Downtime from a removed monitor was also removed from the monitor groups assigned
steps: 1 -. We have a monitor group with two monitors. 2 -. The first monitor falls 1h 3 -. The group monitors shows a fall of 1h 4 -. We removed the monitor that is down from the group 5 -. The group monitors still show a fall of 1h We would like that when we remove a monitor from a monitor group, their downtime also was removed from the monitor group.
Ability to select SQL Jobs vs. All
We would like the ability when adding a SQL Monitor in AppManager to be able to select which SQL Jobs are monitored for Health/Availability vs. the default settings of the monitor which pulls in all SQL jobs. This would allow you to only monitor and alarm on business critical jobs versus alarming for jobs that have zero business impact or are only ran infrequently. Thoughts? Thanks, Scott
Lotus Domino Application Server.
Hello Folks, I would like to know if there is any APM template to monitor Domino applications. Thank you.
Historical Reports Indicating Threshold breaches
Hi, Is it possible to include in the reports specially on the graphs a color indicator that the threshold hold has been breach. An example is that if the values go beyond the threshold then the line graphs would change to orange or red (warning and critical) respectively. Or just red color for breaching critical thresholds. Cheers, SNZLuffy
Downtime removal on Enterprise AppManager install.
When are we going to see the capability to get downtime removed via the central console on the enterprise install. It is incredibly bad that we have to go to each poller to do this on a monitor by monitor basis. We have 7k monitors over 6 - 7 pollers and the current setup is pretty bad for downtime removal. The central console should be able to perform configuration and not just view functions. Not impressed with the product at this time.
Bulk "Annotations" function from alarm view
It would be great to get a bulk Annotations function from the alarm view. You have bulk Acknowledge, bulk Assign technician, but no bulk Annotations. use case: Incident causes 10 alarms. We want to bulk select the alarms and Annotate them all with the same Incident #.
Can Appmanager support to monitor Windows China Azure?
Can Appmanager support to monitor Windows China Azure?
$RCAMESSAGE can not be used in XML/HTML
Hi If you want to use the replaceable tag $RCAMESSAGE to build a a e-mail action, the ManageEngine tag has an "end of comment" XML tag in. Ex: Root Cause : Health of SERVERA is critical. Root Cause : 1. servera.dom.com:DiskUtilization-D: --> Free Disk Space(%) 2 < 80 (threshold).2. Error Reporting Service is down3. Windows Audio is down The "-->" is an reserved XML tag, and therefor I can not build a e-mail in XML format !!!
AS/400 Feature Requests
Hello...I would like to request the following features be added to AS/400 monitoring: Ability to setup thresholds and alarms on individual jobs running longer than a certain amount of time, in minutes or seconds. For example, we need to monitor any BATCH job with a status of MSGW longer than 10 minutes or 600 seconds. Ability to set exclusions on parameters within a monitor. For example, for the same alarm proprties listed in the bullet above, we would want to apply that to all jobs except those
Place monitor into maintenance mode with a "single click"
In Applications Manager, it would be nice to be able to manually and immediately place a monitor into maintenance mode (similar to the "downtime scheduler") with a "single click" of a link on the monitor's page. This same link could then take the monitor out of maintenance mode. (This could be done the same way a monitor can be currently "unmanaged" or "managed" with a "single click" of a link on the monitor's page.) Options could be added to this feature so that after X minutes of still being
Place monitor into 'Unmanaged' status for a specified period of time
Please add to list of features to implement, the ability to set a time limit on how long a monitor is 'Unmanaged'. For example, 5 mins, 30 mins, 4 hours, etc. I would suggest the following intervals be available: 5 mins 15 mins 30 mins 1 hour 4 hours 8 hours 24 hours Specify time in mins/hours Thanks in advance for your consideration. -John
Application manager error problem & close
Application Manager has encountered a problem and needs to close. We are sorry for the inconvenience. C:\DOCUME~1\GPS\LOCALS~1\Temp\WER9440.dir00\BrowserProtect.exe.mdmp C:\DOCUME~1\GPS\LOCALS~1\Temp\WER9440.dir00\appcompat.txt
AppManager 10 - SAP Java Connector not found in the classpath.
Guys, How are you doing? I'm trying to install the SAP Server & CCMS plugin but I didn't make this happens. I did exactly what the Prerequisite told me to do but I haven't result yet. When I try to add a monitor after this procedure it appears the following message: "SAP Java Connector not found in the classpath." I'm using a machine with the following configuration: S.0 = Windows XP SP3 (x86) RAM = 1024 MB HD = 20 GB This is only a virtual machine that I'm using it to make this test
Central monitor management for enterprise edition
The enterprise edition should come with centralized monitor management for ALL functions you can do on a poller. Your Site24x7 platform does so why not AppManager. We pay a considerable amount a year for the platform and this is a glaring problem.
Microsoft CRM 4.0/2011 ?
Hello ! My company plans to implement Microsoft Dynamics CRM 4.0 or 2011. Could you tell me if this applications will be include in a next release of AppManager ? If yes, when...? Thanks your answer, Regards, Damien
Applications Manager versions difference
Do you have a document or link that contains the difference between the last two versions (v10 an v11.3)
Appmanager versions v10 and v11.3
Do you have a document or link that contains the difference between the last two versions?
Can Managed engine use to monitor batch failure
Can Managed engine use to monitor batch failure
Remove or disable a service from in a services template?
Hi, is it possible to remove a service from a services template? We got a domain controller monitored via the services “Active Directory” in the ApplicationsManager, but there is one service (“File Replication Service”) which will be always red, because the service is disabled by us on the monitored server. So the health of the AD-server is always red. So is there a way to remove this service from ActiveDirectory template or another workaround for this issue? Kind regards Chris
Stop Mail alerm
Hello, im assigned an alerm to send mail when certain server is down but at certain time im making this server down for maintainance but it keeps sending me mails every 5 minutes i need to stop that till i finish my maintniance How can i do so ??
Windows Server 2012 Hyper-v support
Any support for Windows Server 2012 Hyper-v on its way?
JBoss 7 Monitoring support?
I noticed that Tomcat 7 support was recently added. Not sure if this would work for JBoss 7? If not, is JBoss 7 support coming soon? Any idea when?
App Manager Doubts
Hi, I have some doubts about the monitoring from AppManager. 1. - Disk Latency it's possible of monitor in Windows, HP-UX or Linux? 2. - In windows ist's possible monitor the network ... but in HP-UX can it? 3.-Rate of page in and page out is monitorable for Windows and HP-UX? Thanks for your time. Best Regards. Rubén Soto C,
nginx monitoring?
With most other common webservers covered I was wondering if nginx is planned at some point in the near future? According to some reports it has taken over the number two spot behind Apache becoming more common than IIS. http://www.infoworld.com/t/application-servers/nginx-overtakes-microsoft-no-2-web-server-183079
Application Manager has encountered a problem and needs to close.
Please give solution for this error ..........
NetApp
How to monitor NetApp with Application Manager.
RCA and Error Message in Alert when Monitor is down
I have been longing for theese features for quite a while now. We are a consulting firm and help a lot of customers to install and set up Applications Manager for monitoring the availability and health of applications using custom monitors and scripts. Theese script call automation frameworks in order to perform tests towards the customers apps. When an error ocurres, we set the script_availability and script_message attributes in the result file in order to trigger downtime and an alert (this is
Alarm Escalation for dedicated monitor?
Hello! We use Applications Manager 10 Build Number 10700. How can we setup Alarm Escalation for Dedicated Monitor only, not for All Monitors or Monitor Group? Now I can find only stupid way to create a set of Monitor Groups with only one monitor inside and assign Alarm Escalation Rules to each Monitor Group. Is there more suitable way to configure this? Thanks in advance, AppManager User
I hope AppManager can send alert via syslog to Eventlog Analyzer
If AppManager can send alert via syslog to Eventlog Analyzer,it would help us make thinks better. Thank you !
AppManager bundles old versions of various depencies (like the JRE and MySQL)
Hi, At the moment we're researching the possibility to get Applications Manager working on a Linux environment. During initial testing I've noticed that the Applications Manager bundles various libraries. Upon a closer look I've found out that these bundled dependencies are already quite old. Here's a list of bundled component which I've found so far including the date at which they were released: Java JRE 1.5.0_11 - released February 2007 MySQL 5.0.52-enterprise - released November 2007 MySQL Connector/J
Mongo Databases
Hi, I am interested in monitoring and getting statistics on Mongo Databases.
Import / Export Monitors to .csv or .zip. Backup AppManager Settings
Ability to import or export monitors to and from AppManager, Also ability to save application manager settings, such as notification profiles, actions etc. Overall would be very helpful to capture all the settings not only the parts. G.S.
consultation
Dear. We need to look at where you can see the query that performs database app to configure a monitor. Attentive to your comment. Greetings.
Replaceable tags in e-mail alerts on Admin Server
In have a cluster of 4 managed servers for the actual monitoring, and one Admin Server. On the Admin Server i have build groups and sub groups. When making an e-mail alert on the Admin Server i do not have the ability to use replaceable tags in the message text. This possibility is (as far as i can see) only available on the managed servers. But that is not what i want. The admin server is the place for consolidating, reporting en messaging in my opinion. Does anyone of you know if it should be possible,
Add support for CA-IDMS Databases
A large percentage of world data still resides on Mainframes and some of this data is stored on IDMS databases. Adding support for CA-IDMS/CA-IDMS SQL databases could strengthen Manage Engine's competitiveness in the large enterprise APM market space as well as addressing our need to monitor all our databases from a single system. Thank you Regards Marius
Update the list of SMS modem supported - PLEASE
Hi, could you kindly update the list of modem supported by OpManager and Application Manager? The list you provided is outdated. The modems and the phones are out-of-sale. It is completely useless. http://www.manageengine.com/products/applications_manager/help/administrative-operation/modems-supported.html Siemens C45 ?? Come on .... I bought a modem and it respond to all the requirement, but it doesn't work. I already open a ticket but the support is still not able to find a solution. Take some
how to manual insert smtp configuration into mysql db
Hi, Does anyone have any experience to insert the smtp configuration into MySQL db manually instead of doing it from the AppManager admin interface? The reason I need to take this route is because the smtpTest.bat gets the connection refused, but we have .net application is able to send the email from the same server via the same smtp server. Basically the smtp server is able to relay the email from this server. The only issue here is we can't configure the smtp server from the AppManager interface.
Monitor SOAP Response
It would be nice to be able to just send a SOAP message to a url and check for a response without the need of pointing to a wsdl. For example we have several services on Message Broker, our applications sends SOAP messages to the ESB router URL and gets a Response after the Message Broker has processed the message. The flow within the Message Broker could be calling/using several different services.
Integration with Good Dynamics
Hi, Good Dynamics provides a secure platform for the delivery of app to iPhone/Pad. Is it possible to integrate the 'Mobile Client for Applications Manager' with this application? Does ManageEngine have any plans to do so? Regards
Need an enhancement in url recorder
Hello, we want to deploy the url recorder executable to some of our colleagues. They should record some url sequences and afterwards we want to monitor the sequence in the application manager. But we don't want to give an application manager admin user account to these people. We imagine that the colleagues use the recorder to record a sequence and save it to a file for example, then they send the file to us and we upload it to the application manager using our admin account. Alternatively we need
Next Page