Application Manager issue
Hi, We are monitoring an IIS 6.0 server over Local LAN and the application manager response time stats show "0" Milleseconds (ms), can you please explain what is this? why does it show response time of "0" Ms which is not possible ? average response time is around 20 ms. Kindly reply back at earliest. Ali
Is posible monitor a MediaGateway Device like Quintum
Hi I want to monitor a MediaGateway device, like AudioCodes and/or Quintum. I mean, I want to catch SNMP Traps about link connection, AudioCodes or Quintum Alarms and more about that; and send a email notification to the MediaGateway Administrator. Is to do that with ManageEngine Application Manager 8? How can I configure that?
IIS response time issue.
Hi, We are monitoring an IIS 6.0 server over Local LAN and the application manager response time stats show "0" Milleseconds (ms), can you please explain what is this? why does it show response time of "0" Ms which is not possible ? average response time is around 20 ms. Kindly reply back at earliest. Looking forward to positive reponse.
How can I transfer a standalone server to a admin server?
How can I transfer a standalone server to a admin server? Bill Ho
Application monitor mirgrated to other server
We have to change the server for hosting the appliacation manager. Would you please give us a procedure to achieve this goal? Thanks. Mike Wong
Application monitor mirgrated to other server
We have to change the server for hosting the appliacation manager. Would you please give us a procedure to achieve this goal? Thanks. Mike Wong
can't send alert mail
Hi, My manager(version 7) runs well before but this days it could not send out alert mail. Please teach me how to check it. Your quick response will be highly appreciated! I had sent help mail in admin menu of the tool but no one response me yet. carol
"table view" does not show monitors organizedd in
Well, the questions is mainly in the subject: Im trying the product, and setup a couple of groups + "single" monitors. When I switch to Monitors-> "table view" , I only get 3 of them displayed .. one of them IS even contained in a group ... restart did dont help
schedule downtime
Why I schduled a downtime, it still show s system down (red bar) in availiability? Thanks! Bill Ho
Tomcat with LDAP authentication
Hi We have installed applications manager to monitor a tomcat server. In Tomcat we use LDAP realm for authentication. Now what should be the manager user we should give while configuring the monitor. Regards
how tyo create alerts action if someone did not take action
how to create actions: 1.Critical alert goes to sys admin, if he did not get alert, need to send to next person to take actions..and so on, to make sure action been take care off. Dmitri
URL sequence with dynamic URL syntax
Ive read the instruction on how to monitor a URL sequence with dynamic URL's by using the $<parameterid> in the Request parameter field. Unfortunately it is not clear to me to what format I should use. Should I alter the original URL as well? for example the following URL; https://somesite.com/smartsite.html?CaseNr=889&id=75621&WorkflowCode=SOMETHING The above URL was recorded using Recorder. Do I delete the parameters after the '?' in the URL so it looks like: https://somesite.com/smartsite.html?
I have installed apppmanger and do not install it as a servi
What I aumatico AppManager in a console windows to be lifted this every time you switch on the machine? pd: I have installed apppmanger and do not install it as a service and now I want to do
Missing IIS Website Statistics
Application Manager 8.5 For some of our IIS servers the Website Statistics are not appearing, it is just keeps showing a please wait for data collection message. I have tried deleting the IIS monitor but, after reinserting, it still keeps coming back as the same. I have also compared the server setup of two different servers with IIS, one where the Website Statistics works and one where Website Statistics does not work and cannot find any different in how they are setup. Best Regards Stefano Leguti
Server 2008 support?
In the latest App Manager 8.5..is Windows Server 2008 supported? I have the software installed on a 2003 server and I am looking to Monitor a Box that has 2008 on it. Currently, I am on build 8206 and when I add a server, 2000 and 2003 are listed but, not 2008. I was wondering if putting the latest 8.5 would resolve this? I tried to add a 2008 windows monitor anyway, but, I got an error telling me to check the OS and see if RPC is running. Thanks, Daman
Date
The engine is showing the wrong date. (Applications manager) Karina
Having Problems to Add a Monitor.
The problem is that im trying to add a monitor and i always get this Error: "Kindly check whether the RPC Server is running in the System.Also check whether the selected OS Type is correct" I know that the RPC Services and WMI service are running, and that i choose the right OS. Can you help me? Amaury Almonte
Having Problems to Add a Monitor.
The problem is that im trying to add a monitor and i always get this Error: "Kindly check whether the RPC Server is running in the System.Also check whether the selected OS Type is correct" I know that the RPC Services and WMI service are running, and that i choose the right OS. Can you help me? Amaury Almonte
memory leaks in Weblogic
�AppManager monitors memory leaks in Weblogic? How?
scriptmonitor output in table
Hello I'm using dmstool form oracle withscriptmonitor, and want to get my values in a table I defined a table oha_stats with the colums I suspect in my outputfile the shell script I'm running, runs ok when I run it from commanline on unix, but when I do a poll with Applicationsmanager only the table starts and table ends tag appear in the outputfile What am I doing wrong here This is the script to monitor # Dumping OHS Stats to a File echo '<--table opmn_host_statistics starts-->' >>ohs_stat.lst
SQL
Can Appmanager and Opmanager use a true MS SQL database instead of MYSQL? Charles Riggs
Thresholding or checking files by "date modified"
I've got a file check monitor running and it reports the byte size, % change and last date modified. I would like to be able to alert out if the file was not updated from the previous date. We create files and post them for our customers and if they don't pick them up or the process to deliver fails the file could be yesterdays and not a new one. So we want to be able to confirm that the new file is created with out having to manual check the monitor. The other scenario is that we append our file
Application manager issue
Hi, We are monitoring an IIS 6.0 server over Local LAN and the application manager response time stats show "0" Milleseconds (ms), can you please explain what is this? why does it show response time of "0" Ms which is not possible ? average response time is around 20 ms. Kindly reply back at earliest. Ali
User manager and Active Directory integration
Is there any way to integrate User Manager with Active Directory? If not, is this being considered in a future release? I would like to manage roles and access through membership in AD groups.
JVM Monitoring on remote host
Dear All, 1. I'm trying to monitor JVM of remote server which is accessed with local IP 10.51.52.100 via VPN tunnel and the attached error is returned 2. The Applications Manager monitoring has been setup to be accessed via port 6699 correctly -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=6699 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false 3.Port 6699 is accessible via telnet and therefore it�s allowed and no restrictions in place on
Configuring Dependencies
Hi, I'm using the trial version of AM. I followed instructions in Chapter 7.8 "Configuring Dependencies" to delete the critical health status on a monitor when a specific dependency is critical. The doc says : "4 - Choose Health or Availability from the combo box. The dependent attributes will be shown in the list box under dependencies." My issue is that I'm not getting the dependent attributes when selecting either Health or Availability. This issue applies whatever is the monitor or monitor group.
Application manager causes errors on monitored servers
Hi, Some of the Windows servers I'm monitoring with Application Manager, have error messages in the event viewer that result from the WMI query. This makes the event viewer log get bigger all the time. Some of our system administrators claim that this also interferes with the application running on the servers. When I unmanaged the monitor, the problem indeed stopped (both the messages stopped appearing on the event viewer, and the crashing of the application stopped. The appearing of these error
Application Manager Build 8501 upgrade issues
After upgrading our Enterprise configuration to build 8501 (1 admin 7 managed) two of our managed servers will not display the page under the "Reports" Tab nor will they display the alert history and pie chart when clicking on the "Availability Pie charts within each monitor group or monitor. All servers used the same patch download to upgrade but only two of the 7 are impacted.
Application Manager 8.5
Hi We have recently installed AppManager 8.5 and have noticed that Tables in Custom monitors now have centralised headings and left justified data columns making the tables hard to read, this was not the case with 8.4. Is this a feature or is there a way we can change the heading so they are left justified? Regards Chris
The meaning of the process detail table
I use app manager to monitor the linux. I see there are Availability and Health fields in the process detail table.What are their meanings and how do you judge(measure) them?If a process has more than 1 instance,will the cpu or the memory field be the sum of these instances?Thanks. Nick
Problem creating an MBean on BEA weblogic 6.1
When i try to creat an MBean action app manager for a server running BEA 6.1 it tells me to check that the server is running. I have done this before with this version of Appmanager and BEA weblogic. I know that the server is running and the Appmanger is displaying other BEA and solaris date on this particular server. Can you please help Kind regards Grant Swift
Questions and requests regarding b7410
Good day, We've updated our Applications Manager servers to b7410 two days ago. So far, so good and thanks for all the new features! We have a few questions and requests that we would like you to answer or comment about. We are running b7410 on Linux CentOS 4.4 and on Linux RedHat ES4. QUESTIONS : 1) From time to time, the "Support>View Monitor Error" page reports: "Authentication failed. Kindly check user and password". This is for server monitors. The user and password are correct. This happens
Incorrect reporting memory in Linux ES4
Hi there, I´ve noticed that memory usage values are wrong. I´ve searched on forums and found that you use a formula to calculate usage based on "free -b" command output. However, this calculation is showing my free memory percentage. I haven´t found any answer to apply and correct this problem. Please let me know how to solve this. Thank You. Iris Silva
Reserved Lunpool monitoring
The command below returns a value of anywhere between 50 - 80.. (its calculating reserved lunpool information. opt/Navisphere/bin/navicli -h 10.1.10.82 reserved -lunpool -list -freesize|grep Unallocated|cut -d ":" -f 2 What can I do to implement this custom script/command into appmanager?
duplicating hosts
Hello, I'm new to appman and I'm trying to figure out if it's possible to duplicate a host. For example, I have a host with all the checks and thresholds in place and have another host which is essentially the same expcept for the hostname. Is it possible to duplicate that host with a different hostname? Alaw Guo
User Administration
Hi. I'm trying to configure AM so as to some users can access only the monitors they are authorized to view. Is there any way to configure AM to make possible to users to administer (not only view) only the groups they are associated to? Thanks in advanced, Manuel
Collected data lost after workstation improper shutdown
Download ManagedEnginee Application Manager 8 to monitor Oracle DB and Sun Solaris. Data collected for few months was not able to view after workstation not proper shutdown. How can we get back the previous collected data? Pls help. :idea:
perf reporting problem
I am getting this error when adding a new snmp monitor. "Host Resource Mib is not in the classpath of Application Manager" It doesn't report the disk usage as well Shailendra
perf reporting problem
I am getting this error when adding a new snmp monitor. "Host Resource Mib is not in the classpath of Application Manager" It doesn't report the disk usage as well Shailendra
Problem Adding JBoss 3.2.x Monitor
When I add a Windows monitor, an Apache monitor is automatically created, but not the JBoss monitor. If I try to manually add a JBoss monitor, the Ping Test and Service Status pass, but Authentication fails with the following message: Unable to connect to Jboss server. Error Message: java.rmi.MarshalledObject java.rmi.MarshalledObject I've tried explictly setting the host name in invoker.sar/META-INF/jboss-service.xml but it made no difference. Our App Manager build is 8200. Help!!
Next Page