SNMP monitoring of Dell Switch
I used the mrtg to monitor the Dell switch , it is easy and working fine. But i am not understanding how to monitor my switch using Application Manager. How to find which oid and how to add it in appmanager. Regards Farooq
modem to send sms
We would like to send sms.Is it possible to use a usb modem instead of those that are shown in the help page ? The modem is usb modem OPtion Globesurfer iCon with chipset Qualcomm 6275 using hsdpa network. Regards Laurent Dewandel
Monitor different subnet thru proxy
We have a second network that is only available through a proxy machine. basically you have to ssh to an outside address then you can ssh to the nat private addresses. Is there any way to get Linux monitoring to work this way?
Manually stopping/starting the default MySQL server
Last week I installed a default install of Applications Manager for evaluation and it worked great. Sometime over the weekend the application stopped running. I tried to restart but got an error that MySQL was not running. I found MySQL under the Applications Manager install directory but could not get it to start. Can someone tell me the recommended way to stop/start the MySQL server that comes with Applications Manager? This is a Red Hat Enterprise Linux Server release 5.1. I tried running mysqld_safe
Monitors Server reports-interval
When I create report for last 24 hours. for instance server CPU the result comming up in interval of 1 hour. 10:00 4% 11:00 3% How can I chsange this interval to 5 minutes in reports? Thanks
Report Table Spaces utilization on Db Oracle
Is it possible to generate an automatic report about table space utilization on DB oracle?
Adding views to Table view
Is there any chance to add the processes I monitor in the table view so I could see that they work directly without cliking on each host?
DB availability
current DB availability reflected from the time is start the DB monitoring, is it possible to reflect in availabilty report the actual uptime since i restart the DB. Will application manager cintinue to gather statistics even if i shutdown the Application Management console? rose
AppManager Service will not start after upgrade
We have just run the ugrade from build 8010 to 8200 and when it came to restarting the service an error pops up (too quick to read) and AppManager goes through the motions of looking like it is starting. Nothing happens after the splash screen disappears and no icon in the system tray is shown to show it is running and when I check the services appmanager is not running. I've checked the std err log and it gives me the following; 3 Apr 2008 10:20:09:104 ~~~~~~~~~~~~~~~ Logging started ~~~~~~~~~~~~~~~~
Jboss monitoring on Stateless beans - Issues
I have an issue with the this tool. Presently we are evaluating this tool for monitoring the Jboss 4.0.x. The EJB statistics shows the creation of SLSbs as 10,000. If this is relating to the number of ejbCreate invoked on the bean, what I would like to understand is that why the count of removed is zero. Does this mean none of these SLSBs are removed from the pool or there's more to this.? You earliest reply would help us in making an early decision to buy this tool. Thanks and regards.
No disk IO stats
Hi, I am evaluating this prduct purely to see it's ability to monitor disk IO ,ironically this is the only metric it does not display. How can I do this ? As well as when I try to add a new monitor it tells me SNMP is not responding , when I can walk the MIB from other machines. Can you help ? Regards, Stephen Stephen Willemse
Application hangs while editing the Request Details
Hi, I have been using the demo version of Service Desk plus for a few days now, and I have encountered a rather annoying problem with the edit fields on the Request page. I have created a test administrator and user account, giving the administrator full privileges. Upon the submission of a dummy request, the administrator closes it and tries to reopen it as per the Administrator manual. Except, upon clicking the edit button for the Request Details field, the application freezes and does not commit
Application Manager editing hosts names
Hi everyone, I am new in using Application Manager and I have a trouble.After pressing on Add New monitor button I have to add an IP address which I want to monitor and I do so...but then I when I look at the Monitored groupes as a Icon view I see the machine with its IP address. Is there any chance to give the machine name so that I would see the name of the machine not the IP address. For example: Adding a machine with IP address 192.168.48.5 I want to see a name which I set for example "Mimi".Can
about monitor Weblogic 8.1+SP5
The version of Application Manager is Professional Edition. i had modified 2 parameters in my startWeblogic.cmd according to User GUIDE document. when i restart my Weblogic, a message had be displayed: disableMBeanAuthorization is not a recognized attribute...... then i can add a new weblogic monitor in Application Manager 7, but i can not see the JDBCConnectionPool and EJBRuntime monitors. i had ask this question to the supporter of Application Manager in China, but they tell me there are same problems
text
i have bought freesms software but it do not working. what can i do now? saikat
alerts do not trigger
I've created alerts(send mail + launch prog). When I test them by clicking on "launch" button in app manager, all goes very well. But when I affect them to a monitor (disponibility or health) and when the monitor goes red (unavailable), these action are not triggered. I can't figure out why they aren't triggered. Is there a way to fix that? Do I make something wrong or forget something? (Win XP sp2, java 1.6.0_03) Rémy Baud
SNMP CPU Utilization in multi CPU servers.
I am currently evaluating Application Manager and am extremely impressed by this software. I just have one question/problem. I am monitoring Quad CPU machines and I did some research and it seems that SNMP reports the CPU utilization by summing the cpu usage and giving a "total" percentage. So for 4 CPUs this percentage would be (# of CPU's * 100) or for 4 CPUs 400%. So if 50% of each CPU is being used then that would be 200/400. The gauge on the performace monitor of a Linux machine only goes to
Informix database
Is possible monitoring also IBM Informix server? Petr Pomykacek
Failed script alert
Hi All, We have several scripts running in remote server for AppsManager monitoring. Sometimes those script failed to run with exit code 1 due error or unhandled error scenario. Is there a way for AppsManager to trigger an alert for those failed scripts? Thanks
Unable to change the server ID
Hi Guys I have installed Applications manager 8.2 enterprise edition and I have issues with adding the managed servers. Both Managed servers registered a server ID of 1 and I there for cannot both of them to the admin server. This is a big issue and I need to resolve this ASAP. On top of this the two managed servers were installed on an evaluation edition and I have added one of them to the admin server. The software is licensed but on the managed server it says that I have 8 days and the trial will
Problem in creating a new monitor for Websphere Application
Could not connect to the authenticated Websphere Server.Kindly check whether the username/password provided are correct. On selecting Global Security is enabled and providing User Name & passwords, The error message shown is as below:- The PerfServletApp isnot installed or not started. Please advice on the same issue as early as possible as i am facing severe timelines. Deepak Saini
Email alerts for managed servers (Enterprise)
We have five managed servers running in Enterprise edition, and I need to configure email alerting should one of these serves fail. I've read the manual and each managed server has the option set for 'E-mail me when status of this server is down' in the managed server Edit properties dialog. This in turn uses the Admin Email settings, BUT that only allows you to specify a mail server, not a recipient for the email. How can I determine who gets the alert? Elsewhere in App Manager there is a windows
Email server monitoring - response time
As I found POP3 monitoring works with different threshold times than what can be configured through Threshold Profile. Its critical response time is 2000ms and I can not change it. Beyond this value AppManager declares that the mail server is not available, therefore the response time is not displayed. My goal is to measure the round trip time of a message sent through the mail server to a mail server outside of the office and forwarded back to the office. Now the system virtually works fine, however,
Email alerts for managed servers (Enterprise)
We have five managed servers running in Enterprise edition, and I need to configure email alerting should one of these serves fail. I've read the manual and each managed server has the option set for 'E-mail me when status of this server is down' in the managed server Edit properties dialog. This in turn uses the Admin Email settings, BUT that only allows you to specify a mail server, not a recipient for the email. How can I determine who gets the alert? Elsewhere in App Manager there is a windows
MSSQL Monitor shows wrong job run date
Job run date column of MSSQL Monitor is wrong (Build Number 8200 Service Pack 2.0) Cahit Can
Summary Reporting by Groups
Another Reporting question: AM doesn't appear to allow for doing summary reports by groups of servers (only individual servers). It's not an option in the reporting tab and monitor group greys out when you select Summary Reports. We really need to do this kind of reporting. Management doesn't care for 50 individual pdf reports. Is there a workaround we can use - some sort of script or setting?? Is this capability at least forthcoming in a future release?
AppManager Monitoring services
Hello, I am evaluating AppManager 8. We have an application that answers a telnet on a specific port. entering *status will retrieve some data I would like the App Manager to retrieve and show in as graph / status manner. Following is an output example: >Status is UP Jobs waiting: 0 Free Memory: 75,108 K Total Memory: 119,720 K Max Memory: 260,160 K I would like this data to be shown on AppManager. How can I do this? Yossi Shteingart
Sub Group Reporting
We are utilizing the subgroups to organize our server monitoring, however, when we try to run reports it only lists the top level groups. Is there a way to run reports on sub groups? We're running AM 8.2
Wrong statistics from Weblogic 9.2
There is a mismatch between the statsitcs shown in Application Manager compared to weblogic console. For example: AM shows 200 connection, WLS console shows 15; AM shows 5 threads (100% utilization), WLS shows 17 max threads, 1 currently in use. Gil Maletski
problem with SLA email escalation
after enabling SLA email escalation for Business Applications I am receiving SLA violation emails that do not include any info. i.e. it will say "The following Business Applications violate the SLA" but then there is nothing after that statement. Do I need to add a variable to the email to see that and if so what would it be? Thanks
URL is not shown as down when it is down
Hi, I am doing url monitoring.When url is down it doesnot send any mail to concern person plz help me
problems with Java Runtime Environment Monitor
Hi, i create a new monitor to my jvm, and have the follow problem: Service is not Running. Root Cause: Service port 1099 not accessible from [myhost] Having trouble adding Monitors? To monitor a Java Runtime Environment the following java runtime options needs to be added to your application -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=1099 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false Replace 1099 with the actual port number of the
Register Windows Server Error
Hello I´m evaluating the software, and when I want to register a Microsoft Windows 2003 Server, the software send this error: Error # Class not registered I check the user and pass and that´s ok. Juan José Puga Germany
Register Windows Server Error
When I try to register a Windows NT Server, I got "ERROR # Class not registered", the Error and I can´t make a connection with the server. What can I do? Juan José Puga Germany
App Manager wrong System Date
My Windows Server has 9:49 AM as the current time, but our app Manager shows 2:48 P.M. !! where is getting this date from? This is a fresh installation of your product. Please help
SQLServer statistics
hi all, I would like to see sqlServer statistics per each instance on the server. In other words, I have 3 different db instances on a server and need to see lock/recompilation etc. statistics for each db instance seperately. Is there a way of doing it? thanks Dincer Salih Kurnaz
Migration
Hi, How can I migrate all settings and all nodes (which monitoring) from old server to a new server Regards Carlos Espinosa
AUTOMATIC REPORTS IN CSV FORMAT
Hi. I'd like to know if is it possible to obtain an automatic report in csv format. The only way i've found to obtain this kind of report is manually. Thanks in advance
monitoring linux through ssh
I was wondering if anyone was successful in getting this to work for vmware esx host. I had no issues with using ssh for monitoring a desktop linux install (CentOS 5) but it would fail when trying to monitor vmware esx. AppManage reported that there was no ssh daemon running. I am able to login to both servers using the puTTY ssh client but AppManage would only work with the CentOS server. I'm guessing its an SSH config issue but both configs are nearly identical so if anyone can identify what i
MAS_SQL folder on the App Manager Admin server v7
I've recently inherited looking after our App Manager solution so it's all new to me. The v7 Build 7200 SP2 Admin server is running under Windows 2003 server OS. I'm ploughing through the manuals but I can't see where I can control the disk space used within the MAS_SQL folder? It's generating approx 2.46 Gb each day but I can't find a way to purge older files. They appear to be just MYSQL transaction logs so I don't see why I would need to keep them for long. Any help would be greatly appreciated.
Next Page