Interface Pie Chart
I have created an interface group by combining several interfaces. Is there any way I can get the volume data to display for the top interfaces (in the interface group) in a pie chart (similar to the Interface Group Top Destination pie chart)?
Measure Application Bandwidth Traffic from WAN/LAN
Hello, Is it possible to monitor Web/service traffic on specific server/IP? What I want to accomplish are the followings; 1. Measure the LAN bandwidth on specific server/application that hosted on a server from particular vLAN. 2. Measure the WAN bandwidth on specific server/application from external to internal to see how many hits this application is getting. I do have license for applications, and netflow is configured on Cisco ASA 5525, but don’t know how this can be accomplished.
Netflow Analyzer on Windows will no longer start.
We have been running Netflow for several years and recently completed a number of upgrades, most recently to v.9860. I have run the LobZipUtil.bat and can upload for review to assist with troubleshooting. thanks, Paul Bubendorf
HELP ME DETERMINE A CLEAR LINK BETWEEN BUSINESS AND RELIGION.
Hei deer friends! In today's society, many think or believe that in business it does int matter the treatment or vices you may induce or cause someone as well as you end up making profit! It does not matter even if the person is left suffering as long as he does not get hold of you! Amazingly, it seems the religious leaders have followed on this track through strange rules other than the identical ones clearly written in religious books! Can we then be able to detect the right and true religion?
After 9500 to 9600 update Netflow wont start
Windows 2008 64 bit. I should have never tried to update this.... Update went fine 100% , tried to start service wont work (in services.msc). Restarted wont work , Stopped Netflow service, tried to to run run.bat says 8080 is busy. Killed mysql , java , says the same Tried to run different port doesnt work either ... Its like a zombie process ( used tcpview.exe, theres no process associeted with it)
Routers re-add with different interface after router reboot
Hi, I have an issue that some routers re-add in netflow analyzer with different interface after routers reboot. Kindly advice on this matter. BR
Is NetFlow can detect broadcas?
Hi, I'm new with NetFlow, and I just wonder if Netflow can detect broadcast traffic and tell me in good and simple report "Hey, this is Device X and it's making a lot of broadcast / Device X making a lot broadcast-garbage"? Thanks.
Unable to config Google Maps
Hi, I'm unable to set Google Maps. I'm using this link as reference: http://www.manageengine.com/products/netflow/help/getting-started/google-map-view.html On step 1 when I click on "click here" link, there is a pop-up a new window saying me "Assign Locations For Routers" but there is no map. 've not been asked to Sign up for the Google Maps API. The Netflow Server has access to internet and I'm using version 9.7 Build Number 9700, license Essential. Thanks in advanced. Ronald
Configure Netflow
Hi I want to understand whats the different between set up Netflow using the below methods and which the best recommended procedure for setting up Netflow. 1. On the Interface router-2621(config)#interface FastEthernet 0/1 router-2621(config-if)#ip route-cache flow On Router router-2621(config)#ip flow-export destination 196.0.0.1 9996 router-2621(config)#ip flow-export source FastEthernet 0/1 router-2621(config)#ip flow-export version 5 router-2621(config)#ip flow-cache timeout active 1 router-2621(config)#ip
Problem starting netflow server
Hi there Wanted to trial netflow plugin however I'm not able to start the server: ----------------------------------------------------------------------------------- Starting Server from location: C:\Program Files (x86)\ManageEngine\OpManager\Net Flow ERROR CODE : 523 Invalid License File Please contact AdventNet, Inc. 5645 Gibraltar Drive Pleasanton, CA 94588 USA Phone: +1-925-924-9500 Fax : +1-925-924-9600 Email : info@adventnet.com WebSite : http://www.adventnet.com ERROR CODE : 469 Invalid License
Configuration Backup From Windows 9860 to Linux 9860
Hi, I am using Netflow 9860 32 Bit version and i need to migrate APPLICATION MAPPING, IP GROUPS and SCHEDULED Reports on newly installed Linux 64 Bit Netflow analyzer of same build. New and Old Installation details are in below. Old Window Machine : 64 Bits Netflow : 32 Bits Build : 9860 New Linux Machine : 64 Bits Netflow : 64 Bits Build 9860 Kindly guide on the same. BR
Netflow and VMware
Does anyone know how to sniff a particular vm's network using Netflow? Thanks, Justin Evans
NFA:Best Practice Configuration Router With Cisco GETVPN and WAAS
Hi, my company use NFA for monitoring traffic on branch. There's Cisco GETVPN encryption and WAAS to optimize and secure the connection over WAN. I'm using NFA 9.8.6 Profesional Plus and router 2951 using IOS version15.2(4)M3. What is the best practice configuration on the router so NFA can fully monitoring traffic and all feature on 9.8.6 Profesional Plus working ? Thanks
Waas Central Manager
We just applied the update for NetFlow of 9.5 9500. I am trying to configure the WAAS option. We have a license for Professional - 100 Interfaces. When I go to Admin -> WAAS settings -> CM Server settings I input my data. We are running WAAS-CM 4.1.3. I never see the CM show up as a device to be managed. I have also opened a support case, but thought this might have been a problem for others.
Cisco WAAS in NFA setting
Hi, i follow the instruction activating Cisco WAAS on NFA but still not work. https://blogs.manageengine.com/product-blog/netflowanalyzer/2011/07/05/cisco-waas-reporting-in-netflow-analyzer-part-1.html There's no error or warning, just nothing. Is there something missing ? I'm using CM WAAS 5.3 and NFA 9.8.6 Professional Plus. Thanks in advance.
I'm not able to see my reports.
I've using netflow analyzer for a couple weeks, in order to verify how it works and if it would bring any benefits to our company, indeed this is an excellent software. Now I need to generate some reports, regarding the data I collected during the trial period, but I'm unable to do it, when I click on "reports" I got some kind of unformatted screen that doesn't show all the reports I created and also doesn't show anything about the traffic. Is there someway I can view the reports I created regarding
Status:Link up. No flows received for last 10 mins
Hi, i'm trying configure my router Cisco with Flexible Netflow with NBAR. I can see statistics in flow export on router Cisco but no flow in NA-server. I'm using NA 9.8.6 Profesional Plus and router 2951 using IOS version15.2(4)M3. I restart NA service but not solved. I unmanaged and managed interface still doesn't work. Can you helped me why no flow in NA-server ? Here's the capture. Flow Exporter FNFnbarEXP: Packet send statistics (last cleared 00:38:18 ago): Successfully sent: 654
Application mapping
I was wandering how other users of NetFlow Analyzer have configured application mapping and keep current IP Groups updated (i.e. IP addresses of ESPN or Facebook or YouTube, etc.) I understand this is probably a pretty vague question but if anyone has best practices they could share it would be greatly appreciated.
Netflow Analyzer Backup and Restoration
Hi, I am using 32 Bit Netflow Analyzer build 9860. Kindly guide me about the backup and restoration procedure for the same. BR
Netflow Build 9.8.6 ASA unaccounted traffic of Last One Hour
Hi, I have upgraded the Netflow Analyzer from build 8000 to 9860 by providing steps. Netflow showing the correct data / traffic of routers (last hour) but showing UNACCOUNTED traffic of Cisco ASA of last hour but showing traffic of last 6 hours. Below are the links of the same. http://bonitas.zohocorp.com/customer_uploads/2014_7_10_3_10_44_Netflow_9.8.6_ASA_Hourly_Traffic_Graph.jpg http://bonitas.zohocorp.com/customer_uploads/2014_7_10_3_14_51_Netflow_9.8.6_ASA_Hourly_Applications_Details.jpg Kindly
no traffic from vlan
Hi all, I am not getting traffic from VLAN interfaces. I ve configured Netflow on my 6509 but if i select VLAN from New interface i still see 0% of traffic. Thanks Marco
QoS Packet Starvation - Huawei NE40E router
Suppose I use NE40E-X3 router and I implement PQ scheduling for EF VoIP flow and WFQ scheduling for AF flows. According the documentation, EF flow will be scheduled first, but it is good to limit its bandwidth in order to avoid packets starvation of lower priority flows, such as AF. Checking HedEx and for NE40E-X3, I can only use the command using shaping, like this interface gigabitethernet6/0/6 port-queue ef pq shaping 100 outbound By using this command EF flow will be limit, but also will
OTT Services
Dear All, I'm using ME Netflow Analyzer, i want monitor OTT traffic (Viber, Whatsapp, Line,...). What and Where will i have to declare in the NFA?
Netflow on Cisco Wireless LAN Controller 2504 with Cisco AVC Feature
HI, I would like to know if Netflow Analyzer 9900 which now supports Cisco AVC will be able to process flows from Cisco Wireless LAN Controller 2504 which uses Cisco AVC feature. Thanks and Regards Thierry
Can get NetFlow Analyser Workign on ubuntu 12.04x32
Hello, I could sucessfully run NetFlow Analyser on a VM with ubuntu 12.04x64, but when I tried to run it on the ubuntu 12.04x32 on a real pc, I'm getting the following error: anageEngine/NetFlow/pgsql/bin/pg_ctl -D /opt/ManageEngine/NetFlow/pgsql/data -o "-p13310" start ] | [13:44:05:650]|[06-27-2014]|[com.adventnet.db.adapter.postgres.DefaultPostgresDBInitializer]|[INFO]|[10]: is DB registered as a service ::: false| [13:44:05:659]|[06-27-2014]|[pglog]|[INFO]|[11]: stdin: is not a tty| [13:44:05:661]|[06-27-2014]|[pglog]|[INFO]|[11]:
Netflow from Vmware ESX 5.5 server error
We setup our Vmware ESX servers to send Netflow packets to our ManageEngine server. We receive this error message. "V9 flows of unknown template are received from". Is there a way to set the system up to receive these packets?
How to create IPv6 IP groups?
Hi. I'm trying to add an IPv6 network to my IP groups. Unfortunately adding this IP network (example): 2001:0db8:85a3:: and 64 as the netmask is accepted, a message appears saying "net is IP6", but the group then shows: IP Address (Netmask) All Port (Protocol) All DSCP All Associated Interfaces: All Interfaces. Is there any trick to get IPv6 networks added to my IP groups? Or is it still not supported? Thanks.
Netflow Analyzer on Ubuntu 14.04 LTS issues
I've installed the analyzer on my Ubuntu box today, and everything appears to be working, except the web page is telling me "No device is currently exporting NetFlow / sFlow packets to NetFlow Analyzer". When doing a tcpdump on it, I'm seeing the traffic from my ASA: 11:47:55.674363 IP 192.168.5.254.43503 > Athlon64.9996: UDP, length 1388 11:47:55.675154 IP 192.168.5.254.43503 > Athlon64.9996: UDP, length 1212 11:48:56.884308 IP 192.168.5.254.43503 > Athlon64.9996: UDP, length 1388 11:48:56.884550
Integrate NFA with external MySql server
Hello. Do you want to use NFA with you already installed MySQL server? Make this steps: 1. Before first run NFA modify next files: ./server/default/conf/nms-service.xml: --- nms-service.xml.orig 2005-02-03 17:15:13.000000000 +0500 +++ nms-service.xml 2005-04-21 14:20:34.000000000 +0600 @@ -16,7 +16,7 @@ </mbean> <mbean code="com.adventnet.persistence.service.PersistenceService" name="user:service=PersistenceService"> <attribute name="JndiName">persistence</attribute> - <attribute name="StartDBServer">true</attribute>
Cisco ASA Inteface
Hello Support, We re-evaluating NF9, and we're currently having a problem getting the interfaces to appear with their real names in Cisco ASA 5510 The names appear as IfIndex2, IfIndex65535, IfIndex8 I have unmanaged and updated SNMP, but no luck Can you help? Regards Carlton
Netflow Alarm when trafic is below the threshold?
Hi, It is possible to set an alarm when a flow for an ip group goes over an threshlod but I want to know if It is possible to set an alarm when a flow goes below an threshlod? thank you in advance.
Netflow Analyzer Plugin was successfully running and then quit working
So we had Netflow correctly setup and analyzing data. Last Friday it just quit working. No explanation of why. I've checked the switch and it's still sending traffic to our server via 6343. I've verified the incoming traffic with Microsoft Network Analyzer on the server. If I disable OpManager, InMon Sflow Trend reports the data. I've restarted the server multiple times and checked the admin settings in OpManager web console. Error Message: ------ No device is currently exporting NetFlow / sFlow
using MSSQL instead Mysql database..
Hi, I wanted to know whether can we use MS SQl 2000 database instead of using MYSQL to manage it better. we faces so many challanges while working with MY SQL like Database size growns , take more RAM , and CPU utilization. Please suggest if we can.
Unaccounted Traffic Netflow 9
I installed the trial of Netflow Analyzer to see if it will work for our network, and it appeared to be working correctly, until about a half hour after it was installed. Much of the traffic that was showing up properly disappeared under the specific IP Destinations, and showed up under "unaccounted" traffic. This was all in less than an hour, and I was still using the Last hour view. All of the other views show the same thing. I get that traffic will show up under unaccounted when it first comes
Netflow analyzer not showing conversation history
Hi Everyone, Yesterday opmanager server disk space become zero bytes. initially we have moved some files to other location but it has not created much space. later we have increased disk space from 100GB to 150GB in Hyper-v. after this we have copied all the file which was relocated. Now it is working fine but conversion is not coming for any device --> ip group
Netfllow Integration with ACS
Hi, I have been using Netflow analyzer for more then 3 weeks and few things i want to know before we get this product: 1) Do u have any plans of showing packet rates i.e. packets /sec ? which is very important to trace any viruses or irregularies. 2) Is it possible to integrate Netflow analyzer with Cisco Secure ACS (version 3.3) ? Please let me know this urgently, will be waiting for your reply. Regards, Ali
Netflow Analyzer Service stops after few seconds
Hi, I'm new to this whole topic of Linux and Netflow, so I must apologize in advance for any stupid questions. My company has Netflow Analyzer running and I was given the task to implement Firewalls and Routers to be monitored correctly. When I touched it the first time, it was already installed and running, but with some issues (only 1 FW monitored, different SNMP settings etc. needed to be set,...). I came to the problem, that our vpn-context wasn't monitored properly and somewhere I found the
Netflow Analyzer 9100 not upgrade to 9500
Hi, I have netflow analyzer 9.1 build 9100 64 Bit and i am trying to upgrade to build 9500 but unable to update on build 9500 as upgrade window is continue to running and not going to complete. Below is the picture link. http://www.4shared.com/photo/iNHcyXZnce/Netflow_build_9100_Not_upgrade.html? Kindly guide. BR
End of Support for NetFlow Analyzer versions 6.x to 8.x
Dear Users, We are announcing End of Support for NetFlow Analyzer versions 6.x to 8.x on August 31st, 2014. We request our customers in these versions to upgrade to the latest supported versions as soon as possible. Details of the announcement can be seen here. http://www.manageengine.com/products/netflow/eos.html Thanks Gowrisankar.
Change database name
Hello We have OpManager build 11300 and Netflow plugin. All the time the Nteflow installer creates the database named 'netflow'. Our database administrator has standard for the database names. Is it possible to change netflow for bda_netflow? Regards Orlando
Next Page