Adding MQ monitor
Hi, I'm trying to add an mq monitor but it fails. I've added the required jars : [fexploit@fsappm1 ext]$ ls -l /fsappm1/product/AppManager8/working/jre/lib/ext/*mq* con* -rw-r--r-- 1 fexploit fexploit 17978 Mar 23 21:01 connector.jar -rw-r--r-- 1 fexploit fexploit 416759 Mar 23 21:01 /fsappm1/product/AppManager8/working/jre/lib/ext/com.ibm.mq.jar -rw-r--r-- 1 fexploit fexploit 110575 May 11 2007 /fsappm1/product/AppManager8/working/jre/lib/ext/com.ibm.mq.pcf-6.0.jar 25 Mar 2009 10:08:33:532 java.lang.NoClassDefFoundError:
AIX monitoring / execute command svmon and lsps
Hello I would like to know if it is possible to execute the command svmon and lsps without the root privileges. (sudo ???? or other solution). It's about the statistics of memory utilization in monitoring ... Thanks
Can Not get Monitor to Attach to WebSphere MQ
We have followed the directions about loading the JAR files from the MQ libraries into AppManage and have even fully rebooted the server. Whenever we try and create a WebSphere MQ monitor we still get the error message about the JAR files needing to be loaded. For monitoring the Websphere MQ three jar files are required- com.ibm.mq.jar, com.ibm.mq.pcf-6.0.jar and connector.jar.Please follow the below steps to get these jar files and copy them to the product. 1. Download the supportpac MS0B : WebSphere
MQ health
Hi, I monitor a qmanager with application manager that has a channel voluntary down. I disabled it, cleared the alert, but the health of the monitor is still critical.
reconfigure sms server
how do i go about reconfiguring the sms server when changing the modem
Changed domain - how to update all monitors?
Due to some PDC problems we had to switch to a new domain - now most of our monitors aren't active (since they're referred to by the old domain name). How can I bulk update these?
Upgrading to 8.6 from build 7300
We have upgraded from build 7300 to 8.6, however we get the error in the logfiles below, and cannot see any of our monitors in the monitors tab. 30 Mar 2009 12:09:31:171 java.sql.SQLException: Syntax error or access violation message from server: "You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 'HP-UX','HP-TRU64','HP-UX / Tru64','FreeBSD','OpenBSD','FreeBSD " How can we resolve this issue?
FTP Monitor: exit 1 return code
Dear all, i've created a FTP monitor without any download/upload file. It can connect and login. But the monitor failed because "it" returns exit code 1. The FTP server is alive and i can perform manually the action from the server that is handled the AppManager application What's wrong ? Francois
FTP Monitor: exit 1 return code
dear all, I've created a FTP monitor (provided with rel 8,6). The monitor can connect and authenticate (seen on log files) but the return code is 1 for AppManager. The FTP server is alive and i can connect from the server which handle the AppManager application. What 's wrong ? Kindly Francois
Disk Graph icon in mail
Dear support, Could you please tell us what we have to do to let the Disk Graph Icon appear in mail? No problems with the other ones.. only the disk seems to be having problems. Thanks in advance! Kind regards, Bitz
not able to add activeMQ AS JMX app
hye i m using app manager and now i want to add activeMQ to jmx application of app manger but i can't do it .error is coming is service not runnig .this activeMQ is installed on a linux system .kindly u help me out .as from mant forums i can done to addactiveMQ on my windows. so provide me a good steps for this .remeber i m using ActiveMQ on linux system
Allow operator to schedule downtime?
I don't want to give users admin access to Schedule Downtime and perhaps I have overlooked this option anywhere: How is it possible to allow certain users/operators to add/schedule downtime? Or - how can I create an administrator account with restricted privileges.
not discover monitor
hye i m using app manager from some days but now i find a problem related to the discovery of monitor .i m not discover any of monitor from my application .could give me solution for that .
not able to add monitor JMX
hye this is arun yesterday i m ask u about how to add activemq to manageengine now this problem is coming in front of me...tel what to do
Enable scheduled reports for custom script monitoring
Dear support, is there a possibility to enable scheduled reports for custom script monitoring. Generating reports for this works, but only manually? Please help Regards H. Frederiks
Remote Monitoring
Hi , Wer are user App Mang 6 for some months. Now our collegue from different location wants to see the Monitors that we are definded at our site How can we manage this, so that Users form different location can see the same monitores , without creating new Monitors in Remote location ?
how to add activemq as monitor
hye i m using app manager and now a days i can't discover new monitors and i want to add activemq how could i do this kindly help me out. Arun
Timed Windows Service Thresholds
I have a windows service that "flaps" on a regular basis. I'd only like to see an exception logged if it has been down for longer than 20 minutes. Can I tie a timed threshold to a service? I would like to retain my default polling period of 5 minutes.
Assigh threshold on a monitor
Hi, how can i assign a threshold on the monitor group ? regards, Jatin
Sharing appmanager with two branches
Hi All, I have application manager 8 installed on my server. Currently I have created one monitor group where I can monitor all servers within my network. We have acquired one small company which is not yet locally (our network) networked and users are working through internet. We have 8 servers there & I want to monitor them as well through same appmanager. Is there any way I can connect those servers? What if I connect them through VPN?
Custom PMI - WAS6.1 ND
Hello, From what I understand, to get the best JVM information for AM8, it's recommended to set PMI to ALL in WAS 6.1. I'd rather not do this so as not to adversely affect application performance. Rather, I'd like to utilize the Custom PMI settings that are available. Would you be able to provide a list of the necessary PMI counters that AM8 uses so I could just use those instead of having to enable all PMI settings? For example, maybe I only need the following counters: Enterprise Beans JDBC Connection
URL Monitor: Same relative URL but different domain
As part of the evaluation of AppMan I am looking at URL monitoring where we would like to monitor the health and performance of certain URLs running on Websphere. We have about 20 different Websphere environments where each environment has it's own hostname (i.e. was1.my.com, was2.my.com etc). If I need to monitor a URL was1.my.com/application/mytest.jsp across all servers, I have to create 20 URLs and even worse, if the URL changes, I have to update them one by one. Is there any easier/quicker way
New feature requests and issues
I sent this to the support team, but for the sake of everyone else: We have evaluated the product and found the following issues/recommendations: (Critical) No out of the box support for %tm_act. This is critical for monitoring AIX disks. A separate script is not acceptable as this will then count against new monitors. (Also comparable solutions provide this out of the box). This should not be an issue, as AppMan already calls iostatd, but ignores the tm_act column. (Critical) No reporting or history
Perfmon counters not adding
It seems some perf counters are not adding to machines as expected. Page file counters would not add to a machine so I added another machine for Perfmon and it too is having problems. I have tried many different options and counters are not getting added in. Help...
URL Content Problem
Dear Support (again :), With AppManager we need to monitor +/- 150 urls each 2 mins. Some of the Url's are having date - timestamps on them (eg: 19/03/2009 - 14:28 CET). This changes every +/- hour. We also do not have access to the webserver so the only monitoring we can perform is on the webpage itself. When you take a deeper look into the HTML page, the date is displayed as text in the page... How would you guys suggest we try monitoring this with AppManager? Can we work with variables in the
How to move AppManager from Windows to Linux
How can I take the existing configuration and databases etc from a Windows machine to a Linux machine.
Locations - where are they stored
Where are the locations stored? I don't see South Africa in the list. Also, most of the locations are not applicable to us, how can I delete them in bulk, rather than one-by-one?
Feature request: MQ-monitoring sorting
I just installed the MQ-monitoring and would like to request a feature to sort the columns (ascending / descending): Queue Name, Current Depth, % occupied, Open Input/Output count etc. Some of the MQ-servers I am looking at have in excess of 60-100 queues - it is impossible to just have a quick look at any abnormalities. Perhaps the sorting can be done for other monitors as well.
Does Applications Manager support Postgres
Or is this something that may come about in the future? Thanks!
New Alert for Disk %
How can I create a new alert which will alert via the Disk % opposed to the MB. I want to create a new alert and associate with servers to monitor the Disk % in use. If over 80% to alert. I am in eval mode right now and need a solution ASAP. Thanks
ssl over gmail smtp
i m using app manager and find a problem while executing an actions i.e.- Problem: error message The action Health is down has failed.javax.mail.MessagingException: 530 5.7.0 Must issue a STARTTLS command first. n33sm83167wag.53 . i m using this as evaluation purpose .kindly provide the solution for that .
AppManager running on Linux PPC?
I tried to install AppManager on Suse 9/PPC: Linux csgsystems 2.6.5-7.97-pseries64 #1 SMP Fri Jul 2 14:21:59 UTC 2004 ppc64 ppc64 ppc64 GNU/Linux Starting the installer gives me a "-bash: ./ManageEngine_ApplicationsManager.bin: cannot execute binary file" - I assume AppManager is not supported on the ppc-platform - or?
Cannot See Admin tab-->Performance Polling Option
Hi, Why am I not seeing Performance Polling under the Admin tab. I want to enable scheduled jobs for MSSQL Server but cannot do that because of this. I was first running on 8501 build but have just upgraded to 8602 build. Still cannot see this option. Could someone help? I've attached the screen shot of the admin interface I see. Thanks Hrishi
Oracle session monitor
i'm having issues with trying to configure a Session Count alert in Oracle. the only way to get it to trigger an e-mail is by setting the threshold to 1. the session tab on the monitor does display all the current sessions both active and inactive. i'm not sure if i'm misunderstanding what the Session Count alert is looking at or if there is something i missed in the setup to allow it to read the session count correctly
Como puedo obtener el JNDI Path??
Hola! Estoy evaluando la versión de prueba del Software, necesito monitorear un servidor Glassfish que corre local en mi maquina, pero tengo algunos problemas para especificar al Monitor el JNDIPath del Servidor. Espero puedan ayudarme... Saludos! Pamela Gutierrez Vargas
Script Monitor moving table header column names
I have a script monitor setup that has an output table. I've set the proper String and Numeric attributes, but when I poll the monitor it's not keeping the order on the column headers, and not showing one of my columns (DateTime). Suggestions?
schedule Monthly Summary Report of Disk I/O
Hello. I want to schedule monthly report of Windows Diskqueue and AIX Disk BusyTime like pre-defined CPU Summary report. But there isn't pre-defined Report of these. Please let me know how can I do this. Thank you in advance. _Daeyong
Process Detail CPU(%) not showing
The "Process Detail CPU(%)" is not showing. The Memory is showing. how do I solve this? Thanks
Role/monitor permissions
When changing an already created user from role or monitor group, won't do the changes unless I remove/delete the user from the system and recreated it back again with the role/monitor group desired.
Need more details in JNDI path for glassfish monitoring.
I get the following error when i try with JNDI Path is /jmxrmi Failed to retrieve RMIServer stub: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is: java.io.EOFException] Kindly provide me path of the JNDI for communicating glassfish
Next Page