At a glance Report in Opmanager 12.0
In previous versions of Opmanager we can export the At A Glance reports to PDF and even schedule this report. With version 12 we cannot find the way to schedule the At a Glance reports, and we cannot even export to PDF. Can someone advice us on how we can resolve this issue?
Monitor CPU core in SUSE Linux
Can OpManager monitor SUSE linux 11 CPU core in HP server?Currently i can monitor CPU only.
Standalone ESXi\Hyper-V and OpManager 12.3
Hi All! I need monitoring VMs in standalone ESXi\Hyper-V hosts - how to ??
Missing Message text
When i get the email from the opManager it doenst give me any info just the Variables Title $message $stringseverity Message This Server is low on RAM or HDD Space Device: $displayName Category: $category Error Condition: $stringseverity Generated at: $strModTime Device Type: $DeviceField(type) Disk in GB: $DeviceField(hardDiskSize) RAM in MB: $DeviceField(ramSize) IP Address: $IntfField(ipAddress) Alarm Details Message $message Device Name $displayName Category $Category Error Condition Attention
OpManager Web Login
Hi all, When i try to login to the web portal of OpManager at the IP: 10.10.1.10:8181 it keeps loading and then failing in the end, however login from localhost on the that machine works fine. what could be the issue. Thanks
How can I upgrade OpManager from version 11500 to 12200 ?
Hi Support, We plan to upgrade OpManager from version 11500 to 12200. May I know any upgrade path for this task? BTW , is there any guide for upgrade procedure or best practice? Please kindly advise. Thanks Kidd
Customizing Widget size
I'm not sure if this is a familiar problem but is it possible to size Widgets the way i like in the dashboard? I went to customize widget, but there was no setting to size the image. thanks
oid value dec to hex and next to floating point number 32 bit
is possible make this in opmanager, i have a OID with the next value 1085738763, i need convert to HEX and next make this.
Opmanager Exhnage 2010
Hello, when i try to add performance monitor ..i dont have option for Exchange monitor...but i have option for Lotus Monitor. What can i do to add MS Exhange Monitor THANKS!
Any URL Down Trigger for Workflow not working
Build: 12200 Have URL Monitor on for specific URL (See screenshot 1), manually triggered by stopping the service on the host to put the URL in a down state. Have a workflow attached to the device that checks the URL and if it's down restarts the service and is supposed to send an e-mail. The trigger for this workflow is "when any URL Monitor is down" (See Screenshot 2-4) If this is configuration issue please let me know, if it's truly not working can I get an ETA on when this might be fixed. Thanks!
Opmanager service stops running
We have 2 Opmanager servers running in failover with another server hosting the SQL database. Since last night, the manageengine service starts and directly stops on the opmanager server. On the other opmanager server, the service starts but stops working after a couple of minutes. The windows event log doesn't show any errors at all. How is it possible that the service stops working overnight?
Unable to add VCenter
Hi, I am trying to add the VCenter with SSO Credential in Opmanager v12 and I am having an issue that shows "Add Device Failed". Any Suggestion? I tried with Domain admin and also SSO (administrator@vsphere.local) but still got no luck. Thanks
Missing Operators for Thresholds on SNMP Monitor
Hi Community, This is probably something simple, but has me stumped right now. I just added a new SNMP monitor for our Blue Coats (.1.3.6.1.4.1.3417.2.11.3.1.3.5.0). For those familiar with Blue Coats, this returns the value of "Server Workers currently active" and it's working great and generating graphs: The problem is that I cannot set up proper alerting as there are none of the normal condition operators for the thresholds as below. In particular I am looking for the >, < and <=. They are there
Is there a replacement for OpStor Storage Manager in OpManager
I was wondering if i can monitor and manage storages like IBM V9000 in OpManager? you use to have OpStor Product and now you dont support it anymore, can OpManager do the management of Storage Regards serak/
OpManager 12.1 Enterprise - Vcenter auto discovery not discovering all of my VMs
I'm having an issue with VCenter auto discovery not discovering all of my VMs. My Vcenter server in OpManager shows I have 142 VMs VM auto-discovery is only finding part of those - this install 76, the last install 38, and the first time I installed it - 52 (these numbers are including my 15 ESX hosts). I called support about the issue yesterday and they wanted me to completely uninstall Central and the probe. Then reinstall both, apply the license, add credentials, then rediscover VCenter. If
Event Monitor OpManager 12200
We have an Event log Monitor that monitors a specific Event Log for a Specific Event and then alerts and sends out notifications. We had an issue yesterday where the event was created but OpManager did not pick up the alert. Even after recreating the event via powershell, OpManager did not pick it up. I fixed it by rebooting the OpManager server but i am curious if there is anyway, without Event log Analyser, to actually see the event log from within OpManager and see exactly what OpManager is monitoring..
WLC Access Point Names
Good day, I've added our WLC to OpManager but instead of showing the AP names, it just shows the MAC addresses. How Can I fix this?
Error MIB file
hi all, i need upload mib file to opmanager but when i was running on mib browser there is error is there someone to help me ? thanks Error parsing MIB:TKD-MIB-SF-SMSGW.MIB Exception while loading MIB:Could not parse the file /opt/ManageEngine/OpManager/mibs/TKD-MIB-SF-SMSGW.MIB. Couldn't resolve these MibNodes : { tableIndex }
Netflow analyzer receive muiltple port whileMonitoring Huawei CE6851-2C(DataCenter switch )
Hi all i was trying to Monitor My Huawei CE6851-2C switch on netflow analyzer, when i issued following commands on my switch , OpManager receive more than 10 interface , and i can figure out which on is the port i want , and i was wonder i just only enabled netstream function on one interface, why OpManager display these interface . <xxxxxx>dis netstream all netstream aggregation ip protocol-port enable export version 9 netstream export ip source 192.168.1.1 netstream export ip host 192.168.1.2
How to correct MIB/OID in Op Manager
I need to correct the OID on these items on my servers, I found the OID on the linux machines are different from the ones on op manager. Kindly assist me on this matter.
V12.1 rediscovery is faulty
Hello For example i have discovered device MYCISCOSWITCH then it names the interfaces based on their description as you can see below in the picture Lets say I change the description of GigabitEthernet2/2 from TRUNK to ACCESS and then rediscover the device by using the tool you have integrated(see the picture below) then it remains GigabitEthernet2/2-TRUNK, but it should change to GigabitEthernet2/2-ACCESS The only chance to make this change work is delete this device and then discover it again.
Unable to log ticket to SD Plus
Running Latest version of OpManager 12.2 and SD Plus 9232 and seem to have an issue logging tickets. Every time I configure a notification to log a ticket, when I reach the step to name the profile I receive the following error: This API is used by OpManager for its internal operation, and you cannot access it. I configured the technician key, server, port, and credentials. Not sure why I can't get this to work. This used to work in all previous version for me.
Problem in Monitoring Windows Server 2016 and Hyper-V 2016 by OpManager v12.2
Hi, I am having problems with OpManager detecting that windows 2016 servers are Hyper-V enabled. I removed them from OpManager and again added all the servers to OpManager (with WMI credential) but they are being categorized as Windows10 and not virtual devices. Is this a known problem with a workaround?
device edit menu does not render properly in Chrome and Edge on Windows 10
Is anybody else having this problem where the device edit menu does not properly render so several of the options/buttons don't show including the actual Edit Device option? See attached screen shot. The buttons are hidden. I've see it render properly in yesterdays session with Edge where the buttons show up in two visible columns but not today. Today it shows like it always does on Chrome where you can't see all the buttons.
ifindex interface names
Hi, If netflow confiuration and SNMP configuration is correct, why would OpManager display "IfIndex" as the interface name? Using NFA 12.2 and exporting flows from Cisco 4507
RAID Monitoring on OpManager
Hi, I would like to ask that Is it possible for OpManager to monitor the RAID and Can detect any RAID failure? Thanks
Netflow plugin update problem
Hi, I've updated opmanager from 8810 to 8812 but I'm not able to update the netflow plugin from 8500 to 9000. The update process seems to not install any files and continue to run indefinitely (It run for about 1 hour without any reaction for the update window. Checking on NetFlow directory I see a update.log file with some errors inside: Unable to load Disk Space related native library. Exception in thread "Thread-2" java.lang.UnsatisfiedLinkError: getFreeSpace at com.adventnet.tools.update.installer.DiskSpace.getFreeSpace(Native
Servicedesk Plus and OpManager 12200 Integration
Good Afternoon We have a question concerning the integration of these two products, Is it possible to set the MODE within this integration so that we know the ticket came from OpManager? We have the integration working and only sends over tickets that need to be sent over but without this option the stats for MODE are almost worthless. I have attached a screenshot for the options available. Many thanks for your help.
OpManager Linux servers question
There are VM servers monitor by Opmanager VM servers are hosted on RedHat xen-3.0.3-146.el5_11 Is there any methods to monitor each CPU core similar to "ESXi VM servers"?
Dashboard OpManager 12.2
Hi, I manage to import and key in manually all information of inventory in OpManager for the monitoring purpose But, it's nothing show in Enterprise dashboard, server or network dashboard How to make the information shown in the dashboard?
Passing SNMP OID Names to notifications
I am trying to figure out a way to pass an OID name to a notification, so they are more meaningful! For instance, right now, I receive a message that says: Message: taitTN8291RemoteNodeUpEvent is received from x.x.x.x.20000000001 with the following related information : sysUpTime.0: 188 days, 1 hours, 46 minutes, 38 seconds. , snmpTrapOID.0: .1.3.6.1.4.1.3570.3.3.3.0.20 , .1.3.6.1.4.1.3570.3.3.2.7.1.1.6.5: 3 , .1.3.6.1.4.1.3570.3.3.2.7.1.1.7.5: 2 , .1.3.6.1.4.1.3570.3.3.2.7.1.1.3.5: 1 , .1.3.6.1.4.1.3570.3.3.2.7.1.1.4.5:
OpManager - Web Application Potentially Vulnerable to Clickjacking
As a result of our last scan we received notification of the Web Application Potentially Vulnerable to Clickjacking within our OpManager server. The Solution: Return the X-Frame-Options or Content-Security-Policy (with the 'frame-ancestors' directive) HTTP header with the page's response. This prevents the page's content from being rendered by another site when using the frame or iframe HTML tags. I found the solution for Service Desk but not for OpManager. https://forums.manageengine.com/topic/manage-engine-web-application-potentially-vulnerable-to-clickjacking-return-the-x-frame-options-http-header-with-the-page-s-response
Need to monitor latency or timeouts on network interfaces
Hello, I am getting reports from my application team that there is either latency or timeouts on the network. Opmanager does not allow to do connectivity checks shorter that 1 min, which is too long of an interval to identify such issues. How can I monitor either switch ports or servers to prove or disprove this claim?
Opmanager stopped sending "device not responding" alerts
Hello I am running opmanager 12.2. Opmanager suddenly stopped sending "device not responding" alerts to emails, but it shows in opmanager correctly in "Alarms" section when device goes not responsive to opmanager. I haven't made any changes to server lately except I installed site24x7 on-premise poller about a week ago and tried to use it. The pollers service/process has been in shutdown state for few days now and I can't uninstall it. I think that the on-premise poller installation messed opmanager
Help with SNMP and MSA P2000
Hello, I try to get events from our MSA P2000 G3. My steps: - Added OpManager Host to Trap Host 1 Address, Notification Level - Information (for testing), Read Community - Public, White Community - Private. Nothing else. - In Opmanager I successfully discovered device. - Created E-Mail Notification, chose Criteria: Hardware in problematic condition, Interface or switch port has some problems, when any SNMP trap is received from the device (chose all traps), When any Configuration is changed, when
Rule Engine Failing to Add Script Monitor
Hi All, I have just created a script monitor which I would like to deploy out to all windows computers and the only way I could see to do this in bulk was to create a new rule in Rule Engine. Currently the rule has the following criteria and is set to match on all criteria: Criteria Condition Value Type contains Windows Vendor equals Microsoft The action for the rule is as follows (the name of my script monitor is 'Service Account Audit'): Action Action Properties Associate a Script Monitor Service
Sync asset name and details in SDP
Hi, I scan a switch in OpManager and edit device details like vendor, Category, RAM, etc in related form. I integrated OpManager with SDP, When I click on Sync Now button my asset imported in SDP, but my custom details like vendor, category,RAM, etc not imported and just add these IP without any details and put in unknown workstation category. What should I do? I want to use OpManager for assets discovery and integration with SDP. What's your solutions? Thanks
Hello all ,
I just install ManageEngine on my pc for testing. and when open webclients it request username and password but during installation I did't put username or password plz help advices
How to adjust the dashboard column size ?
Dear Sir / Madam, I using the new version 12.1 of OpManager, when I configure the dashboard and add widget of Business View on it, but it cannot let me adjust the dashboard size. Please help. Joe
Windows Mount Points Opmanager 12.2
Is there support for Windows Mount Points in OpManager 12.2? I currently cant move from 11.6 until we can monitor mount points.
Next Page