Can I monitor Oracle 8,9,10,11 database/fusion using OpManager & SNMP?
If possible, what steps should I take, what must I install and configure from the target server side? What if it's a Windows host and what if it's a Linux host? What must I do on OpManager's side?
link OpManager to Desktop Central
How to link OpManager to Desktop Central?
Issue to add ESX 4.1i in OPManager
Hello, I tried to add ESX 4.1i in OPManager. I configured SNMP I configured SSH When I add ESX4.1i it starts to discoverd and stopped around 75% with error message Error occured while discovering the ESX. Kindly contact ..... I'm running OPManager 8 Build 8721 with MS SQL backend Thkan you for your help Regards Philippe
Loss of options for Traffic Map
We have updated from 8720 to 8721, and have lost the buttons on the business view that allow you to switch the view from normal lines to a traffic map. How do we get them back?
Report template to show OS + version of all monitored devices?
Hi guys, Going through the reporting I've been trying to get it to fire out one which would output the operating systems and versions on monitoring, reason for this being a license audit we're conducting and this would make everything a lot simpler. Any ideas on how this can be done? Thanks!
Syslog events reports
I've got free version of OpManager (as I undestand) to use it in my home. Wanted to make it watching my home cisco router. All I want is getting syslog reports to know what's going on with my router and prevent hacker's attack. I installed it, set up to get SNMP access to my Cisco, set up Cisco to use OpManager as Syslog server. Everything's ok, Syslog viewer show me everything, but I can't make it to show passed syslog events. I made a syslog rule that catching everything with Facility name "local
Minor Bug?
Hi everyone, I'm not even sure if I'd call this bug but I noticed something in op manager today. We were monitoring a Cisco PIX, and today it was replaced by a Cisco 881 router. The IP and SNMP information are still the same. I had Op Manager rediscover the device and everything looks ok except under "System Description". It still shows the PIX information in there and there's no way to clear it. It's not a big deal to me since the device type and everything is correct. The monitoring isn't affected
OpManager - ServiceDesk Failed Intigration
Hy, When Add Integration with ServiceDesk request info: Successfully tested and added the ServiceDesk details.Restart OpManager Server inorder to view Service Desk details. But try config ticket details: category from combo-box not listed priority from combo-box not listed technician from combo-box not listed Send attached log integration with sucess. ServiceDesk version: 7608 Opmanager version: 8271
Any way to recreate default dashboard and widgets?
Hi, In our OpManager8 (8721) deployment (MSSQL2k5 DB), our dashboard names appear like " @(dashboard.name.nwoverview)" and widgets have names like "@(widget.name.recentalarms)". Is there a scripted fix for the behaviors? Thank you.
Widget Utilization % Colors
Hello, I'm evaluating opManager, and it looks great so far. On the Dashboard Widgets, is it possible to configure the thresholds for Utlization % ? For example, Volumes with most Disk Usage starts showing a color Red at 90% and above. I'd like that to be 95% and above. Thanks Jay
Evaluation
Evaluating the product against a few others. Some of the SNMP settings on our Linksys/Cisco switches are not being discovered?? Any help?
Deleting alarms automaticly
Hello, I am using OpManager 8 to monitor Windows event logs. Specific events are creating alarms correctly and running a script. I need the script to run each time the specific event log message is generated. This happens in a production environment up to twice a day. If the alarm is not deleted OpManager will not run the script again. Is there a way I can automatically delete alarms in OpManager? Thank you.
Reset Opmanager password
How can I recover a lost or unknown password in OpManager? I have full access to the machine. MTIA Jason
check for missing eventlog on windows
Hi We are currently using MOM 2005, and need to replace it with something better :) - we use a feature called "check for missing" - which will give an alert if a given event has not occourd between a give timeframe - example 04:00:00 -> 05:00:00 each day Is OpManager able to do that? Thanks
Question about usr access to views / graphs
Hi all! I did not find anything on this, and I know it's a shot in the dark, but i would like to know if it would be possible to grant access to views and sites and the rest just by IP ? the reason why is because our NOC is being equipped with TV sets that have Ethernet connection, so that would eliminate the need of a PC connected for authentication purposes. I still need to double-check the capabilities of the named TV boxes, but is such a thing remotely possible? TIA raymond
Adding ARUBA ap's via snmp
Can someone please give me a walk through how to add aruba AP's to monitor using OPmanager?
HOST-RESOURCES Monitors for custom Template
Hi, I have created a new device template. Now want to add those generic SNMP monitors from HOST-RESOURCES MIB, but its not showing in this custom template. How do it proceed with this? FYI, the vendor is new name: McAfee -- Regards, Anandharaj System Engineer (Unix / Linux)
can not discover devices
When trying to discover devices, i choose a range of 10.16.100.1 - 10.16.100.254 mask: 255.255.255.0 I get back "please enter valid number. Anyone has any ideas on the issue. Thanks .Cesar
Number of alerts sent
Dear support , I using opmanager for monitor server , i want config every minute will alert ( email , sms ... ) until device / server become ok ( server down , network down , Threshold ... ) , how to config it ! Thanks alot !
I am unable to use Teltonika USB GSM modem to send SMS notification. Please help me out
I am unable to use Teltonika USB GSM modem to send SMS notification. Please help me out
OPManager 7 Database Problem
After hard rebooting the Windows 2003 SP2 server, we received an error on OPManager 7. The error states "Oops looks like a few tables got corrupted. Don't worry.. Run RepairDB.bat from bin directory and restart the server." We ran repairDB.bat and restarted the server serveral times but the problem persists. Please help us. Here's the results of the repairDB.bat myisamchk: MyISAM file ..mysqldataOpManagerDB efailover.MYI myisamchk: warning: 1 clients is using or hasn't closed the table properly
when will autodiscovery come back
I have been using opmanager since version 6 and the one thing that worked well, but has been removed from the functionality it the autodiscovery of the clients. I wonder when this feature will come back
Errors in the "list view" page
Dear all, I have a problem in my OpManager Professional (Build 8721) which refers to my Servers Map. If I open the server map in the "Map" view, i can see all of my configured servers correctly listed and, by clicking on them, i can correctly get all of the details. The problem is that, if i switch to the List View, i see the same servers listed many times up to the number of servers configured. all the others are simply missing in the List View. I've already tried to run a RepairDB with no success...
Netlfow plugin issue
Using OpManager 8 (Build 8721) with Netflow plugin (8500). When I select the "Netflow Traffic Analyzer" modules link, it opens just fine. When I'm in OpManager and I select an interface to view and scroll down, I see the login screen (see photo 1). I try logging in and then i get an unrelated view to what i was expecting (photo 2). If i refresh the page, it goes back to the login screen as shown in photo 1. When I try to test the connection in the add-on/products integration, it responds with
Device Availability report issue
Hi , We are using OpManager build 8721. While pulling device availability report of last 30 days through OP.In case of 100% up time it shows 20 days 21 hours is total up time. Also , almost all monitor availability shows approx 25% is not monitored .Hoever there is no shuch activity where we had not monitored. Pls refer to attached report .
Netfow plugin settings - change server settings
Hello, Running Opmgr 8721. Installed the Netflow Analyzer plug-in on the OPmanager server, than uninstalled because we have a separate Netflow server. When I try to add the new NA server, the Netflow settings screen keeps showing the IP address of the Opmanager server. Where is this information held so I can delete? This is the error I get when testing: Unable to establish connection to Netflow Server Thanks.
How to export the number of each server's error
How to export the number of each server's error report in opmanger by weekly?
NCM Decice Templates
I'm trying to import configurations from Cisco Access points. 1130AG 1252n I can add them if I do it 1 at a time but doing it that way there is no "Device Template Name" for either type of device. For vender I select: Cisco For Device Template Name: Cisco Aironet Access Point For Series I enter: 1130AG For Model I enter: Cisco Aironet 1130AG And it will add the device. If I try to add the device using the Import SNMP Device method the IP addresses for the access points are not listed. YES - All
ESX host in cluster not updating vm list
Hello, Running Opmgr 8721 with Vmware add-on. We have an ESX cluster with 3 nodes, 1 is currently in maintenance mode. Of the 2 that are active, 1of the hosts in Opmanager is not updating the list of virtual machines that it hosts. I have deleted (from the quick config wizard and removedbentriesnew), then re-added the host, but still the same issue. I will submit an email to support. Thanks.
OpManager data collection stopped Windows 2008 installation
Just add on to it, We have found one more issue,that is the OpManager suddenly stop monitoring the VM hosts which were configured earlier. But my Guest OS is still been monitored, again there also we have an issue.Even though snmp services is up and running on all the guest OS the OpManager is not able to resolve the snmp credentials and it's failing to monitor the CPU and Memory utilization. Don't know what is running behind but for sure we are facing a serious problem with these many issues having
Recent Alarms not clearing
I have the recent alarm widget configured on my overview page. I am running 8720. The recent alarms are not clearing after they are cleared on the devices that experienced the issue. Old alarms will stay in the "recent alarm" screen until manually cleared. Weve run Opmanager since version 7, but this issue is new with the latest upgrade.
Inventory Details
Hello All, I need to know whether it gives the system details like RAM size, HDD Size, Softwares installed, Software vendor and mainly System and Monitor Serial Numbers. Reagrds Sandeep
how can i make an availability report of all my switches devices?
Hi, i know i can make a report with one switch, that report show me availability this day, last week, lasth month, custom period, etc. but this is just for only device. i want to make a report with this features but including more devices in just one report. is that posible?? thanks for your help. regards
Problem with exchange monitoring
On the Transport section of Exchange monitoring I see that there's something strange: The Message Received Per seconds instead of reporting the number of messages per seconds grow at every refresh (I think he should report the "(current value - last value)/time interval". It's a windows 2008 machine with exchange 2007 sp2. Anyone have this problem ?
License migration
Hi! I would just like to ask about the license migration procedure. Namely, I am the OpManager administrator and I want to change my computer, so I also need to reinstall the OpManager. Also, is OpManager fully operative on Windows 7 x64?
Notification Profiles
The whole notification profile functionality needs a complete re-write. The "profile" should be based around the RULES that are applied to devices and not the MESSAGE that is sent/emailed as is currently the case. For example, I would want to create a profile or template for domain controllers that would monitor particular services and events. I would then save that profile and apply it to all my domain controllers. That RULES profile could then be associated with a message template similar to what
Migration to latest version
We're currently running version 7 of OpManager. We are looking to install the latest version (8.7) on a new machine, migrate over our existing settings to the new machine, and then decommission our old OpManager server. Is it possible to migrate settings?
Can OpManager support monitoring a folder and sending out files present via the notification system?
Can Opmanager be used to monitor a folder for the existence of small text files and then send out each one through its notification system? We have a variety of systems that generate short alarm text files (<200 chars) with a .alm extension that are placed in a known location on a server and then a notification system is needed that monitors this location and sends out any .alm files out to groups of operators via SMS or emails. We would also want to be able to send other extensions or predetermined
Syslog Report Problem
Dear All I have configure my Cisco 2811 router to send syslog messages to my OPM. in live syslog viwer i can see a syslog relating to FAN Failure problem on my router but when using Report==>Syslog Event , no event is shown, do u have any idea about such problem, how can i solve the problem? Regards
Monitoring IBM BLADE with OPM 8
Hello, How should i configured OPM to monitor IBM BLADE Center servers from ? Thanks.
Next Page