ASPX Pages?
I can't seem to monitor ASPX pages using OpManager. I thought I saw somewhere that the latest hotfix (6012) corrected this problem? David.
If SNMP required for Interfaces now?
If my memory serves me correctly, shouldn't you be able to monitor Tx and R x traffic without the need for SNMP? I know for a fact I have done this before, as my previous environment prohibited SNMP service being installed on the servers. Nevertheless, I was still able to set up interfaces to have monitored in Opmanager.
Cisco Tools
It would be nice to have a way to add devices so when you select the drop down for Device Name/IP Address I can select a device that has been added already. For instance I already added almost 90 routers, having these available through the drop down would be nice.
Procom MIB
Hi all, someones know where I can find some MIB for Procom Netforce 1750 and 1800? I require them to monitor server temperature, but I can't find them, also because the official Procom site is offline long since. Thank you! Daniele
Hi
hello
How i Must configure Mail Settings If i have an Exchange
How i must configure the mail setting option if i don't have a smtp server, just an exchange server, course that server has a SMTP. Regards
How to enable MIB or SNMP in Windows
Hi, I have installed the trial version of Opmanager in my Windows 2003 server. I am not able to see the graphs and monitor the desktops and servers. I came to know that i need to configure MIB or SNMP. I tried both but it is not working for me. Can you please guide how to configure the MIB with OID and let me know how to monitor each servers. Looking forward for your reply. Regards, Harish.S
Oputils Bandwidth Monitor
When I try to use the Bandwidth monitor it does not give me any information on some Cisco devices. 2 that I tried are the Cisco Cat 2950 switch and the Cat 3512. And the Colors seem to be off in the graph. On the bottom it has red for out and Green for in, but maybe since they are on top of each other the red is dark green and the in is still the same light green. Thanks, Mark
How to change port 8009 and 8005
Hi, Ports 8009 and 8005 are in conflict with the web interface of "VMware Virtual Center 2.0.x" (based on tomcat). How to change port 8009 and 8005 in Opmanager ? I tried to modify file ../conf/ports.properties, but when I start OpManager, the service hang and I get a web page with "Internal Server Error". Best Regards, DPE
Domain Controllers
Is there any way to keep my domain controllers from going into the domain controller category view? I do not have licensing for the domain controller monitoring, and want my domain controllers to be treated as regular servers. Annoyingly, I have to move them back to the server category frequently. Could you change the program so that if you do not have a license for the domain controller monitoring, it doesn't automatically discover domain controllers and move them? Thanks! Shawn
Alcatel - Error Parsing MIB
Getting parsing error when attempting to load the attached MIB. Can't find anything wrong. Can someone help validate the contents? Thanks in advance!
Trial Probe
If we install a trial probe somewhere, can we convert that to a licensed probe or do we then have to re-setup a probe? Thanks
Ability to set Thresholds in MB?
I have a server with a rather small hard drive. It would be nice if I could set the "critical" threshold in megabytes, but the "clear threshold" level in gigabytes. Any possibility of this? David.
Migrating to Opmanager MSP
We are thinking of replacing all our OpManagers by OpManager MSP. Is it possible to export all the settings from to current Opmanager installations and import them into the OpManager MSP probe?
Scrolling problem in OPM client
Hello, I am unable to scroll the entire bkgrnd image in OPM client when I add one in a business view, however I can access the entire image through webclient. This problem does not allow me to place the devices in areas where I want to. Any help is very welcome. I am using OPM 5.6. Thanks in advance.
MSP Edition, how to monitor MS-SQL Server
Hello, i didnt found anything to monitor MS SQL Server like in the premium Edition, how to do it with the msp edition, do i need to buy an addon for 498$?...or is this currently not possible? Yours Oliver
Connecting devices between submaps
Hello, Is it possible to connect devices between submaps. I am using OPM 5.6. Thanks in advance.
A few questions
What is the difference in the pricing for the single license fee for the 1 user pack and the 2 - 5? Is this the number of people that can view it at one time? If I put this on a server, am I able to http to it? What would it take to get some more details on say the switch port mapper? I'd like to see duplex. Would that be available? Mark Kraus
Uploaded MIB shows as Undefined in MIB Browser
I uploaded a MIB I downloaded from APC's web site. I uploaded it into OpManager. Now when I select it in the MIB Browser list, it does not show the MIB tree. It only shows the word "undefined". Anyone seen this or have any ideas? Sounds like a problem with the structure of the MIB file.
Can I Monitor active directory logins?
Does anyone know how to monitor when and where active directory user logins are used? I want to see when, where and what my domain admins are logging into. Thanks!
rename an email profile name
Is there a way to rename an email profile name?
Rogue Detection DB Enhancements
How far out is the ability to add a description to Rogue Devices so that once I clear them - I can also tell what they are. Also the ebility to move from cleared to uncleared and visa versa.
Directory monitoring
Can OpManager monitor a directory on a network (either through share name or UNC) and tell if a file is placed in that directory or deleted or changed. I have an application that creates a text file daily at approximately the same time of day and need to find a monitoring solution that can check to see if the file has been created. If the file has not been created by a certain time then I would like an alert in OpManage generated. Is this possible Thanks Rob Holmes Guelph General Hospital Guelph
I Need add a new view(catagory) under Infrastruture Views
I have been reading the forum posts and I was wondering when the option to add new views or categories would become available? I created new categories under Business Views fore the time being. We are running Op MAnager 6.0 Build 6011 License Type Premium. Thanks, MC
Clustered Exchange 2003 WMI Monitoring
I am running the free version of opmanager as a trial to see if it is something I want to purchase. I am trying to get the WMI Exchange 2003 application monitor running. It keeps telling me that the class is invalid when I try to add it. I have rebuild the counters, and have comfirmed in perfmon that I can see, and collect data from the counters. I can add a WMI counter for CPU, Memory, Disks.... so it isn't a permission issue, any thoughts?
E-mail notification problem
Hi, I can't receive some mail notifications when I receive TRAP. It works for some devices but for some I can see following printout in the log: 15:04:37:343 Notifications: alarmCode in checkAndNotify properties: {MSSQLSERVICE=no, MSSQLMONITOR=no, CLEAR=no, EXCHANGEMONITOR=no, SERVICE=no, ADMONITOR=no, WINSERVICE=no, EVENTLOG=no, INTF=no, URL=no, THRESHOLD=no, STATUSPOLL=no, TRAP=yes, CRITERIANAME=10.243.176.224_1203, EXCHANGESERVICE=no, ADSERVICE=no} 15:05:36:437 Notifications: alarmCode in checkAndNotify
build 6012
Is there any release note for the hotfix 6012? I'm currently using 6010 and want to know if its worthwhile me upgrading? Thanks
no option for device icon change
Hi, I am unable to change custom device type icon in opmanager client business view for a device as it does not give me the option of "change icon..." when I right click the icon. I am using opmanager 5.6. Any help will be very welcome. Thanks in advance.
Javascript
Hi everyone. Just new to OpManager, found it very useful and a great product. I installed the free version, and got into the 'object required' error on executing scripts (calling help, for example). I found replies on these forums about clearing the cache and relaunch the browser (IE6 in my case), but no information about the Java machine required. I'm currently using IE6 on a Windows XP SP2 machine, JRE is 1.5.0 rel.10. I tried almost anything, but no luck so far... Most of the code generates the
After installing upgrade
After I installed the upgrade and configured WMI for my mail I got the critical error. Does anyone know how Ican resolve this issue ID=8021 Source=BROWSER Type=2 Message=The browser service was unable to retrieve a list of servers from the browser master \\HUMMER-ADFS on the network \Device\NetBT_Tcpip_{CBFF06D3-3867-44B2-B6EB-624
license pop up
after uninstalling opsmgr after trial, how do you remove the enter license pop up that comes up when you boot the pc?
FreeBSD support
Are their are any plans to support OpsManager on FreeBSD. I tried to install it using FreeBSD's Linux compatibility package and get "ELF binary type "0" not known." error when trying to execute binary installation file.
E-mail notifications limits
Hi, Could you please tell if there is limit in generating e-mail notifications by OpManager? I mean is there any limit per minute or seconde for mail notifications? Thank you in advance, Br, Ivo
Which edition? Do I need MSP?
Hi guys! I've just checked out the trial edition of OpManager, and I think it is truly an awesome product! However, I'm thinking I may need the MSP edition. Do I? We are an engineering company with 18 offices in 3 states. We have DCs at each location, as well as Cisco Pix's file servers, etc. In one office we have exchange, some web servers in several offices, etc. Would we benefit from using the MSP edition? What could the MSP edition give us that the regular edition doesn't?
Restoring errors
Hi Support Team, When i tried to restore the backup archive got following errors. Please identify whats is the root cause behind. Thanks. Babrus C:\AdventNet\ME\OpManager\bin\backup>restoredb.bat/sh backup_dec22_2006_11_54.data ******************************************************** * Warning!!! Attempting to restore the data !!! * * This will result in loosing your current data!!! * * Press Ctl+c to quit the operation. * ******************************************************** Press any key to
Incorrect password locking out account
We went through our monthly password rotation and somewhere in OpManager a login is using an incorrect password. I have checked all of the server and desktop items, but none seem to have the username with the incorrect password. Is there a tool for MySQL that will search for any occurence of the incorrect password in any table and let me update it with the correct one? If not, how can I clear the database of ALL data, other than uninstalling and reinstalling the entire package? Thanks. -Eric.
Same traps, different severities
Hello, I am looking for a way to set trap severities to be different, depending on the device they are coming from. For example, a link up trap should be "clear" from a server, but "attention" from a switch. We have multiple places under Enterprises where this would be useful. Can this be done?
How to ping an ip adress?
Hi! Using OpManager 6011. How to set up a ping with an ip adress just lite URL monitor? /Thomas
SNMP Write Access to devices
I am new to opmanager and SNMP in general and have a few questions I hope you can help me understand. Is security a big concern with SNMP? Or should I stick with the default "public" and "private" community names? How much access does OpManager need? If I only enable the default public read, will I be able to do everything in OpManager? What does write or change permissions in SNMP get me? Thanks for the info. Any thoughts on the subject would be appreciated.
Add device sits to infinity?
Hello everyone! I'm trying to add some machines to OpManager, but every time I fire of Add Device, the page sits with the hourglass. I've tried this on firefox as well as internet explorer, and at this point I've left it running for more than 30 minutes. This happens on machines regardless of whether I have snmp enabled on the system or not. Any suggestions on how I might correct this? OpManager is great, but I can't seem to add any more devices to monitor! Thank you, Pete
Next Page