OpManager 8
hi all... i seem to get this error on all domain controllers.. anyone else having the same problems ?? all domain controllers seems to be ok with no other problems apart from this --> ( OS Processor Queue Length ) increasing the threshold seems to be the easiest solution..but.. will there be implications if threshold is increased..?? thank you in advance..FRESKO
OpManager 8
hi all... is it possible to import a visio diagram to the ( business view ) page of opmanager..?? thanks in advance FRESKO
RSS feed for patches
Gonna try to post this again.... Can we please get an RSS feed for the "Announcements" section? Also, I'd like to see a way to get a custom feed for all the products I use so I can stay up to date (rather than a feed for ALL your products). Thanks
server freezes but still respons on ping
hi, one of our most critical servers sometimes hangs up, when this happen people cant use our bussinessystem etc etc (the server is a sql server). the problem is that it still replies to ping, and no event logs are created until the server has been restartded. so we have a server that "tricks" opmanager that it is running based on ping answers, and we dont have any log events for triggering an alarm - what can be done in this situation if we want some kind of surveillance?
OpManager Reports
Could someone please explain, or point me to reference material, what/how values are used to develop report data for system uptime stats? i.e., what values are used to determine availabilty, total down time, onhold, on maintenance etc. metrics? Thanks.
Configuring OpManager another apache
Hi, here in my company we already have a apache installed in a internet server. So I don't want to use the embedded apache from OpManager. I want to create a virtualhost in my production apache and redirect to the server where OpManager is running. Some tips on how to do this? Thanks.
upload mib in trial version
Is it possible to upload mibs in the trial version? I get "unable to upload mib" for each mib file. Thanks.
Change interface utilization threshold
Where do the interface utilization threshold get assigned for a Cisco router? I cannot find the threshold listed for the router.
Remove device name or ip adress from device icon in the map.
Hi there, When I add an device icon into the map it comes attach with the device name or ip adress. I want to know if the attached device name or ip adress can be remove or also can be change from position, so I can make the map more viewable.
Running OpManager and OpUtils on same server
Hi, I'm running OpManager and OpUtils on same server. The problem is that when I login to OpManager I get logged out from OpUtils and viceversa. How can I solve this problem?
not show the database of instance
Hi all, I'm monitoring my MSSQL Server. I see the instance of my MSSQL, but not its databases. OpManager does not return errors, and wmi service is start on remote server. If I want to add a database, I can't, because the database list is empty. Loris
Remove text from device icon
Hi there, When I put the device icon into the map I get the icon plus the name of the device. I want to know if it is possible to remove the text (ip or name) of the device. and if it is possible how can I remove it. so I can get only the device icon.
OpUtil 5 install issues
Hello, Ive installed OpUtils5 on a linux box and am having issues trying to connect to the webserver instance. I accepted the default install port (7080), yet when I browse to http://ipaddress:7080 i get nada. (I did run the start script in OpUtils bin directory) A process table doesn't show anything that looks related to OpUtil. Not sure where to head from here. Suggestions?
MRTG like view of the traffic graphs
Hi, It would be useful to have a view of the traffic graphs like in MRTG where all the graphs are shown on one page, two columns (customizable) because then its very easy to correlate the peaks on different servers with for example the peak on the Internet port.
SNMP Trap Processor using a MIB
Dear people, Im tryen to add a SNMP Trap Processor using a MIB from HP. I would like to add the following mib: cpqcr.mib from the upd830Bmib.zip (HP MIBS) file. But when i add it i get the following error: IMPORTS failed: Could not open file C:/PROGRA~1/ADVENT~1/ME/OPMANA~1/./mibs/CPQHOST-MIB I copied all the mib to the mib folder. Anybody?
Opmanager license
AMS how to keep to pay this ? i'm want to pay license one time per Opmanager version [ex] pay Opmanager 8 profressional 50 license pack without AMS how i can pay this option ?
Currently, OpUtils does not support localizational language (Korean) in the webclient UI.
Dear all, Currently, OpUtils does not support localizationa language in the webclient UI. Can you support it when?
Installation woes (OpManager 8 / SQL Server 2005 Standard)
Hello all, I'm currently trying to install OpManager 8 using a SQL Server backend (instance), e.g. Hostname = <ServerName>\<Instancename> but keep on getting the Hostname is not recognised error. Am I missing a trick here? Cheers Chris Fenton
Monitor SQL Server 2008
Does OpManager support the monitoring of SQL Server 2008? thanks Mike
Real-Time Dashboard Widgets do not indicate when a threshold is breached
Hello, Real-time dashboard widgests should be customized to enable flashing RED or another color when a threshold is reached or breached. This way one would not need to remember the various therasholds for each monitor. Cheers, LeRoy
SCHEDULING SINGLE PORT SWITCH/ROUTER REPORT
Hello, there's a way to schedule a single port Router Interface rx report? In the detail, we need to schedule this report: thank you
Device Down for over 3 minutes but no Alerts ?
Hi, We have a number of Nortel Passport switches, we have set monitoring poll for every minute with an e-mail alert notification for 3 missed polls. According the reports the devices were down for a period of 3 minutes 31 seconds, but we did not receive any alerts for this. The down time is for 5 days ago, but i cannot find anywhere that will give me the granular detail that i need, the exact polls that it missed, weather they were consectivie polls or over a given period. Can you advise please.
ssh config for opmanager
I am trying to monitor via cli on linux redhat systems. I can putty to the system but can not get opmanager to connect. what is the best config for this ?
Port Number Change
I realize that there is a Change Port number .bat file that I can use to change the port number that OpManager is on, but mine doesnt seen to allow me to change it. Anyone got suggestions on how I can change it another way? Please replay as soon as possible. Thank you! James
Cisco Energywise
Hi, We are currently looking for 3rd Party managers for Cisco's energywise so we don't have to use the dreaded cisco works. I know solar winds supports this and as an opmanager user i was wondering if there is planned support for any of your products? thanks, Matt Pollard University Of Abertay
Internal Server Error
Hi, We have been running Opmanager without problems for many months. Today, however, we cannot log into the system with the following error: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, admin@india.adventnet.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the
VMWare ESX 4i
Is Opmanager able to monitor ESXi or only ESX? Also - has anyone else had problems with the search forum function. It always returns zero results, no matter what you search for?
Change Linux CLI memory count
Under Linux OpManager will look at the used memory and then display that, but this information includes the file cache which results in a value almost always in the high 90s and renders the counter useless. What OpManager needs to do is take the value of used minus the buffers and cached values to return a value of how much memory is really tied up, since file cache can be dropped instantly and thus there's no reason not to use all memory not allocated to applications for the file cache. e.g.
how can I monitor Active directory and Exchange
I have enable snmp on my domain controler. Opmanager can monitor CPU, MEMORY, AVAILABILITY ect. but it can`t monitor AD Store, LSASS, NTFRS, NETWORK, PerFormance Counter. I want to know how can I enable those monitors. I also enable snmp on my exchange server. I also can monitor the above mention monitors on my exchange server. but when I add the exchange monitor I get the status exchange service is Down. Can someon help to fix it?
Is Custom WMI supported in OpManager Enterprise yet?
For us to use the product we need to be able to add performance counters (in the same way that you would using perfmon when monitoring a Windows box.
Setting up alert by partition utilisation
Is there a way under 7205 (or later) to alert according to disk space use by partition rather than overall disk utilisation?
"An interface with this IP already exists for the device" error
Today we added a new UPS to our systems. We gave it an IP of 192.168.1.31, added the hostname and IP to DNS and it is working great. When we tried to add the device to Opmanager we got the following error: "An interface with this IP already exists for the device calnt19.teraint.net" This is not possible, as calnt19 has no interface with that IP. Here is the output from ifconfig /all on calnt19: Windows IP Configuration Host Name . . . . . . . . . . . . : calnt19 Primary Dns Suffix . . . .
What is the easiest way to monitor the environment Temperature in the serverrom
Hi, I would like to monitor the temperature in the serverrom. I guess the easiest way ist to monitor the node of the APC UPS. But in the template i can't find this monitor, so i added a new monitor with an apc mib. How? Adminpage -> Device templates -> going to "apc ups" and then click on "add monitors". I loaded the apcpower.mib und found an entry called environmenttemperature (SystemIOD .1.3.6.1.4.1.318.1.1.2.1.1.0), set the threshold and finished. But now i don't get any data. SNMP Cridential
False Alerts
All, How do I keep from receiving the following Alert: Message: sysUpTime.0: 16 days, 9 hours, 0 minutes, 8 seconds. , snmpTrapOID.0: .1.3.6.1.6.3.1.1.5.3 , ifIndex.24: 24 , ifAdminStatus.24: up , ifOperStatus.24: down , .1.3.6.1.4.1.674.10895.3019 Charleston Dell Switch Ethernet Switch Device: 192.168.113.195 - Charleston Dell Switch Category: Switch Error Condition: Critical Generated at: Oct 27,2009 07:36:13 AM I have already unmanaged the ports I do not want to manage and have also remove
SMS Modem Hang
Dear All, I Manage Registered OPManager with SMS notification via modem, why OPManager sometimes don't send notification via modem, it seems modem hangs.. So I must reconnect modem and unplug& plug the modem then restarting Opmanager to make modem working again...Why should i do to make modem working properly My OPmanager version : 7201 My Modem Type :WavecommModem Model : Multiband900E1800
How to Monitor SNMP and DNS Service by Opmanager ?
I have Monitor Servers SNMP and DNS Service by Opmanager . My SNMP , DNS ,HTTP , NFS Servers Service is START. but when i add SNMP , DNS , HTTP , NFS , Oracle service to Service moritors Tab of Opmanager for monitor this services, HTTP , NFS , Oracle Services status are ok. Why The Opmanager show Alert SNMP Service is Done and DNS Service is Done ???
MSSQL Monitoring and MSSQL 2005
Hi guys, I'm not sure if I'm missing some documentation, but is the MSSQL Monitoring Add-On able to monitor SQL Server 2005? According to many sites on the internet the SNMP capability was removed from this version. I have tried to monitor my SQL instances, with no luck. Thanks in advance, Jose.
After changing time to DST, wrong time appears on graphics and reports.
The Windows Time has been changed to DST (1+ hour), both Application Server and Database server, but the OpManager is still showing the previous time. Could you help me, please? regards, Gabriel
Message: sysUpTime.0: 16 days, 9 hours, 0 minutes, 8 seconds. , snmpTrapOID.0: .1.3.6.1.6.3.1.1.5.3 , ifIndex.24: 24 , ifAdminStatus.24: up , ifOperStatus.24: down ,
All, How do I keep from receiving the following Alert: Message: sysUpTime.0: 16 days, 9 hours, 0 minutes, 8 seconds. , snmpTrapOID.0: .1.3.6.1.6.3.1.1.5.3 , ifIndex.24: 24 , ifAdminStatus.24: up , ifOperStatus.24: down , .1.3.6.1.4.1.674.10895.3019 Charleston Dell Switch Ethernet Switch Device: 192.168.113.195 - Charleston Dell Switch Category: Switch Error Condition: Critical Generated at: Oct 27,2009 07:36:13 AM I have already unmanaged the ports I do not want to manage and have also remove them
URGENT: SNMP credentials stopped working
Hi, I've just noticed that all my servers stopped showing SNMP CPU and memory values. WMI is still working. I've already checked: the credentials are correct SNMP is running SNMP requests are accepted from opManager server restart of SNMP service on device doesn't help restart of opManager server doesn't help reading an SNMP-value(sysuptime) from opManager mibbrowser times out reading the same SNMP-value from another SNMP-Testprogram on the same server returns a correct value The only configuration
Next Page