Import Devices
Hello, how can I import all 71 devices? Regards Kjell Import Devices All Devices(71,60 new)* HP ProCurve Switch 2824(1,1) HP ProCurve Switch 5304XL(1,1) Linux(4,4) Unknown(15,15) Windows 2003(27,27) Windows 7(12,12) Indicates newly discovered devices * Only newly discovered devices are selected by default
Dashboard names not appear
Dashboard names not appear Instead it appear lik this format: @(dashboard.name.nwoverview) @(dashboard.name.top10) also when I open (New Dashboard) Widgets appear in the same format @(widget.typename.alarms) @(widget.name.allalarm) @(widget.name.devicealarm) How can I fix this and make the names (like Alarm and Events, All Alarma, Devices with Alarms, Down Interfaces ..etc) appears? I tried uninstall then reinstall without success. Thank You in advance
Can OpManager listen to SNMP traps and poll using multiple interfaces?
Due to our network design I need to have my OpManager box listen to SNMP traps and poll devices on multiple interfaces. Is that possible? I have one network area to monitor and to reach it the traffic needs to go out eth0 and I have a different subnet that needs to be polled and the traps need to be received via eth1. Is that a supported and possible configuration? Thanks Joerg
Business View Error
i have create a businees view on OPManager but an error was accour, and i cant delete it because i can't go into the business view, is there anyway to delete it? thanx
OpManager DE Error Discovering Device
I have recently removed several devices from OpManager as they were not discovered correctly, after deleting them, I can now not re-add them. Recieving the following message "Entries for the device are either partially added or removed.Click [here...] to remove and readd the device" I have tried to access the fix at https://opmanageree.wiki.zoho.com/Remove-stray-entries-from-database.html but am told that "opmanageree.wiki.zoho.com is not accessible by you." Could someone please provide a fix/link
Error on OPManager
Hi Guys I get the following error when trying to add the SMTP server Unable to insert primary mail server record Any ideas? Thanks
SMS Server
Hello, Is SMS server like - MultiModem® iSMS intelligent SMS server supported by OpManager? Thanks, Kin
Problem whene loading MIB
hi every body i have problem when i try to load HP procurve switch mib i need to monitor the backplan utilization here the photo http://www.mediafire.com/imageview.php?quickkey=y32e01qpoiytpr8&thumb=4 http://www.mediafire.com/imageview.php?quickkey=zmbmxcqo528nc2r&thumb=4 here the mib http://www.mediafire.com/?23n1j2lckbrrqbp http://www.mediafire.com/?jkmdi692f17cb6i
How to configure OpManager trap receiver community string ?
Hi, If device is sending trap to Opmanager with community string other than 'public', will Opmanager accept it ? Or is there a way to configure trap community string in Opmanager ? TQ
SQL Services Notify Down when still running.
Hi All We have installed SQL Service monitoring on our servers. OpManager is reporting that the services are down on these, when we log in all the SQL Services are still running. When we look at the report for the service it says that these services have an uptime of 100%, however we get email and sms notifications that they are down. Notification we receive is below MSSQL Server, SQL Server Agent, SQL Browser Services are Down Service Down UnAssigned VirtualDevice Jun 10,2011 10:53:30 AM Any ideas?
Error loading RightFax MIB
Hello, I am attempting to add a MIB to our OpManager installation (Verison 8 Build 8025) and am receving an error: "Error parsing MIB:AVTC.mib Exception while loading MIB:Could not parse the file C:/Program Files/AdventNet/ME/OpManager/./mibs/AVTC.mib. Couldn't resolve these TC constructs : { Integer }" The MIB is for the RightFax application and is attached to this post. Can you assist please? cheers Tim
Cisco ACS 5.1
Hi, is there a way to monitor Cisco ACS 5.1 appliance? It supports SNMP v1/2c, I added it in with discovery, but I don't have anything in performance monitors. Regards,
No monitor with update firmware
Hi i just update firmware of a Fw/router for Netgear FVS338 to the latest 3.0.7, In this Firmware the netgear said that the implement the OID for CPU utilization. I think i got the OId for this but how i do i implemented to the MIB or how do i get it to work i still dont get any Graph for this. Thx very much A.S
OpManager/Device Expert/OpStor On The Same Server
Please note currently I have OpManager and Device Expert installed on the same server. I would like to install OpStor to the same server. Will there be any issues or conflicts?
Help plz a beginnger in IT, Graph problem
Hi i am a beginner in Network and IT and currently studying the Network systems :D i am tryning to use OP manager to watch over my AP at home but i cant get the graph to come up i have a Netgear AP WG 302 and a Netgear WINAP 350. I have done all the trouble shooting check SNMP on both so its enable and i have open the service for SNMP for my computer. one thing i dont understand is that how to check the MIB browser i am getting OID from the Host resource MIB when i push the get SNMP from the device
clear notification received when alarm was not critical
Hi, I have a notification profile set up to only receive critical severity alerts. I also need to be notify if this critical situation clears. My problem is that if you select the option to be notified if the alarm clears it will notify for every severity. So if a threshold monitor goes to the attention severity I don't receive the alarm. But if the attention severity clears I receive a notification. Is there any way to control this? I would like to be able to be notified only if the same
Service Pack 8.8 released
Hello Everybody, We are very happy to announce the release of Service Pack 8.8, Build: 8810. Here is the detailed list of feature enhancements made and the issues fixed. Feature Enhancements 1. VMware ESX/ESXi version 4.1 is now supported. 2. View the domain controller dashboard in VM snapshot page. 3. Apply warning and error thresholds across multiple ESX hosts and VMs using Device templates. 4. NFS datastore reports are added for ESX v 4.1. Generate reports such as Disk
How to disable the Trap Processor? The changestatus link doesn't work.
I do not want the opmanager recieve any trap. but it still has trap alert info, even i disabled the trap processor by click the link of "changestatus" and keep the ico like this .
Watchguard 830f
Hi, We've just purchased a Watchguard 830f and I was wondering how i add it into Opmanager? It comes with the following SNMP files : IF-MIB.txt IP-MIB.txt IPSEC-ISAKMP-IKE-DOI-TC.txt RFC1155-SMI.txt RFC1213-MIB.txt SNMPv2-MIB.txt SNMPv2-SMI.txt TCP-MIB.txt UCD-SNMP-MIB.txt UDP-MIB.txt WATCHGUARD-CLIENT-MIB.txt WATCHGUARD-INFO-SYSTEM-MIB.txt WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB.t WATCHGUARD-IPSEC-SA-MON-MIB-EXT.txt WATCHGUARD-IPSEC-TUNNEL-MIB.txt WATCHGUARD-POLICY-MIB.txt WATCHGUARD-PRODUCTS-MIB.txt
OPManager doesnt working
i had installed OPManager into my desktop, i set for port of locahost is 8080 and i have ceate a rule (on firewall) to allow it. but i still cant openned from my browser (Mozilla), it always said "problem loading page", what should i do?
Increased polling if device is down
Hi everyone, I'm not sure if I'm phrasing this right, so I probably have missed it when I searched. Here's my question. Let's say we're monitoring a device every 5 minutes. Then it goes down for 2 minutes. Op manager is going to record it was down for at most 5 minutes depending on when the last poll was. This doesn't sound like a big deal but it can add up over time. Is there a way for op manager to start polling a device more often when it goes down? Say like every 30 seconds or 1 minute? Then
Switch map view
I'm adding switches to my system, if I go to Maps Switches I now see only icons, but I want to see the switches on the lefthand site and de ports on the right hand, How do I get this view back again? RJ
Report on Un-Acknowledged Alerts
Team, If i would like to get a report of last 12/24 hours Un-Acknowledged alerts,how to get this? One more - if a Trouble ticket is not attended within say 4 hours iwould like an email to be triggered to Escalation DL. Thanks, RK
Max URL string size?
Is there a limit to the size of a URL string that can be used as a monitor. I'm able to paste a long URL into the add monitor dialog and successfully "check" that it works. However when I click 'OK" to add the URL monitor, the web page never returns and the monitor is not added properly.Below is an example URL. http://xyz.abc.com/render/?id=eyJpZCI6NzExLCJ0YiI6Ik5ZIiwiaWkiOjYwODMwNDksImN4IjoyODM4LCJjeSI6MjA5NCwid2giOjgwMCwiaHQiOjgwMCwib3ciOiI4MDAiLCJvaCI6IjgwMCIsImNoIjoxLCJkcyI6MSwibnAiOjAsImhkIjoxMC44MSwiaXQiOjIsIm9mIjowLCJxcyI6ODAsInRjIjoiZmZmZjAwIiwiZmMiOiIwMDAwMDAiLCJ0cyI6MTMwNjk0NzY3MCwiaGsiOiIxMzRhODcyYzJlZDkxMTc2MGMwNWNhNmY0MDE1NWJiZCIsImZlIjoiIiwiZnMiOm51bGwsImZ6IjpudWxsfQ
Cannot discover Windows Services
Hello, I want to monitor windows services, and I'm clicking on 'Click here... to discover services from device.' but list returns empty. I've verified credentials and they're OK. Can you help me find out what's wrong? thanks,
Test Cridential Ok, but not test monitor
one of my client using OPManager to monitored their server and they asked me to configure it. then i set up the SNMP and WMI on OPManager and the servers. all server was detected by OPManager and then i want find out whether the SNMP and WMI that i configured is working or not and i tested using "test credential" and its working. but an arror occured when i want to configured the utility (CPU, memory, ect) it said like the SNMP is not running . what should i do to fix it ? thanks
Changing Database Login
When I am trying to change the login information for the OpManager application away from SA which was used during installation I get prompted for a jar. This is for SQL Server 2008 not mysql so which jar do I use?
Support MS-Exchange Mail Server?
Dear All, Our customer receives the mail though MS-Exchange Mail Server (is not SMTP Server). How to configure MS-Exchange Server in Mail Server Settings of Admin tab? Thank you in advance.
Can i hide the two arrows on business view link ?
Two arrows is added into link on business view, it is little strange. I think it is better to cancel the two arrows, or add a option for user to choose if display the two arrows.
Have any Option to change MAP Name in OpManager?
Dear Support, If there any Option to change MAP Name (Business View) in OpManager? Regards, Furqan Akram
OpManager Reports
Hi to all and thank you for a great product. I would like to know if I could consolidate all devices (per category) into my monthly reports? Instead of having to receive individual reports on every single device in OpManager. Thanks.
Business View Device Icons changed after change of System Type
Hi I added a new device to the OpManager and insert them to a Business View. I changed the Icon to winxp and circle and saved the business view. Then I saw, that the device has the wrong system type (Windows 7). But the device is a Windows 2008 Server. So I changed the type to Windows 2008. When I now look to the B. V. the Icon has changed and can't see the circle any more (see attachement). That the icon changed to the new type is good, but that the status of the device is overlaped from the icon
Error parsing MIB:LIEBERT-GP-ENVIRONMENTAL-MIB
Hello I have this MIB: LIEBERT-GP-ENVIRONMENTAL-MIB.mib from this sites http://www.oidview.com/mibs/476/LIEBERT-GP-ENVIRONMENTAL-MIB.html, i want to monitor UPS liberty temperature Error parsing MIB:LIEBERT-GP-ENVIRONMENTAL-MIB Exception while loading MIB:IMPORTS failed: Could not find the file : C:/PROGRA~1/MANAGE~1/OPMANA~1/./mibs/LIEBERT-GP-REGISTRATION-MIB Could someone help me?
Twitter in OpManager
hello guys! any tips on how to set up Twitter in OpManager to the latest version? the messages from the set are not being redirected to the page of Twitter. someone already managed to set up?
Opmanger 8.7
Opmanger 8.7 include Cisco IPSLA Monitoring ? how many IP SLA it supports
Opmanager SMP: CPU utilization show different values using WMI or SNMP?
Hi there, At one of our customers the probe registers different value's for CPU utilization when using WMI and SNMP. Does anyone have an explanation for this? The server is virtualised using VMWare. Although you could say that the snmp graph is for the VMWARE installation and the wmi graph is for the server installation I don't think that could be the case. They both have different IP-addresses so the information cannot be presented in the same device. SNMP graph: WMI graph: regards, Jmerkx
Link is errror on network map
All hangar6-* switches should be connected to Hangar6 swithch, but Opmanager connect them to coreswitch. Hangar2-2, kitcenter and kitcenter2 should connect hangar02 only, not connect to core switch. Hangar04 and hangar05 should only connect to core switch only. Error opmanager network map: The correct network map :
What is the meaning of the Below Alarm?
sysUpTime.0: 50 days, 13 hours, 56 minutes, 39 seconds. , snmpTrapOID.0: .1.3.6.1.6.3.1.1.5.3 , ifIndex.10026: 10026 , ifDescr.10026: FastEthernet0/26 , ifType.10026: ethernetCsmacd , .1.3.6.1.4.1.9.2.2.1.1.20.10026: down , .1.3.6.1.4.1.9.1.1025 ehsan-gf-SW03 Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(50)SE1, RELEASE SOFTWARE (fc2)Copyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Mon 06-Apr-09 02:25 by amvarma
Alarm AuthenticationFailure trap
Hello; Im receiving the following alarm every 2-3 minutes on some servers "The AuthenticationFailure trap is received from ServerNAme. The trap details are as follows," the alarm severity is signed as Trouble ... do anyone receiving same error or do anyone has an idea about this alarm??? please your help
2 servers with identical traffic
I have 2 servers showing identical traffic graphs for their interfaces. Before I remove them both and lose any data on this, we would like to see if we can determine why this is occuring. Thanks Jason
Next Page