CPU Use Graph on non Win/Lin?
We're adding some OpenVMS Integrity servers to OpManager and would like the CPU and Memory graphs to work correctly - it seems though that the graphs only specifically work for Win/Lin/Cisco/3Com, etc. Is there a way/guide to set the graphs to look at a specific OID for these machines? They're correctly identified as type "DECSystem". The Disk Usage graph works correctly, as do all the CPU/Mem/Disk Performance Monitors (they give correct charts). Is this fairly simple to do?
Opmanager problem with WMI & Authentication
All of my WMI monitors fail with Device Name apps4-server.paulstra.com Monitor Name DiskUtilization Protocol WMI OID Disk Utilization Possible reasons 1. The device might be down. 2. The username and password provided for this device might be wrong. 3. The domain password for this device was not provided 4. The domain password for this device might be wrong ------ However RPC & WMI are running on the server, the username and password is specified with the domain admin account i.e. "paulstra_crc\administrator"
Opmanager time is not match system
Dear support, OpManager timing is dose not match system machine last nigth e.g System time 4:00 PM & Opmanager showing 5:00 AM aslo graphs are not show. kindly do needfull Regards, M. Furqan Akram GSM:+923018294812 Furqan.Akram@sc.com smfurqan@cyber.net.pk
WAN RTT Timers and Cisco ASR 9000
I am trying to figure out how to set up IPSLA WAN RTTs on the Cisco ASR 9000 platform using Opmanager. It seems that Opmanger is not sending the right command to the device after the creation of the SLA. On other IOS devices such as a cisco 7206 I have no issues setting up and publishing the SLA. I have setup a RW community and an access list on the ASR 9000 and I can see counts in the Access list but when I check the history section of All Monitors the error description is "Invalid input sent to
Getting postfix queue values from snmp
Hi all! I am trying to get snmp extend values about postfix queues. But, I dont know how to do that without the OID number... I am using variables names like NET-SNMP-EXTEND-MIB::nsExtendOutLine."postfixqueue".1 because I have written snmp extends scripts under /etc/snmp/ Is possible to do something like that? Thank you!
How to set Dials once Template is created
Dear Support, I have created Template for few devices, now I want to bring value dials, how can I do it? Waiting for reply, Regards, Dipak
demo.opmanager.com is not available
i'm checking out the demo for opmanager but it seems not working or extremely slow. Is this a malfunction or shutting down of demo?
URL Monitor monitors OpManager itself instead of site asked
Hi, One of my probe server, which was istalled as Italian, always had this problem. Basically the URL monitor query OpManager itself and not the URL i'm asking for. This problem went unnoticed until we had a system outage and tried to understand why the monitor stayed green. Pressing the "check now" button it show a page with a redirect to "/Login.do". That does not exist on target server. Appending "/Login.do" to the URL we get a page with "OpManager" in the title. Since the other probe, which is
WAN RTT Monitor with Cisco ASA5505
Hi All, I have a Cisco ASA 5505 already configured with SLA Monitoring as follows: # sh run sla mon sla monitor 10 type echo protocol ipIcmpEcho 192.168.0.1 interface outside num-packets 3 timeout 3000 threshold 3 frequency 10 sla monitor schedule 10 life forever start-time now It's working very good: # sh sla mon op Entry number: 10 Modification time: 16:36:36.320 CST Thu May 17 2012 Number of Octets Used by this Entry: 1480 Number of operations attempted: 77 Number of operations skipped: 0
Make Mib file compatible with OpManager
Hi, Could somebody please make the attached MIB file compatible with OpManager? It's for the Avaya Communication manager 5.2.1. I'm getting: ================== G3-AVAYA-MIB ================== CRT-82 All OBJECT IDENTIFIER values should have at least two sub-identifiers. lineNo colNo Error 33 5 Only a single sub-identifier 'com.adventnet.snmp.mibs.mibparser.NameNumber@b39932' is present in the OBJECT IDENTIFIER definition ----------------------------------------------------------- Thanks, Marcos
Build 9010 - Blank Dials for CPU, Memory and Network
Hello, Recently upgraded to 9010, the issue of blank dials continues to happen. Still unable to change a device from Virtual Device to Server. WMI connection works fine to test CPU utilization. History Reports pane shows all "NO DATA COLLECTED". Thanks.
Not Data
Your help is needed because we have problems with OpManager 9, as this when viewing data in devices down does not show us the history of each performance. We Performace Monitors configured in some devices as this are down we can not seethe history of each performance. Deputy imangen
How to use Wavecom M1306B Modem?
Hi support, I've bought a Wavecom M1306B Modem and installed it as a standard 56000 bps Modem on a Windows 2003 Server where Opmanager is installed. With Hyperterminal i can use AT commands to dial out and this is working fine. The modem is installed on COM1. If I go to the SMS server settings in Opmanager and enter the Port Number to COM1 I get a message stating Modem is not connected properly. Check your settings. What am I missing here? Please help. Regards, Juan
3COM- 5500 Series and HP 3100 Switches MIB?
Hi all can i get me the 3COM 5500 Series and HP 3100 Switches MIB file? - CPU / Memory and Temperature Thank you in advance.
Custom HDD Usage Dial Calculation
I have an active node cluster server, thus I would like to exclude the other SAN disks as it the dial will give wrong value when some disks removed/added (as the total disk space stored in "asset details") This server is running on Windows Server 2003. Monitoring is done via WMI. OpManager used is: License Type : Essential Build Number : 8722 I've checked the OID for the drives that I wanted to monitor which is Drive C & Drive E. C: (.1.3.6.1.2.1.25.2.3.1.6.1*100/.1.3.6.1.2.1.25.2.3.1.5.1) .1.3.6.1.2.1.25.2.3.1.6.1
Custom Tables
If I wanted to do a query on opmanager. This is what I want to look for. Listed below. device name with certain days and times and I want to look at utilization in and out of a perticular interface. Does anyone know what tables I would need to accomplish this if possible. for example. trying to do custom report for april 2 2012 to may1 times 7:00am to 18:00pm but I need this perticular time due to this is our production hours. Or if any has a script that can do this or what tables I could use to
Error # The RPC server is unavailable when adding performance monitor
Hi, We get the message Error # The RPC server is unavailable when we try to add a performance monitor on 1 server. It was working before since we have other performance monitors. When we test the credentials it gives the same error. The DCOM and RPC are working on the server, I was able to connect with wbemtest and do some queries. It is not the firts time it has done this on 2 separate installations of OpManager and the only way we found to correct this is to delete the device and add it again.
Planned maintenance window
I have tried to find such feature in the product but there seems to be nothing available. We may need to restart monitored servers at certain planned times and would not like to have all the alarm bells ringing at the same time. Is there something similar in the product that I have missed or is this feature planned for the future?
Keep Browser From Starting on Service Start
Is it possible to disable OpManager from starting a web browser instance when starting up its service?
Import CDR's
Hey guys, I'm trying to import CDR records using OpManager, but I don't see this option under VOIP Monitoring. I see that this is avaialbe in VQManager, but this is no longer supported. Thanks Steve
Build Business View from excel Spreadsheet
Hi guys, i need to build some business views which i have in excel format is it possible to import the list of devices into a view instead of doing them one by one Thanks, Stephen
DB RESTORATION in OpManager
Hi team, Initially I had Opmanager installed in a PC as server but now I bought another SERVER, I installed OpManager in the New server and wanted to transfer the DB to the new server, After Creating the Backup, burned in a CD and as i was trying to transfer to NEW server, I got the following challenges. First the Netflow plugin, which i installed but still says not installed then the other issues. Kindly assist [root@Opmanager Desktop]# chmod +x ManageEngine_OpManager_NetFlow_Plug-In_9000.bin
Mster/Central server alarms not cleared
Hi We use enterprise edition, and it seems that my alarms do not get cleared on the central server, even though it is cleared on the probe itself. I have tried restarting the central server and the probes, but no luck. Is there a way that I can clear/delete all "false" alarms on the central server? Regards
Graphs Not displayed
Hi, I had configured OpManager to show performance of my database server. I had configure it to show all the performance counters but it fails me to give performance readings(graphs) of CPU Utilization,Memory Utilization & Disk Utilization. I tried to troubleshoot but doesnot help. Pls. guide.
Workflow - Check switchport status
Hello, I am creating a workflow that tests network connectivity. One of the checks I need to perform is if a specific switchport interface is up or down. Is there a way to do that within the normal workflow options? Thanks
Unable to monitor MSSQL
Hi, I added WMI and SNMP monitors under Performance Monitors, I can see data and it works. But when I add a MSSQL monitor (Total size of DB), it failed - no data. I tried restart SNMP services, readd MSSQL monitors, relogin OpManager... still I can't get the MSSQL monitor data. I set the SNMP services as Read-only on both machine. Is there anything I miss out? Using OpManager 8 and Mic SQL Server 2005 on Win Server 2008. Thanks.
Scheduled reports to multiple recipients
Hi, I have installed OP Manager version 9101. I created scheduled reports and when I tried to put more than one e-mail addresses to recipients field (and separated them by comma), I had message "enter valid email ID". When I put just one address, everything went just fine. But how to configure several address to e-mail recipients?
Profiles for notifications
Is there any way to create notification profiles and assign them for servers based on SLA's? Meaning we have servers in 24/7 SLA so only one notification profile is created (for eg. 24/7) and then just assign it to all servers which belong to that. And also same for server which are in 8-17, etc. Now you have to configure that server by server.
opmanager does not display exchange dashboard?
i've installed opmanager build 8723 to check out the product before we purchase - it's supposed to display an exchange-oriented dashboard, but all i get is the normal dashboard. the server is running windows server 2003 and exchange server 2003 standard. i saw a post on here talking about application monitors... but i don't see anything like that in the device view or the admin panel...
No database is associated. Click here to associate the databases.
Hello! i have: 1) OpManager (build 8812) 2) Windows 2003 R2 SP2 x64 + MS SQL 2008 x64 I add MS SQL monitor. OpManager sees DEFAULT Instance ( DEFAULT instance of SQL Server health : OK. ) but does not see the DB - No database is associated. Click here to associate the databases. when I try to add a database system that does not see them how to fix this bug?
SENDING VALUES TO DEVICE OUTPUT CONTACT BY OPMANAGER
I have a poseidon3268, it has two output contact and 4 input dry contact, I wanna send 1 or 0 to the outputs according to some threshold violations on the monitored inputs. How can I do this with OpManager?
Opmanager 9 Failover - Secondary server service stops
Our Opmanager failover is working fine, but after failback the secondary servers Opmanager service is stopped. 1. Shutdown primary server 2. Alert is received that primary server is down 3. After about a minute the secondary server is accessible through http://server2:80 4. Turn primary server back on 5. Primary server takes over and is accessible at http;//server1:80 But then we receive an email that the secondary server is down. When I log into the secondary server the Opmanager service is stopped.
OpManager Change Colors to graphics performance
Gentlemen, It is possible to change the colors to graphics performance, for example when youperform a custom report report are plotted all the graphs of the performance and all have the green, OpManager has some way to indicate a specific color to eachperformance Claudio
Fix database after time shift
In our testing environment, we have shifted the time for the domain backward for some simulation testing. Unfortunately, OpManager has become confused and has stopped monitoring our servers. I tried to rediscover and test each monitor, and that worked for a little while yesterday - but today it's back to not monitoring. For example, today is May 16 2012. The last time OpManager thinks it monitored the servers was in August 2012. So, it's waiting until then (I think) before it monitors again. I would
User & Password against Microsoft Active Directory
Hi all, I've got something in mind.. how to configure the user and password against Microsoft Active Directory? So there will be a single sign in. We just need to put in or out a group or users in AD to have an access to OP. than the management or user and password would be much simple.. Thanks
SQL DB instances lose backslash
Just tried migrating my fully patched Opmanager backend database this morning from a SQL 2005 server to a SQL 2008 server. My DBA successfully backed up the database and restored to the new server. I ran the DBConfiguration.bat file and entered in the new connection info. My problem is the 2008 SQL servers use instances. I can enter the new connection info and the tool accepts the new server with instance without error. Unfortunately the service fails to start and the logs I find show attempts to
Opmanager syslog file
Hello, I'm running Opmanager with the NCM and Netflow addons. I've read a few posts saying that Opmanager doesn't store syslog entries. Having a historical record of all syslog messages is very useful for troubleshooting. Is there a way to make it dump all received syslog messages to a file? i.e. like a normal unix system. Thanks Brendan
integration of smsgateway with OpManager
Now, I am trying to integrate OpManger with sms gateway using gammu in term of alarm notification. But I am still confused how to integrate gammu with OpManager, how to integrate/send the alarm message using gammu? I need help to deal with it, please help. thank you.
SMS cut after 125 signs
Hi! I've updated OpManager to the newest HotFix 8722. Since the point of installation all SMS are cut after 125 signs and a second SMS containing the rest of the signs of the alarm is sent. Is this a known bug? Isn't it a bug and does exist a new setting in the Administration which I don't know? Hope for fast help. Kind regards, Mok
Layer2 Topology Map - just "Error!"
I am just learning OpManager 9101 evaluation 32-bit version (still waiting licence) under Linux 2.6.32-220.13.1.el6.i686, when I am clicking on "layer 2 topology map" tab under "maps" or "network", only a page displaying "error" is coming up. According to https://forums.manageengine.com/topic/error-msg-while-mapping-layer-2-topology-map I tried to connect database (..\OpManager\mysql\bin> ./mysql -u root -P 13306 OpManagerDB), but answer was ERROR 2002 (HY000): Can't connect to local MySQL server
Next Page