email alert about opmanager
Hello, I have a prolem with email alert. About email alert that I received ,the "Alarm Details" part have superlinks,as follows: Message 设备停机: 最后5次论询没有应答 Device Name test_test Above the superlink format is http://mideavm-19/devices/objectdetails.do?requestid=SNAPSHOT&name=10.16.244.50 But I can't visit the above link,and I want the part red marked be replaced dns name ,not hostname. How can I do that?
Bandwidth Monitor
Hi, I'm testing the OpManager and after discovering my firewall, I edited the interfaces where Internet and MPLS links are connected to set the max bandwidth values(10mbps, 20mbps). On the Interface Screen it shows the right value, but when I add the widget "All Interfaces Bandiwdth Utilization of a Device", it shows the real interface value (104M, 1.048G). There's any widget that will show the maximum bandwidth that I configured? Best Regards, Augusto Finamore
Performance Monitor - Router and Switches Interface
I need to activate some more performance monitor on some of our routers and switches that we are currently monitoring. However I need to setup the threshold levels of each or some of the performance monitors options. Do you have a baseline document that can help/guide me in setting out the threshold levels alert and rearm values. Recommended settings for Drop Events Statistics, Oversize Packets, Undersized Packets, Total No. of Collisions and so on. Got a mixture of L2 and L3 Cisco and HP switches
Receive E-mail Notification when an Alarm is Triggered
Is it possible to setup a notification profile, that will e-mail me when an alarm is triggered? I am mainly looking for alerts on Windows Services / Processes. I am currently monitoring ALL of the services that I need to, on all of my servers, however the only way I can see to set up a notification e-mail is to choose all of those services again, one by one, (without the aid of alphabetization) during the notifcation profile setup.
Voip Monitor Reporting Packet Loss
I have added a voip monitor to my opmanager system and it appears to have added the correct information into the router. It is monitoring and reporting all the information but it appers to think there is packet loss on it as well. Packet Loss threshold limit violated ( > 1). Packet Loss for router1 to 11.11.11.11 is 6 That is alerted over and over and they will clear, then alert all over again. The output from the router shows1 packet loss on the ip SLA but a constant ping never drops. Opmanager
Can I make a query on eventlog rules?
Can I make a query on eventlog rules to find out whitch server has assigned it? Thanks for help. Regards Bernhard Frey
Displayed in French
Dear support Currently I am using a time that the optmanager very good but there are some questions as follows 1 / When you install NetFlow Traffic Analyzer plugin, the entire font is displayed in French, it is difficult to use. 2 / Currently, there are plugins or add-ons that can be integrated with optmanager to see on the FW ports are Nat and router? Now you can scan only port opened on the router and server only. Thanks & Best regards Thang
how to configure snmp agent in AIX 6.1
Hello, I am trying to connect my AIX box by SNMP but failed. Can you please show me the step by step snmp agent configuration in AIX 6.1 for Opmanager to work perfectly.
credentials not working
I have just installed OpManager. It successfully discovered my devices on my LAN and afterwards I selected the devices I wanted to monitor. All of my devices are listed as unknown, so I go and categorize them in their proper category. The last item to input is the password, so I put the username and password in manually and I have also went to admin and placed them in credential settings. It don’t matter which way I try to place the credentials, after I hit test credentials it comes back with, user
Juniper firewall with Screen OS
hi every one i have juniper firewall related to netscreen corp that use screen os i need to configure netflow on the firewall is opmanager support Screen OS configuration
Issue with ESX 4.1i to be added in OPManager upgrade to build 8811
Hello, I upgraded OPManager to build 8811 then I tried to add a new esx 4.1i in OPManager. I configured SNMP and created an account usable in OPManager to get information then ESX 4.1 is added but I got this error message Could not collect data, HTTPS connection may be slow or not responding. Probable reasons are timeout, more connections, invalid username and/or password. Username and password are working fine. Can you point me in direction that I can check? Best regards Philippe
Grouping of eventlog rules and notification profiles
It should be nice to group eventlog rules. In my case we have some eventlog rules with status ignor. When I could group this rules to one ignor group I only add one rule to a new server. Also grouping notificaiton profiles. Sending a mail and starting a program on the same trigger (e. g. eventlog rule, threshold etc).
Creating new device type
I want to add an APC AP9630. How do I add a new device type? More importantly, Where do I obtain the information for creating this device? I am not sure what information to ask the manufacturer. I see an APC7830, but I need to add a 9630. Thank you Drew Shafer
Device Discovery
What's the easiest way to find MIBs & OIDS for specific devices? I have a ton of Dells, and some times they provide data and sometimes they do not -> I know the service credentials need to be correct, but this has been stumping me...I can have (2) Optiplex 380(s) and use the same template, but sometimes they will poll and other times they will not What is the best way to go about this when WMI & SNMP aren't connecting? I've read the documentation, but any pointers or quick tips on identifying configuration
Device not discovered
help... i installed the probe on my desktop and nothing. the service is running but no informaiton is showing up on the OpManager program.
Monitor folders under FTP service
Hello, I need to monitor folders under a FTP service. It means that I need to log via FTP then I need to check if a specific folder is available. I got this request from business due to some applications installed are using FTP as interface to exchange files. Is there a way to do it via OPManager ? How Can I do it? Many thanks for your answer Best regards Philippe
OPMANAGER - Problem with replication
Hi friends, I´m facing a problem with the replication between two machines with the OpManager failover installed. The problem is (Consider that all services are running normally): --> When I simulate a hard shutdown in the Primary Server the standby server assumes the application normally and after this when i try to get back the Primary Server services the same starts normally and tell to the Standby Server that is everything ok now and the Standby Server come back to monitoring the Primary Server
URL Monitoring using Opmanager
Hi There, I'm trying to monitor some services running on the web. For that I need the URL Monitoring functionality in Opmanager. My problem is that I can't pass trough the ISA server. There's any configuration that I need to do the accomplish this? Thanks in advance.
OPMANAGER - Replication
Hi friends, I´m here again to ask you some questions. First I´d Like to thanks for your help with my doubts and also to say that your support help me trully. Well, I´ve made an Opmanager instalation in two machines with replication. I followed the Manage Engine Instructions to made it and it works very well but I have the following doubts: 1-) If my Primary Server suddenly shutdown the Stand By server will assumes the same IP Address? 2-) I realized that the replication process create logs that the
Need Help with ManageEngine OpManger Probe Service
Hello Guys, I am facing a really bad problem here. I am trying to Deploy a Probe at a Client Side. Even after trying for about 10 times of reinstalling the probe, the Probe Service never stays in Start State. The Client Server is Windows Server 2008 R2 Enterprise with Service Pack 1 Please Help. Thanks, Saurabh
Mount Point monitroing
Is there a custom WMI monitor for mount points for Windows servers?
Modify threshold value for all Domain Controllers
Is there a way to modify the thresholds for a monitor on the domain controllers (active directory) such as OS Processor Queue Length? We have a lot of domain controllers that go above the default value of 7 every day. I don't want to have to modify this at each domain controller...
Interface name not available while creating new dashboard
Name: Last N hours Bandwidth Utilization device name: bladesvr.blabla.com interface name : interface not available period: last 24 hours I try to create new dashboard for esx server but it is not possible.
How to exclude some events to be sent using notification profile!
We would like to monitor all system event from one system except some which are few many.Is there are possibility that events to be excluded from notification ?
Customer Monitor in Opmanager 8.0
Any one know how can I create a WMI customer monitor using vbs.
Display server properties with SQL addon monitoring take a LOT OF TIME
Hi everybody, We bought (and are still in test phase) the SQL monitoring add-on. And since i put the dashboard SQL on every SQL servers we have, then discovered every SQL instance and every DB attached to every instance. Now the opmanager website is lagging and sometimes freezing when (trying) display the server page. My config : Virtual Server windows 2003 R2 x64, 4 vCPU, 8 Go RAM. I have less than 500 devices and less than 500 interfaces monitored. and in the top of that,... the opmanager production
How do I write a plugin for OpManager
- is there any documentation for this? SDK? Cheers, Kev Ward.
unknown devices
Hi everyone am new to this product and also monitoring. Does opmanager recognise only branded computers. Bcoz we have desktop assembled from different vendors...
Bug: Can't add custom WMI monitor if the name begins with % character
Hi i've noticed while trying to add a custom WMI monitor that begins with % it doesnt work. After clicking ok the page briefly displays "Error" and then goes back to the server, no monitor added. Some examples of counters ive tried to add: Processor\%Processor Time Memory\% Committed Bytes In Use PhysicalDisk\% DiskTime Is there a work around for this? Regards Jared
Map not update
Hi Support Team My Customer have problem about OpManager V.8 (Build 8723) . I install in Widows Server 2003 R2 Standard Edition Service Pack 2 . My Problem is sometime the symbol in map not update status. I try to poll but it still the same. If i unmanage and manage it the symbol will update . Please help me to solve the problem. Thanks Ittiphol.C
Error parsing MIB:NOKIA-IPSO-SYSTEM-MIB
Dear all, I have some issue by monitoring a nokia appliance. When I am trying to load the mib enclosed, I receive the following error message : Error parsing MIB:NOKIA-IPSO-SYSTEM-MIB.txt Exception while loading MIB:Could not parse the file C:/PROGRA~1/ADVENT~1/ME/OPMANA~1/./mibs/NOKIA-IPSO-SYSTEM-MIB.txt. The error occured at the line no: 811 ,column: 9. 1. The keyword 'ACCESS' or 'MAX-ACCESS'may be missing. or 2. The keyword 'SEQUENCE OF' may be missing. or 3. The syntax with invalid subType construct.
Is VMWare ESX server status linked to VM?
Hi, I have several ESX servers configured in OpManager each one running several VM's. On the ESX server there is no alarms, all the monitors are clear but the status of the server is trouble. It seems that the status of the ESX server changes depending on the status of the VM's that are running on it, is this correct? If it is, can it be configured somewhere? I don't want the status of my ESX server to change when there are alarms on the VM's. Each of the VM's usually have their own snapshot
Map View Missing Options
Recently we went to visit a company that was already using "OpManager" to see how they used it. We were interested to find that they appeared to have have additional options available to them when viewing a Business View. When they selected the Business View they had two additional menus; "Currently Showing" and "Set THis View as Default". The "Currently Showing" menu allowed them to view the map as a "Map View", "List" or "Traffic Map" (See below) When we look at our Business Views we dont get
Process Count
Hi We have a server that runs multiple instances of a process, i want to know when more than 15 instances are running. I've set this up but my problem is that an alarm is generated when the process is not running, in our case it is normal for the process to sometimes not run, i only want to know when more than 15 are running. Is this possible?
Update problem
Hi, Performing update 8810 on a 8722 results in a crash on the installation. After reboot server everything is back to "normal" but still 8722. Trying again results in a identical problem. I get this message in the event viewer mysqld-nt: Incorrect key file for table '.\opmanagerdb\objectstolink.MYI'; try to repair it Anyone suggestions to solve this matter? Thnx
Opmanager 8.8 - Installation
Hi friends, I´m from Brazil and I´m facing a problem with this application. I´m trying to install the Opmanager 8.8 in Cobalt Raq 4i with the S.O Strongbolt 1 (Modified CentOS4) My kernel is: 2.6.20.1i586 (32bits) The problem is: ============================== When I try to start the application by the command below the starting process does not finish and the last sub-process that my hardware can´t do (i guess) is: ---> Checking insde Addon Command: nohup /opt/ManageEngine/OpManager/bin/StartOpManagerServer.sh
OpManager with MS SQL 2008
I want to install OpManager with MS SQL 2008. Can you share the step by step procedure to perform new installation of OpManager with MS SQL 2008.
sms customization
Hello, How can I customize sms message for SNMP traps ? At the moment there is extra details: skd-hq-rb1 (Server) – Critical generated at May 16.2011 05:52:03 PM .1.3.6.1.4.1.1000.1.2: <trap info> OID and some words can be skipped. Can you please add customization in Admin ? Also, how can I choose sms length ? At the moment it's 125 chars, but it can be 160 chars. Thanks
Build 8723 - VM Performance Monitors
Is it possible to set thresholds/alerts on "CPU Ready"? Data is being captured and is reported for each virtual machine, however i cant find where to setup an alert. Regards Jared
unable to configure OPManager to detect using SNMP the switches
I have this problem with OP Manager. I have already entered the RO and RW credentials to the switches but OP Manager cannot detect this. What appropriate Credentials must I use as well in OP Manager? It asks me for the following: Username Password Command Prompt Login Prompt Password Prompt Port Number: 23 Connection Protocol: Telnet I'm not entering this info when I' Telnet to the switches (only the password). Hope you can assist.
Next Page