Mail server settings
Hi I have recently changed the mail server settings to use a different mail server. But when I set the "From Email ID" field, it is being ignored and the mail is being sent from the address that opmanager uses to authenticate with the mail server. Thanks Dave
How to duplicate OpManager to another site
Hi, I have OpManager that running fine in primary site. Since there were quite number of changes / configurations were done, is there a way we can duplicate the OpManager from primary site to other site? The most significant configuration what we done is SNMP traps, MIB files, Notification Setup, and Device template. So, doing this all over again is not a best practice and its time consuming as well. Note: All site using their own license key. -- Regards, Anandharaj System Engineer (Unix / Linux)
Derive new business view from existing?
Is it possible to derive a new business view from one that you have already created? I spent a good chunk of my time a few days ago creating a view of part of my infrastructure, but now I want to diagram out specific portions and it would save me tons of time if I could just derive a new view, delete all the irrelevant items for that portion of my infrastructure, and then save that view as a new one.
Bulk rediscover?
Is there any way, other than deleting and then rediscovering, to rediscover several devices from list view (servers, switches etc...) ?
OID in OPManager
Hi Gabriel, I can view all trunk state in MIB browser just need an OID for example: .1.3.6.1.4.1.6889.2.8.1.14.1.1.4 but in OPManager need add OID one by one for example: .1.3.6.1.4.1.6889.2.8.1.14.1.1.4.1.1 .1.3.6.1.4.1.6889.2.8.1.14.1.1.4.1.2 ..... How to show all state in OPManager?
Problem creating downtime schedule
Hi. I am using OpManager 8 (build 8052) and have an issue with the Downtime Scheduler for monitoring URLs. Some of our web sites are offline from 8pm until 7am the next day so I want to schedule downtime for this time window. However, when I set the start time to 20:00 and the end time to 07:45 it generates this error: End time should be greater than start time How can I get around this? I tried creating 2 schedules, the first from 20:00 to 00:00 and then a second from 00:00 to 07:00 but
Configure Network Interfaces for monitoring by OpManager
I am running OpManager 8 on Windows and have several Ubuntu 10.04 LTS servers. I have been able to get pretty much everything I want configured but cannot find a way to make OpManager identify the ethernet interface(s) in the servers. I haven't been able to find any information on net-SNMP or in the forums here.
Can only see one MSSQL instance
My SQL server have two instances but OpManager can only see one. Tried to rediscover. Tried to "Add Monitor" under "MSSQL Services" but the second instance is not listed.
Bug Notification profile alert time window
Hello, I have a problem with Opmanager 8 build 8050. When I try to make a new Notification Profile Rule for sending mails alerts, in a device (Add Profile > Select a Notification Profile > Define Criteria > Apply this profile during the below mentioned time window), I define From 18:00 To 08:00, all days, but this rule does't work after 23:59. Alerts are not send by mail ! I think that the problem is because the window exceeds 23:59. If this is true, how can I do otherwise? I need to create another
Manage vs Status Poll
Hello, I'd like to know why OpManager 8 is raising discard alarm on a switchport when that switchport is not set to Status Poll. It is configured only as Manage to gather data but when it receives a discard paquet, OpManager raises an alarm. thank you
Monitor HP Blade servers with OpMgr
Hello, I am writing to ask for an explanation of how to monitor HP Blade servers with OpManager, I read a guide to insert a folder in the MIB MIB, but I was not able to have a positive ... the model is BladeSystem c7000 Enclosure G2 How can I fix this? This is URL for the manual http://forums.manageengine.com/topic/hp-blade-center-monitoring
Monitor Drive Array Status for HP ProLiant Server
Hi Gabriel, The same model server and the same smart array raid controller.some of servers to pass the test and another can't get return value.
MIB browsing within OpManager - sort alphabetically?
I have MIBs uploaded for custom devices, Cisco, HP, etc..and I now find that browsing to a specific MIB to create a new SNMP monitor can be quite a headache. It would be great if the drop down menu for selecting MIBs as well as the MIB browser could sort alphabetically.
Availability Graph not showing
All of a sudden we have a Cisco 2800 which the availability is not showing up properly. We've attempted to repair the database but no issues were found. All other parts of the router graphing are working properly. Here are some screen shots of what it looks like.
How to change the RDP portnumber of Tools in the device's snapshot page.
Dear all, How to change the RDP port number of Tools in the device's snapshot page? We know that defaut number is 3389. we want to change with other port number. Thank you in advance.
opmanager AD widget dashboard
Hello, I had 2 windows dc's in opmanager (build 8812), there are windows 2003 VMs. All AD counters seems to be correctly polled (AD Store, Network, LSASS, LSASS process monitor, NTFRS, NTFRS process monitor, perf, etc ....) When I want to add "AD Services by availibility" widget on a dashboard, no data/no services are displayed ("Configure the parameters to display required data."). When I configure the widget, the field "Device Name" contains "...Select a Device..." and nothing else (I cannot see
Problem MIB of switch cisco 2960 & 3com 7700
Hi Guys, Good Afternoon, Anyone can help me? I have a cisco switch type 2960 and 3com 7700 and I want to monitor the temperature of the switch. However there is a problem, we can not monitor the temperature of the switch. Can you tell me about the cause of the problem and the solution to the problelm? Currently SNMP from the switch is already active and i have ask to principle about it, and the answer from principle said the causes is about MIB. I have search and download about MIB of cisco switch
Add new map image for business views
Hi I have been through this forum and understand that any new maps need to be .png or .jpg and all names need to be in lowercase. I also understand they need to be in ManageEngine\OpManager\images\maps. I have done this yet when I go into properties of existing business views, I still cannot see the map image. Any ideas what I am doing wrong?
Mibs for Nortel swtiches
Hi, I want to be able to monitor some information on our Nortel switches but I do not find any mibs for these switches. Where can I find mibs for: Nortel Business Policy Switch 2000 Nortel BayStack Switch 470-48T Nortel Ethernet Switch 470-24t Regards
Monitoring Dell Equalogic Storage temperature
Hello, How can I monitor my storage(Dell Equalogic) temperature ? The device was added and SNMP is working(test passed), so when I go add the monitor just show me Dell Power Edge Temperature and this monitor do not working. How can I do to add the correct monitor ?
Wrapper issues - OpManager will not start
From wrapper.log STATUS | wrapper | 2011/10/17 13:38:25 | --> Wrapper Started as Service STATUS | wrapper | 2011/10/17 13:38:26 | Launching a JVM... INFO | jvm 1 | 2011/10/17 13:38:28 | WARNING - Unable to load the Wrapper's native library 'wrapper.dll'. INFO | jvm 1 | 2011/10/17 13:38:28 | The file is located on the path at the following location but INFO | jvm 1 | 2011/10/17 13:38:28 | could not be loaded: INFO | jvm 1 | 2011/10/17 13:38:28 |
OPManager - Change Backup Directory
Hi, Is there a way to change the backup directory path of opmanager? I would like to change the directory back up on my other local disk.
Error parsing MIB:rlLinksysSmart.mib
Can someone please fix?
Exchange Monitoring Setup
I am trying to add Exchange monitoring to one of my exchange boxes. Once i select the exchange version (2010) it is asking for Public and Mailbox store locations. Does it want the path in drive format for that server. so e:\Exchange\ect.....? Also, How do i go back and add more mailbox stores if i just did 1 as a test?
Interface tab with no data
Hi. I just added a Catalyst switch with snmp v.3 configured. The cpu and memory monitors were set ok. But there's no interface at interface tab. I tried to rediscover them, but nothing happens. At Actions / Configure Ports menu, i see the interface list. All of them is there. But still nothing at interface tab. I went to the MIB browser and tried to get the information. It was list with sucess. Any help? I got 10 more switches to add, but i'll only do that if i can monitor all the interfaces. Thanks.
Opmanager 9
Hi, I would like to know when Opmanger V.9 will be release. Will it release before March 2012? Thanks, Jaa
Netflow Plugin No Longer Recognizes License
Since upgrading the netflow plugin from 8500 to 9000, it no longer recognizes our license and restricts us down to monitoring the default 2 interfaces.
Notification Message Translation
Does anyone know of a way to make the message in the alarm mean something? For example, instead of the message reading like this: Message: The Cisco Config Management Event trap is received from SMINETSW3.strategic.int.The trap details are as follows , .1.3.6.1.4.1.9.2.9.3.1.1.1.1: 5 , tcpConnState.192.168.77.22.23.192.168.77.31.4536: 0 , .1.3.6.1.4.1.9.2.6.1.1.5.192.168.77.22.23.192.168.77.31.4536: 201 , .1.3.6.1.4.1.9.2.6.1.1.1.192.168.77.22.23.192.168.77.31.4536: 0 , .1.3.6.1.4.1.9.2.6.1.1.2.192.168.77.22.23.192.168.77.31.4536:
OpManager 8811 Monitoring of ESXi 4.1 Hosts
Good afternoon, I have read various threads on this subject and haven't found anything conclusive as to how to fix my problem. I desperately need to be able to monitor our 6 ESX hosts, and despite SSH being enabled on the hosts I am still getting "503 Service Unavailable" when I try to connect to https://<esx host>//ui - if I connect to https://<esx host> I get the 'Welcome' page come up fine. I tried to get remote support via the normal support option last week but until now haven't heard anything
Daylight Saving changes not reflected in OpManager
On weekend there was a daylight saving change that moved time forward one hour in Sydney, Australia. The time showing in OpManager for 'real time' on all servers is displaying 1 hour behind. The time on all servers is correct. As a result scheduled downtime is not blocking alarms from server reboots and other alerts are being sent during the day but showing time of incident as one hour earlier . How can this be rectified? Version 8721. Thanks,
Rename a service monitor
We would like to rename some of our service monitors in OpManager. There is an old post about this, but it says to contact OpManager support for more information. The post is: https://forums.manageengine.com/topic/service-monitor-rename Is there a way we can get this information?
Help with custom SNMP monitor for 3G router's signal strength
We have some 3G routers from Digi that have their own MIBs. We would like to monitor the signal strength. The MIB provided (.1.3.6.1.4.1.332.11.6.3.3.1.4) gives us this as a result: "3 of 4 bars (-83 dBm)". I created a new device template, then created a new SNMP monitor using this OID. However no data gets collected. If I got to a specific devices page and do Test Monitor I do get a return for Monitor Value. I could understand difficulty with this being graphed as it is not a strict numerical value.
Real time traffic widget graph
Dear Team, I came across this unusual behavior on Real Time Traffic widget that displays interface traffic on my routers (in bps). The graph would sometimes show surge in traffic beyond my maximum bandwidth limit - sometimes it would show x200%. I am monitoring 8 interfaces and they would all show this behavior at the same period in time. Doing some investigation by going to each device's monitored interface in the interface's traffic report shows differently - no indication of the surge. How can
OPM don't show real values of CPU utilisation, memory utilisation etc...
Hello, I got a trouble with the free version of OPM all my monitored server shows CPU or memory values that are wrong (using WMI) and when i use SNMP sometime it didn't succed to connect the device sometime it succed but don't show the real values too. Best regards OPM User
Unmanage servers
Dear OpManager team. I have a pending task at my table. I have to update a lot of servers every day in different random times and right now we get alarms because the servers are down while it is updated and we cannot use downtime scheduler since we won’t know when it will be ready to be updated. I was wondering if it will be possible to unmanage servers by script before the servers goes into maintenance. Since opmanager does not support API it could be nice to update the value in the db or calling
Customized Report
Hi, Is it possible to create a customized report with the event history from all devices and notes from the last 24 hours? Regards Ralph
Customize Interface monitoring?
I would like to be able to generate an alarm when an interface goes active and the alarm clear when the interface is shutdown. I've not figured out how to reverse the "normal" alarm setting for interfaces, is this possible in OpManager? This is becoming a real problem as when combined with my escalation alarms, when I bring an interface up to test DR circuit and then shut it back down, it starts generating interface down alarms every 5 minutes (as it should for an interface that is not supposed
OpManager Crash wrapper log please help this keeps happening every one or two weeks
please see attachment as this keeps happening and is looking bad. Thanks, Stephen
Can't integrate to OpManger
I am using SDPLus 7.6 and OpManager 8 buid 8024. I want to integrate SDPlus but it is not accepting the SD Login. I am using LOCAL authentication in SD Plus. I've tried with "administrator" and the new password I set. I've also tried with another admin account I set up in SD Plus. Not sure where I'm going wrong.
Notification Profiles linked to a Business View
request to the developers: the Notification Profiles linked to a Business View. So that when a device is put into the business view automatically notification profiles can be linked to it. It would be nice.
Next Page