Utilization value,I have used the oid 1.3.6.1.2.1.25.5.1.1.2 (hrSWRunPerfMem) ,then summing up the individual instances values and dividing it by total available memory (hrMemorySize). But with this approach I am occasionally getting value exceeding 100%(as I repeatedly poll a target machine[windows / Linux device] for this value,as
Custom monitor OID always adds a .0 in the end
I notice while adding a custom monitor , Opmanage always adds a .0 in the end . This fails when some of the OID do not have a .0 here is an example of what we are trying Probing temperature The .1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2 is OID When I add it to the Custom Monitor it automatically makes this .1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2.0 . A regular snmpget on .1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2 works but fails via opmanger because it always looks for .1.3.6.1.4.1.674.10892.1.700.20.1.6.1.2.0
Next Page