Hyper-V monitoring: Preview release
Hi All, We are pleased to announce the availability of OpManager HyperV Monitoring preview release . To cater the growing needs of virtualized environment, we released our enhanced VMware monitoring recently. In addition to it, we have been working on HyperV monitoring module for quite sometime and it has come out in good shape. Please fill this form if you are interested in testing this preview release and sending your valuable feedback and suggestions. You will be getting a mail with the download
TRAP SNMP
Hi, I can't see any traps in unsollicited view. - Traps are received on OpManager server (check with tcpdump) - I can See traps with trapViewer on OpManager server (AdventNet MibBrowser) - SNMP Trace service is up on OpManager server - The device sending traps is managed in OpManager - I Got no snmp trap processor What's wrong? is there any log? how to configure the community string in OpManager server and make sure the traps is set to accept from any host? Thanks
Monitor Physical and PageFile memory at the same time?
Any idea how can i monitor the Memory utilization for the Pagefile and Pysichal memory at the same time?
Difficulty setting up Windows service notification profiles
Anyone notice how difficult it is to setup a notification profile for Windows services, or am I just doing it wrong. I have all of my services that I want to monitor, already being monitored, however when I want to setup a notification profile for this server, I have to go through and pick the services I want to monitor, from a list. This wouldnt be so bad except the fact that they are not listed ALPHABETICALLY. What a PAIN! I have been able to work around it by using an alarm escalation profile,
./RepairDB.sh: line 16: myisamchk: command not found
op manger is not running and it is showing to run teh repair.db i run that one it showing the error ./RepairDB.sh: line 16: myisamchk: command not found any one can help on this
Starting AdventNet WebNMS "Primary" Server Modules, please wait Process : DBServer [ FAILED ]
can any one guide for this error ASAP an dmy os is ubuntu
OpManager not scanning after backup loaded
We are running version 8723 and are having a problem. After we reloaded a previous backup (using only the config backup) OpManager will no longer scan all of the network devices for status. The only one it looks like it usually scans after loading is the closes router (which all other devices depend upon). But that router is up and snmp data is being pulled. Is there any way to refresh or force OpManager to start scanning.
DNS name not display
I have 750 devices being monitored by OPmanager ver 8723. However, some of the devices only display the IP address and some display the DNS name. How to resolve this issue..? regards, anathan
SYS-ADMIN - opmanger not reporting xxx-xxx-xxx disk space correctly
Hi, We have an issue with OpManager reporting 120% disk usage. ie setting 200% as the total size. It is monitoring a 10Tb HDD is this a bug? Is there a fix for this at all? Thank, Andy
OP Manager 8 showing wrong Memory utilization and Disk usage information
Hi all, MY OP Manager 8 showing wrong Memory utilization and Disk usage information of windows base Hyper V machines. If i manually check memory utilization of servers then they show different values and OP manager showing other values. Your Prompt response will highly appreciated. Regards, Arshad Khan
Process Monitor
Hello, I am trying out OpManager and I am using the process monitor but wondered if there are any actions it can take when a process is say, high on CPU? Menaing, when the threshold is detected on CPU on a particular process could it say, reboot the machine? Kill the process? -Wes
add-on Active Directory Monitoring
how to add Active Directory monitoring, because i have add 5 license (MSSQL,Exchange,Active Directory, and 2 more), for MSSQL and Exchange that feature can be showing but not with active directory, can somebody help me, thanks.
Monitor CPU and Memory on Foundry MLX-4
Hi, I can not see the monitors CPU and memory on my Foundry MLX-4. When I add them, do not appear on the list. So I created a new monitor but I can not put it on dial-graphs. Could you help me?
I dont able to take OP manager 8 backup
Hey, I am using OP manager 8 and i dont able to backup of my data using mention bellow steps. Start menu -> Programs ->OP Manager -> Data Maintenance -> Backup. An error is come and log is generated in backup folder, I am attaching this log so kindly look into it and do the needful. Regards, Arshad Khan
unable to install Probe in OP manager
i has install OP manager but im not able to install Probe. Can someone assist me on how to install the Probe ?
1067 error on service start
after a reboot the service will no longer start i have tryed starting from command line the port 7080 is not being used by anything else any ideas?
New Business view stuck at "Initializing Business View"
Hi. I have issue with the New Business view. It just keep on loading at "Initializing Business View", i been waiting for more then 30 minutes and nothing appear . Anyone have this kinda issue? I need help. Thanks Regards George Low
Device Template OID already associated
I am trying to create device Templates, I created a Template for Win2003 Web Server and now I am trying to Create a device Template for Win2003 DB server. Problem is, when I try and create the WIn2003 DB server template and query for the OID it indicates "System OID .1.3.6.1.4.1.microsoft.software.1.3.1.2 is already associated to the device package". Of course the OID's are the same as the machine types are the same however the templates have different data being monitored. DB servers monitor different
trap parser
Hi I have a problem with parser for trap from xmedius fax server (INTERSTAR -MIB) I was made Trap processor config but when trap received I got "No Trap Parser defined for received trap:.." Can anyone have some idea to solve this issue. tnx Ivan
How do you add CLI monitors to Device Templates?
Solaris template doesn't list the CLI monitors, so can't add them by default to all hosts. http://opmanager:8080/admin/AddDeviceTypeForm.do?operationmode=modify&typeid=165&operation=MAIN Want to be able to select the CLI monitors listed at http://opmanager:8080/map/addMonitors.do?requestid=SHOW_LIST&deviceName=uk2utvssinf005-sec.mfil.local&category=Server&moID=3584&type=Solaris&monitorName=Performance&vendorName=Sun Microsystems To the Solaris template so that every Solaris box added inherits
WAN RTT suppot IPSLA tests such as HTTP, TCP connect and so on??
Hi WAN RTT suppot IPSLA tests such as HTTP, TCP connect and so on??
OpManager monitor Exchange Mailbox stroe.
Dear all, Can we monitor the Exchange maibox store status whne it's mount or dismount ? Yusri
ManageEngine AssetExplorer Agent use port 443 will breake the IIS or Apache HTTPS connection
Dear all, As subject, this agent will use the port 443 on managed server. Will this break the IIS or Apache HTTPS connection? Our engineer report the oulook webaceess on Exchange server been broken by OpsAgent. Could any one have solution for this please? Many thanks. Regards
Can not add 1 ESX server
Good afternoon. We have 4 ESX servers. At all the same credentials. 3 ESX servers added with no problems in the monitoring system (OpManager, Build 8811). After adding a fourth server I get a notice that it is successfully added, but not on the list. Can you please tell how can I fix it?
OpManager Dashboard
Has anyone created any custom dashboards that utilise data from OpManager that they would be willing to share? Screenshots would be great! We are entertaining creating our own html dashboard that uses BizTalk to query the OpManager data and also embed OpManager widgets.
problem installing Oputils
I installed oputils. Now i see the service starting..and then stopping again. No screen appears. Any help available?
Unable to list the servers in Opmanager .My prob is not listed in central server
Hi , We have 2 prob and 1 central server. My one of the prob was down on last month .But my opmanger working fine using the one of the prob. now my another prob also down .prob also working fine and central server (web server ) also working fine. Now the issues was all of my server was not shows in opmanger .
Switch Interface shows 0% availability even though its up and showing traffic
I've got a Cisco Catalyst 2960 switch where some of the interfaces show as down when they are not. All of the traffic graphs show traffic (and the user is working fine) but the availability graph shows 0%. Other interfaces on this same switch work fine. It seems to be random as to which show available and which have this issue. Running OpManager 8811 on Win2K3 32-bit
Reports
Hi All, Can i propose that you have a link in your reports pages that shows the SQL that is executed to generate the report ? This will make is 100x easier to create custom reports from the back end database.
Error : Enter valid Email ID, while modifying report.
Dear All, We are getting below error while modifying report. Error : Enter valid Email ID .::[ashX]::.
How to convert snmp SysUpTime from milliseconds into human readable format?
How to convert snmp SysUpTime from milliseconds into human readable format?
Temperature display
Hi, I'm fairly new to Op Manager and i've been requested to try to put a display of what our current server room's temperature is into one of our maps. We have three APC probes and ideally, all three would display. Currently, we get notifications when the temperature has gone passed treshold, but it would be nice to be able to tell from first glance what the current temperature(s) current is. Below is the device details: Vendor: American Power Conversion Corp. Category: UPS Type: APC EMS Also,
Time stamp on page
Is there an option, or a file I could modify that would allow me to have a time stamp at the top of the page. The reason being is I have the automatic refresh set to every 10 minutes and the monitoring set to poll every 5 minutes. I would like to be able to tell the last time the machine was polled and the last time the page was refreshed. Thanks, Jenn
how to set a vm to alert afer N polls
Hi, i am alerting cpu and memory usage for my VM's using VM Performance Monitors i want to set to only send alerts after 2 polls can this be done if so how???? As this can not be set in the virtual machine template. Thanks, Stephen
opmanger after the probation period still used ?
Excuse me after the probation period still used ?
Removing Alarms from OpManager
Hello, I am testing the OpManager and I have setup some dummy alarms. These have now worked but I do not seem to be able to delete these and they are generating more than 400 a day. Can anybody help a newbie to this product? Thanks, Michael
OpManager v8.7 now supports VMware vSphere monitoring
Hi Everyone, We are pleased to announce the general availability of OpManager 8.7. Key features added in this release are: Agent-less discovery and monitoring of VMware infrastructure leveraging VMware APIs Support for ESX4.0, ESX4i , ESX 3.5, ESX 3.5i Out-of-the-box reports and monitors for over 70 deep VMware performance metrics such as CPU Wait/ Ready, Memory Balloon/ Shared/ Swapped/ Overhead, Disk Read Speed/ Write Speed/ Read requests/ Write requests/ Bus Resets and Network Usage parameters
telnet/ssh (CLI)
Hi, We having a problem in CLI on CISCO 2960 switch, because under change password menu there is no login Detail, the menu is Use this SNMP credential. That why we cannot telnet the device using OpManager. Please my screenshot for more info. We need your advice as soon as possible. Thanks, Joe Reyes Pre-Sales System Engineer AG Datacom.com Phils.,
Number of alerts
Hi, if a device is down, i get sms to my mobile (email 2 sms)... but i get 1 sms and that is it. Is there a way to configure OPmanager to send you an alert every 5 minutes untill alarm is cleared? i have thought about setting up the escalation to achieve that but you cannot configure the paramaters in the escalation... and it it a bit confusing... thank you, Levy
Url monitors gives false positives
We have an OpManager with a server that has 16 URL monitors configured (bound to a specific server). We recieve a lot of false positives with the message "Host unavailable" although I have verified using debug-logging on the DNS-server that the actual lookup is successful. When looking in the log (opmanager_serverOut1.txt), I see a lot of these lines: 19:23:52:256 ServerOut: http://www.host1.com Host Unavailable Connection refused 19:23:52:256 ServerOut: http://www.host1.com Response for url http://www.host1.com
Next Page