License question
Hi, Our customer is evaluating OpManger, User is going to purchasing essential license for 100 device, But I found the following message: This copy of add-on is to monitor 5 virtual hosts, the remaining 4 hosts will not be monitored using this add-on. Please contact support@opmanager.com to purchase an upgrade. Is this the restrict for evaluation only ? If there are total 10 hosts with 60 VMs. How much device license will it spend? Thanks.
Just started with OpManager and looking for Custom dashboard information
Hello, I have just started playing with OpManager and im not 100% sure of which terms to search for information on these forums yet. Ok, I found what I needed, and yes that was easy, but the main point still remains. Is there a link to a usable guide for what is possible with OpManager dashboards and widgets? One exampe of somethign easy but something I cant find would be is is possible to mask a server from a widget when I dont want that server to apear, unless its actually alarming. A good
Do you have device templates for Alcatel 6850 and Alcatel Omni9800
Hi, Our customer is evaluating OpManger, I need device templates above, do you have them ? Alcatel 6850 : .1.3.6.1.4.1.6486.800.1.1.2.1.3.1.2 Alcatel Omni9800 : .1.3.6.1.4.1.6486.800.1.1.2.1.8.1.2 Thanks.
Email alert formatting
Hi All I am in the process of evaluating Op Manager and I have a question that I hope someone will be able answer. We have a number of F5 3400 Load Balancers and I have loaded the MIB and added it to the .conf. I am trying to configure a monitor that will dedect a pool member going down using the following OID table ltmPoolMbrStatusPoolName.9.84.101.115.116.95.80.111.111.108.1.4.172.20.50.1.80:-->Test_Pool ltmPoolMbrStatusPoolName.9.84.101.115.116.95.80.111.111.108.1.4.172.20.50.2.80:-->Test_Pool
how to upgrade from mssql 2005 to mssql2008r2
if want to upgrade the database on OPmanager, before using ms sql2005 and now want to upgrade to ms sql 2008r2. how to upgrade the DB?
Oid Math Error
I have an issue with opmanager rounding values i am grabbing rPDU total load which needs to be divided by 10 to put in amps but opmanager drops the decimal value. 28/10 =2.8(.1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1)/10 =2 i need this fixed asap Thanks, Stephen
essential license query
Dear Team, We are purchasing opmanager essential license for 500 devices. In our environment we have around 20 esx servers, so do we have to purchase separate license to monitor esx servers or these esx are included in our 500 device license. Regards Abhishek
Uptime alarm?
Hello, been browsing the forum for a while and i couldn't find what i was looking for so here it goes: We would like to monitor the uptime and make it warn if a server haven't been rebooted after lets say 180 days. I've tried to set this up with a normal threashold and a notifcation profile but the sysuptime answers in second which leaves me with a long number of digits. And if i write in the calculated amount of time to try to make it warn after some time it doesn't alarm anyway. Any ideas on how
Change Router Health Graphs
Hello, Is it possible to change the graphs lists under the "Router Health - Today" tab? Is it also possible to add more tabs? Maybe a tab for Bandwidth, IP Pool count, etc. I found the opmanager_snapshotinfo.xml file. Is there an easier way to update or change this file? It would be nice if the tab was able to be custom created.
Min Monitoring Interval time
I'm using Opmanager 9. Is there a patch or other method that allows the monitoring interval for URL monitors to be less than 1 minute? I need finer resolution than 60 seconds in order to properly track a web service performance issue. Thanks, Frank
Monitoring MSSQL Instance
Hi, I have given my best and i couldn't figure out how to get MSSQL database monitored, here's the following steps i have done. 1. Add Server 2. Go to Performance Monitor 3. Go to MSSQL Tab 4. Select any options available from list 5. But as soon as i add it, it give me an option saying Select Database, but there's no database listed, i have 4 database available. Note: OpManager is able to monitor all other stuff like CPU Utilization, Memory Utilization and Disk Utilization could some one let me
Remove Disk Utilization Check?
I'm monitoring over 350 servers and have determined that I have no use for the Disk Utilization Check since I monitor and alarm on each individual disk. Is there a way to globally remove the Disk Utilization Check on all servers instead of having to do it on each one individually?
OpManager CPU Utilization always at 100%
OpManager shows the CPU utilization of many servers at 100%. When on the actual server they are much lower than that and it needs to be fixed. Thanks.
dell force 10 switch mibs
Hi there, I want dell force 10 switch mibs. Regards Abhishek
Fortigate monitors
I have created a new Device Template for Fortigate 310B and 3016B and created new monitors for the CPU Utilization .1.3.6.1.4.1.12356.101.4.1. 3.0 Memory Utilization .1.3.6.1.4.1.12356.101.4.1. 4.0 Active Connection Count .1.3.6.1.4.1.12356.1.10.0 I have tested the monitors and they are working fine and retrieving data however the gauges for CPU Utilization, Memory Utilization and Active Connection Count are not displaying anything. I have added to the opmanager_snapshot_dial.xml the bellow entries
Opman Tab error (9200)
Hi! I updated Opman from 9101 to 9200 yesterday and since then I am having problems on updating tabs for the interface. Infact there are no tabs there at all for any user including admin. Is there a way to restore the original tabs? When I try to put tabs there and save the applications prompts Error and nothing more. Do you have any suggestions on how to solve this problem? Best regards Andreas Karlsson
grep information serial number cisco router device using OpManager
Hii All Need guidence i have used OpManager to monitor devices like Router and switch. i want to grep information router serial number using Opmanager. i use SNMP protocol can i grep information router serial number using Opmanager ? thanks Didik P Adi
OpManager - Widget/Dashboard faults
Unable to see "core routers, switches, routers etc" in the Infrastructure snapshot on the Home, Overview dashboard. When i click edit It shows them in there but fails to display in the actual overview. Tried to add a new Widget and get the error "Error Type: LoadXLM, Description: Incorrect XML" when i click ok, the error goes away but i can't add any widgets.
Business View
I have recently upgraded to the latest version of OpManager and it seems to have effected my Business View. It is only a simple view with 3 locations, but the box is very big and messes up my dashboard view. Is there a way to change the size of the box? I have attached a picture to show what I mean. Thanks.
OpManager Service Pack Install error
Hi I have just installed SP 2.0.0 (9200) from 9101 and it installed correctly. Upon starting OpManager I am presented with the following screen (See attached). Can you please let me know how to fix this? Thanks.
Can you apply a Rule Engine to existing devices
Hi I have created a few rules using the Rule Engine, and it works nicely for new devices. For example I have created a new rule that adds a bunch of Windows service monitors to some of our servers. Now I would like to add those services to some of the existing devices. In stead of using the Quick Configuration Wizard to add the services one by one it would be nice to just apply the rule to my existing devices. Is that possible (Without deleting and readding the devices)?
Edit thresholds System Monitors
Is (and how) it possible to edit the system monitor thresholds under Active Directory Monitors. I want to adjust the thresholds but have to do this for each domaincontroller (35x) And is it possible to make multiple Windows 2008 device templates. The are multiple Windows 2008 servers with specs A en I have Windows 2008 servers with specs B. I want to set different thresholds for each device template. Thanks in advance for your reply....
Extra accounts in 9200?
Hi everyone, I recently upgraded my OpManager to the new 9.2 service pack that was released. While looking around at some of the features, I noticed that under the User Manager, we suddenly have three extra accounts that were created named "nadmin," "sadmin," and "vadmin." I assume the names are referencing different types of monitored equipment (network admin, system admin, and virtual admin, respectively), however this is not something that was set up by either me or my sysadmin - currently the
Getting the CPU dial to show custom monitor
Here is the problem I have The CPU Utilization monitor is incorrect in plotting the CPU for BIGip F5 1600 I Created a custom monitor which plots correctly How do I get the dashboard CPU dial to plot the custom monitor ? Thanks
support ESX5?
Hi, i want to monitor the CPU and Memory Utilization. can use SNMP to monitoring it? thanks, TS
OpManager Error 12029
Hi, We are using Opmanager to monitor WAN activity in real-time, and for that we set up a monitor in the communications department. The thing is, that after a while, Opmanager will start showing this error message: 12029: Unknown We have to clear that error window in order to keep seeing the real-time graphs, but since the browser is opened on a dedicated computer, directly connected to the monitor, this is not acceptable. Any ideas why this error happens? and more importantly how to fix
Printer Notifaction Question
We are doing an eval of OpManager and ran into this issue. We imported about 140 networked printers and we were going to setup a notification profile for them by using the wizard so we could do them all at the same time but it seems that option to trigger the notification "when any [selected] Print Monitor is down" is not available when trying to apply to multiple printers at once. It is available if you go into each printer and setup the notification there. Is this normal or a bug that can
Hyper-V Device Templates not working as expected
OpManager v9200 I have a 2008R2 Hyper-V Host with 8 Hyper-V VM's and when I add them to OpManager they get classified as 'virtual' devices but the VM's default to the VMWare Virtual Machine Device Template and the Hyper-V host gets both the Hyper-V Host Device Template AND the VMWare Host Device Template. When I try to apply the Hyper-V Virtual Machine Device Template there are no available hosts to select. I saved and then deleted the VMWare Device Templates, as they are not needed, and tried
Installing OpManager 9 with MS SQL database on an other server.
I want to install OpManager 9 using MS SQLserver on an external server. I have installed MS SQL 2008 R2 on Windows 2008 R2 and created an Named Instance NI01. In SQL Server Configuration Manager (Protocols for NI01) I have removed the value 0 for TCP Dynamic Ports, and used 1433 as TCP port. So dynamic ports are not used On an other Windows 2008 R2 server I want to install OpManager Central Server 9, but I'm getting an error after "Configure the SQL Server details": The error-message is: "Unable
Evaluating and comparing values based on OID using scripts
Hi everyone, I am looking for a way to evaluate and compare values (based on OID) using script monitors. Assume that I have a device (.1.2.3.4) which reports its expected state (.1.2.3.4.1) and current state (.1.2.3.4.2). I'd like to periodically evaluate the values of the two states and compare them to check whether the current state is expected (i.e. no problem). The way I am doing it is querying from the OpManager database in script. Is this the only way? Is there any better, easier, less flaky
log files
Our server is running low on disk space and the following path is taking up most room: C:\Program Files\AdventNet\ME\central\logs_archive Size - 21.4GB. all files in are text documents, and dated today (20/07/12) and yesterday (19/07/12) Does anyone know if it is safe to remove any of these files? thanks steve
monitoring port-channel/ether-channel
Hi, I have couple of ether-channel's configured in my core swicth for netapp F810. 2 ports on core 1 and 2 ports on core 2. but i cudnt see these under interfaces tab on both the switches. did rediscovery also with no luck? please advise. Thanks, Sridhar
Question with error! in network map
When I want to create the business view from networkmap feature, some times i get the error msg. (too short) error!.. What's error and how to fix its. ? Why I create the businees view from manual create businessw view, but I want to using the save as to business vieew because when created the business view (manual) I can't to see or set the icon of device as same the map form networkmap. Regards, Pareka
End-user overview
We are using OpManager and would like to also display a Dashboard for end-users. End-users normaly don't know what might be down when a specific server is down, so we would like to create a dashboard overview of "services" that we offer like Email, Intranet, etc. For example: The status of Intranet should be up when the Database servers, SharePoint Servers and AD servers are up. When one of these has issues, the whole service group should be reporting Critical. This way our end-users are able
Servicepack not compatible
tried to install de sevicepack AdventNet_ManageEngine_OpManager_9_0_SP-2_0_0.ppm an d get the message "the file that you have specified is not compatible with this product" . What can this be? My buildnumber is 8800 Latest version 9101
Update Multiple Device Notes
We need to update the Device Notes for a large number of systems. Is this possible within OpManager or can this be done through SQL?
OP Manager features not available using Linux Server
Hi OP Manager, I would like to ask the features of OP Manager that is not available / functioning if I use Linux as server. I've read some discussions that WMI and SMS Server Settings is not available on these scenario. We're planning to use Linux as server for OP Manager, your help is much appreciated. Thank you! Mark
Interface Status Change Monitoring and Alerting
It is typical for user access interfaces on our switches to go up and down mainly due to laptops users disconnecting from their desks. However, we still want to monitor the up/down status for if the interfaces go up or down too many times in a given period. It would be nice if this could be configured on the "Interface Properties" page where other thresholds are specified. It could then ask, "Alert if status is changed X times in X minutes". Possibly "X minutes" would have to be identified by "X
Monotor Hard Disk healthy
How can i monitor my scsi harddisk is running fine or faulty and get alert in HP server using Opsmanager
Syslog OpM
Please help with your configuration syslos, since at the time of generating a rule is has to be associated with an event, the problem is that the devices are an alarm, the idea is to have syslog configured not associated with any event. Please help or guide for the correct settings. Claudio Leiva
Next Page