fortigate change detection
hi i have a question about the change detection for a fortigate. if i enable the option from disable to enable. the operation status show that the change detection is ok but the real-time change detection is still disabled if i check the fortigate the config is changed the syslog is added Operation Status : Enable Change Detection Real-time Change Detection : Disabled [Change] Regards, Roel
CopyRunningToStartup FAILS?? How can that be?
I have tried to get rid of some differences in the startup and running configs but I only receive errors. Here is the output regarding the error I receive. ================== copy startup-config tftp 01SCMRTR01#copy startup-config tftp Address or name of remote host []? 10.1.29.176 Destination filename [01scmrtr01-confg]? 2_ConfigFile.txt !! 3957 bytes copied in 0.272 secs (14548 bytes/sec) 01SCMRTR01# Entered into the enable login mode successfully. copy running-config tftp Address or name of remote
DeviceExpert 4300 Available!
Hi, Thanks for your continued interest in ManageEngine DeviceExpert. We are glad to announce the availability of DeviceExpert Build 4300. Highlights of the release: Support for Configuration Rollback Enhanced Configuration Change Management Policies Scripting Support Hardware Properties Retrieval on demand Disaster Recovery Tools Support for more than 300 device models from 16 Vendors , including Force10 And much more... For more information, visit Release Notes. Download Full 4300 Build http://manageengine.adventnet.com/products/device-expert/download.html
User level and the command username
Hi, If I give a user the right to see the config, he can see the username command inside the config. Even with the Service password-encryption set it's easy to see the password of everybody ! What do you suggest ? Regards, JC
Missing changes while triggering a conflict.
Hi, everybody. I have recently updated my DE from 4010 to 4210. Everything's fine exept one thing: I have a cisco switch Catalyst 2970G_24T managed by DE. Well after an upgrade I metioned that changing the description line in interface configuration toggles no Running-Startup conflict. Is it a propper behaviour? Thanks for any support. Ilya Serov.
Running DeviceExpert in Vista
Hi, Do you face issues in running DeviceExpert in Vista Business? If so, just follow the steps detailed below to fix the same: The fix for starting DeviceExpert in Vista is available for download in the following url: http://bonitas.adventnet.com/deviceexpert/26Mar2007/script.zip (1) Unzip the above script.zip under <DeviceExpert_Install_Directory>. (By default, the installation folder is C:\AdventNet\DeviceExpert) (2) Make sure the following files get overwritten while applying the fix: * scripts/run.bat
Problems backing up Cisco-Switch Configs
Hello I'm currently evaluating DeviceExpert. It works fine for all of our Cisco Routers. I can however not get the config-backup feature to work with our Cisco switches. When I backup, I see these Messages in the serverout0.txt: [15:50:12:630]|[03-14-2007]|[SYSOUT]|[INFO]|[324]|: InterruptedIOException Occurred (Retry Count: 1), Retransmitting the ACK Packet| [15:50:12:630]|[03-14-2007]|[SYSOUT]|[INFO]|[324]|: java.lang.IllegalArgumentException: Port out of range:-1| [15:50:12:631]|[03-14-2007]|[SYSOUT]|[INFO]|[324]|:
API into DeviceExpert
Hello Is there a way to add devices to DeviceExpert from a script/workflow management system? Either through a SOAP/XML interface or a shell interface? Thank you and kind regards Flavio Curti
Custom Fields
Hello Does Device Expert support adding custom fields to a device? Like a inventory number or the like, so it's viewable on the General Properties tab. Thank you and kind regards Flavio Curti
Daylight savings time changes
Is DeviceExpert compliant with the DST changes coming up on 3-11-2007 for US customers? I had to patch my OpManager java so is there something I need to do with DeviceExpert?
Changes in Daylight Savings, its impact on DeviceExpert
Hi, Changes in Daylight Savings for 2007 scheduled to take effect on 3-11-2007 will affect Java applications in the United States. This would lead to improper reporting of applications, which handles time-related data. Updated Java Runtime Environments contain updated rules to report appropriate time with respect to the time zone. Users in the USA who are running DeviceExpert build number 4210 or lesser are requested to patch the JRE. Please follow the instructions below to patch the JRE. Prerequisite
MIB Creation
Hey All I want to create MIB file for my own device. Can you tell me any tool available for this or Any direction from where I can start making it from scratch.... Thanks
Conecting through NAT
Good day. I'm tring to backup Cisco 7200 series through NAT (Cisco PIX), but can't do it. In debag level log , i can see the following ############################## [15:47:00:235]|[05-24-2006]|[com.adventnet.nms.config.executor.internal.NEConfigurationTask]|[FINEST]|[23]|: TaskExecutionID: 103 Target: 212.xxx.xx.xx Configuration of NE Starts| [15:47:00:235]|[05-24-2006]|[com.adventnet.nms.config.executor.internal.NEConfigurationTask]|[SEVERE]|[23]|: TaskExecutionID: 103 Target: 352 Customized Record
Change file name of switch being backed up by tftp server
I am doing a eval and we need to save the backup file by a specifiy name. Is it possible to change the name of the file being backed up by tftp. I want to use the hostname or IP as the file name. I determined how to use a different tftp server, but I can not figure out how to change the file name. Thanks In Advance.
SDK ?
Hi all, A simple question : Is there a SDK for DeviceExpert ? Thanks !
DeviceExpert Build 4210 Available!
Hi, Thanks for your continued interest in ManageEngine DeviceExpert. We are glad to announce the availability of DeviceExpert Build 4210. Highlights of the release: Enhanced Device Discovery More options for viewing config diff Syslog-based config change detection support for most of the models Support for more than 280 device models Support for 15 Vendors And much more... For more information, visit Release Notes. Download Full 4210 Build http://manageengine.adventnet.com/products/device-expert/download.html
Comparing Config to Template / Rules
Getting started with an evaluation of this tool. I want to be able to compare a running configuration to a "standard" configuration template. How do I accomplish this?
reason for syslog desable in device Expert
hi all, when I configured with this in order to get notifications from routers some are works.some are not warking.but both routers have same configuratins with same version pls looking in this SDSP
Custom Ports
I am new to Device Expert and just evaluating it right now to see if it is a good fit. One question I had is if this product has the option to configure a custom port for telnet or SSH? I do not see it in the GUI, but was hoping there was another way to do it?
DeviceExpert 4.2 (Build 4200) Released!
Hi, Thanks for your continued interest in ManageEngine DeviceExpert. We are glad to announce the availability of DeviceExpert 4.2 (Build 4200). Highlights of the release: * Support for more than 275 device models * Support for 15 Vendors * Config Change Management Policies * More Discovery Options * Enhanced Reports And much more... For more information, visit Release Notes. Download Full 4200 Build: http://manageengine.adventnet.com/products/device-expert/download.html Upgradepack for existing 4100/4101
Request:
Can you give deviceexpert the ability to schedule device reboots?
Dell PowerConnect switches
Are there any plans to get Dell's PowerConnect switches working with this product? The switches I'm looking to work with are PowerConnect 3324 PowerConnect 3348 PowerConnect 3424 PowerConnect 3448 PowerConnect 6024 PowerConnect 6024F Thank you.
Multilanguage support ?
Dear Sir, Do you have plans for supporting multilanguage? I'd like to suggest my customers for this programs. But, I'd like to know the supporting plan for multilanguage. Looking foraward to good news. Best regads, Simon Kang
HP Procurve 8000m bandwidth speed
I'm creating a test environment and need to decrease the bandwidth on one of my ports to 128k. Anyone have an idea of what commands the HP Procurve 8000m uses to accomplish this? OR have an alternate way of accomplishing this?
Unable to Ping Device
Some network devices are behind firewall which do not allow pings. How can I disable the ping test when attempting to set credentials?
Device Expert - Multihomed server - How to select IP for TFT
I am evaluationg Device Expert, and the server is multihomed (one nic for accessing the server and another nic for the server to access the routers). Backup is failing because device expert is sending the wrong ip address for the tftp download of configuration. How does one specifiy which nic to work with?
SQL Server setup on same box as software
Can you provide a setup pprocedure to have an SQL server configured on the same box as the deviceexpert software? Please email it to me at tom.logan@pwgsc.gc.ca
Cisco ACL changes only
I only want to update the access-list section of a config. Do I have to "download" the entire config the device or only the whole acl section? Also, if I download the entire config is it performing a "copy running-config tftp" - and if so does that means that it is resetting all my interfaces with each reload? Correct?
Syslog and tftp port
Hi, All. By the way, is it possible to change syslog and tftp ports through DE config files like we do it with e.g. MySQL port? With respect and kind regards, Ilya Serov.
Importing or discovering devices
Hi We manage a large network of about 1600 Cisco routers and switches. I have been evaluating Device Expert and i would like to know how i can import or discover 1600 devices. Ive looked at the help for the import option but unfortunately we do not have the details of the IOS version and model number of all our devices. We basically just have a hosts file with the hostname and IP address of 1600 devices. This is why we are looking at Device Expert so that we can keep an inventory of our devices.
Weird Login Problem
Hello everyone, I'm testing out Device Expert to see if it's something we can use. I have it installed on a workstation and I can access the web based login through http://localhost:6060, and it works fine. However, if I try to access it remotely, like I do opmanager and service desk, I get a weird page with squares on it. I've attached a screenshot below. Does anyone have any ideas? Thanks for your help. Eric
Unable to backup HP Procurve Switch 4000m and 8000m
Dear, I'm trying to backup configs for serveral network devices on my network. I've got some Switches from Cisco, HP and D-Link. Nearly all switches are able to be backuped, only the HP Procurve Switch 4000m and 8000m aren't. When I set the credentials for these two switches and update them, DeviceExpert starts to backup the configs, but never ends oder breaks up. Even an error-message is not displayed! It just continues backing up the 4000m and 8000m on and on... I think it has something to do with
Request: Inventory Reporting
Hi, Would it be possible to get a report that generates a list of all of the devices including the following: Type Vendor Series / Model OS Type / Version Serial Number Even if someone could give me the SQL to run as a custom report to return this it would be good.
Cisco AS5400 support
Hi, When can we expect support for Cisco AS5400?
Cisco and SSH
Hi, I�d like to export Cisco configurations using SSH. Do you plan to implement this feature and if yes when can we expect it?
Backup device outside local network
I am trying to backup routers on the perimeter of our network that do not have access to the local network. The backup command tries to send the backup file to the local address of the DeviceExpert server and it eventually times out. Is there a way to change the address that the backup file is sent to for certain devices? I am using Telnet-TFPT Thank you, Jamie Jensen
Support For Additional Switches
Hi, i am present evaluating Device expert, quiet a good product, can you advise , are you planning in your roadmap to support Nortel Switches, we currently have 20x 8600 Passports and about 50x Baystacks 5520's. This would be very helpful. regards, Oscar
Backup config trough ssh-tftp
We just trying to setup ssh, but without any success, is it really work or just not yes implemented ? In our config we have cisco router (3745).
Enterasys
Any chance to manage Enterasys switches ? M A T R I X N 7 P L A T I N U M Command Line Interface Enterasys Networks, Inc. 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com (c) Copyright Enterasys Networks, Inc. 2005 Chassis Serial Number: 0001f4960dad Chassis Firmware Revision: 05.13.04
Error in updating credential values
I have that message when using the credential of a profile or adding a new. the switch is : WS-C4006 Software, Version NmpSW: 6.3(5) Copyright (c) 1995-2002 by Cisco Systems, Inc. NMP S/W compiled on Feb 7 2002, 21:00:39 GSP S/W compiled on Feb 07 2002, 18:11:42 System Bootstrap Version: 5.4(1) Hardware Version: 3.2 Model: WS-C4006 Serial #: FOX0503018K Mod Port Model Serial # Versions --- ---- ---------- -------------------- --------------------------------- 1 2 WS-X4013 JAE051101QH Hw : 3.2 Gsp:
Next Page