I have 6 APC UPS with environmental sensors
i want to monitor the temperature and i need the OID value and i uploud the powernet.mib
Can Opmanager support regular expression on Event Log Rules ?
If the event log decsription contans string "aaa" or "bbb", On description field, i input "aaa|bbb", but didn't work. What should be input in description field ?
loss of connection to Sql Database
Hello Team ; Opmanager database is MSSQL .it is in different server with OpManager . As you see from stdout log file "connection to the Database is lost " error is visible. Do you know how to check connection loss errors in MSSQL .
Email Notification when miss 4 ICMP timeouts
I need to assigned email notification of all network devices that if device miss 4 consecutive timeouts so email notification can occur but i don't find the same in OP manager. Kindly advice. Regards, Arshad
Disk Usage Report
OP Manager 9 do not showing proper Disk Usage Report as showing "NA" in most columns in report. Reference snap shot is also attached for the same. BR, Arshad
How to monitor outbound and indound email
Hi How can i setup Opmanager to test sending and receiving email so that i can prove messages are flowing? I would like to test this every 15 minutes. Thanks Mike
Process Monitor for Reporting purpose only - no alert
Is there a possibility to use the process monitor only for reporting and not for alerting? I would like to monitor some user processes that are running on a citrix server to determine how much a process consumes, but I don't want a alert, if the process is not running. for example: I would like to know how much CPU and RAM Acrobat.exe is using over a certain time. But Acrobat.exe is not running all the time, so it should not generate a alert if it is not running. thanks
Cpu Util , Mem Util and Conns Cound Customize
I would like to know how I can customize the view that show cpu and memory utilization for each device category for example , I would like to show juniper and sonicwalls current connection count but both of them is on seperate oid's. How or where in the program do you customize those three output to show on the device dashboard ? I have tried to find it in the documentation , If I missed please just point to correct part of Documentaion.
How to define what is a WAN link?
I'm using Opmanager 8721 with the SLA license and need to know how to set an interface as "WAN link". I running the dashboard widget "WAN links by availability" for a specific business view that only has my WAN routers in it. My problem is that some of my WAN links are ethernet and these are not showing up in the report. It looks to be only pulling up the dialer and FR interfaces. Can I change an interface to be classes as a WAN interface? Thanks, Brendan
OppManager is not detecting CPU, Memory Utilization for some network devices while it detect all details regarding Ethernet ports for the same device
Dears, This is my first implementation for OppManager and I am kindly need your assistance. The customer have 3come switches and Fortigate firewall, my problem is that Oppmanger is not providing CPU, Memory utilization, etc.. while providing all details regarding their Ethernet ports for the same devices. Please find attached the snapshot and advice. Error for the below devices: FortiGate firewall 500a 3COM Switch 7758 core switch
Report memory e CPU
I'm using 99% of memory on my server. I would like to take a report to know that consuming more memory, it is possible? I want to know which application is consuming more memory. And to CPU also. Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
Notification is not sent to Gmail?
Hi there My name is Nibe. I have to set the Opmanager. Because it has the account of GoogleApps, but want to e-mail notification addressed to that account, send mail is not. If I want to know why so if teaching. Notification profile settings Destination: *****@gmail.com Source: test@gmail.com Mail server information Mail server name: smtp.gmail.com Port No.: 587 Sender e-mail address (optional): *****@gmail.com E-mail address: *****@gmail.com Authentication settings (optional) Username: *****@gmail.com
Adding Exchange monitoring to existing Virtual Server.
I have a virtual Exchange 2010 server that was not added explicitly as an Exchange server, but that I'm trying to add Exchange monitoring to after the fact. When attempting to add the Performance Monitor and then choose the Exchange monitors, it kicks me back to the server page with a vague error.. Please enter the UserName/Password details in the screen Can someone assist?
Downtime scheduler always running.
I have a downtime schedule that is always running. I can not find a way to stop it so that I can modify it. Seems to be stuck.
Linux with OPManager
Hi Guys, I have around 10 Linux servers (OpenSuse and SLE10/11), what do I need to make sure the OpManager talk the Linux Servers, thanks
Moving Devices From One Probe to Another
Morning, I am currently looking to migrate a number of devices from one of our OpManager Probes onto another one of our Probes as we are looking to decommission one of them. I was just wondering if there was an easy way to do so rather than manually re-entering the devices onto the other Prober (i.e. export data from SQL db and import data into other db)? Any help would be appreaciated. Thanks, Scott.
Error while opening OP manager
.\conf\ports.properties ( access is denied) content of the Ports.properties file #Tue Mar 19 09:05:33 GST 2013 NMS_BE_PORT=2000 WEBSERVER_PORT=8070 SERVER_HOST=0.0.0.0 TOMCAT_SHUTDOWNPORT=8005
Monitors Category missing based on Device Templates
Hi, In order to properly manage all my servers i have created 2 Server templates (Servers Dell and Servers HP) including standard monitoring (CPU, Memory, Disk Utilization, etc.) adding particular monitors for the vendor hardware. I just discovered that in the dashboard of these servers i'm missing some category of monitors: Windows Service Monitors; File Monitors; Folder Monitors; How can i add the Windows Service Monitors category so i can add the monitoring of specific services? Below are the
OPManager Server failed to start on Linux
Hi all, after i've sucessfully setup a new machine with Debian, i have also installed the Linux-version of opManager. After the sucessful installation i try to start the server using the shellscript (StartOpManagerServer.sh) After starting the services, the following error message occurs: Verifying connection with webserver ... Failed to establish connection with webserver. Gracefully shutting down OpManager. Trying to shutdown OpManager After that, all services are stopped Could someone tell me
Physical health monitoring on ESX4.1
Hello, I am monitoring an ESX4.1 installed on a HP proliant DL380 G5. I need to monitor things like power supply, temperature etc... As OpManager is based on native API, I don't need any agent installation on my ESX, do I? Even if OpManager doesn't use SNMP for ESX monitoring, can we use a MIB to get those informations? Thanks, Loïc
ESX / ESXi hardware health monitoring
Now that you guys have implemented ESX monitoring (great feature) I'd like to see ESX / ESXi hardware health monitoring as well. Is this possible? --Mikko--
monitoring mvware over vsphere
Hello I'm using the newest ver. of opmanager and have problem adding vsphere credentials. When I want to add vpshere host and monitor all devices managed by vpshere I do have error:VMWare vCenter is not supported. Please add ESX/ESXi host individually. Why this happening? Thanks Mark
Add Vcenter host
Hello, Running 8723. When will be able to just add a Vcenter server instead of all the ESX hosts one by one? Thanks.
OPmanager supporting VMWare monitoring via vCenter
Hello, When do you plan to release OPManger in order to support monitoring via vCenter? We are wainting on this new release as we must disable lockdown in our ESX farm. If we will not get it, Security will request to disable OPManager. Many thank for your quick answer. Regards Philippe
no windows credentials tab in oputils 6
in oputils 5 there was a tab called windows credential in order to resolve dns name abd system explorer via wmi. in oputils 6 this tab disappeared and replaced with active directory tab. in my case i don't have active directory in my network, is there any work around for this issue thank you in advance
[Feature request] Repeat notifications for unacknowledged alarms
I need a feature that will send email notifications every N (minutes/hours) until the alarm is acknowledged or cleared. My issue is that during unscheduled downtime, I receive so many notificatons from Opmanager that I usually miss one or two that does not say "Clear". This is usually for a single process or service, so it's easy to miss until users start complaining. I also have a few alarms that are acknowledged but not cleared, so I'd like to set up a separate schedule as a reminder if an acknowledged
Report memory and CPU
I'm using 99% of memory on my server. I would like to take a report to know that consuming more memory, it is possible? I want to know which application is consuming more memory. And to CPU also.
How to remove HyperV VM?
According to the documentation I should see a remove/delete action in the VM Snapshot page. I do not... How do I remove these "orphaned" machines? They were deleted/removed from the host server. Screenshot here https://skydrive.live.com/?cid=40421afb471988d1&id=40421AFB471988D1%21112&sff=1&authkey=!AJ9jFYwUL_79Nzw Running lastest build of OpMan Windows Server 2008 HyperV Server Thanks, Rob
Ignore individual alarms directly from the Alarms tab
When I turned on my Event Log notifications, I started recieving hundreds of random, non-important events (like printers disconnected or domain voting). So I started adding these events manually to your Event Log Rules and set them to "ignore". However, the amount of steps that are required to add 1 single event to "ignore" is unneccessarily complicated. I need to go to the server, find the event, get the event ID, warning level, type, and message, then create a new Rule and set it to "Ignore". Suggestion:
Need Assistance Adding Seed Core Device for Maps
Hello-- This is going to sound like a lame question, but I'm looking over the instructions for configuring a network topology map and I can't get past the 2nd step. Here are the instructions: From the OpManager dashboard, select Maps --> Network Maps link (mouse-over the Maps tab to see the links to all the maps). In the Networks Map, select Actions --> Settings menu to your right. You will find a combo-box to select the seed device. Select the core switch from the list. Select the topology layout
A monitor with same name already exists
Hi to all, I need to create a lot of custom monitors for icmp messages, UDP datagrams, etc. for all devices i'm monitoring. How can I obtain this behaviour? If I create a custom monitor for a device template, I can use it again only on same vendor templates. If I try to create same custom monitor on a different vendor template (not scalable approach) I obtain an error like this "A monitor with the same name already exists. Provide a different name". I'm using last OpManager 64bit version on Windows
Anyone able to monitor their rds web access url?
I can't seem to make it work. Always says the url is down. I tried credentials. Thanks
Opmanager starts but corrupts database, please help!
Hello! Recently I installed a fresh install of Opmanager 8 and updated it to v.8812. I added many devices and created maps, but after Windows Server 2008 updated a few things it restarted and Opmanager went haywire! It starts as a service, in web interface I get "Initializing Modules..." for a minute or so, and then a login screen appears. When I try to log in with correct credentials I get "Oops looks like a few tables got corrupted. Don't worry.. Run RepairDB.bat from bin directory and restart
Eventlog error exclude
Hello, I want to not see an warning and error from the event log, i have addes an rule to auto clear the alarms, but i think i am doing something wrong. I added the following, i added a new Rule: Rule Name : Perflib aspperf.dll Event ID : 2003 Source : Perflib Category : None User : Event Type: Error and warning enabled Description contains string : If incoming event matches criteria, alert with severity as, Clear the event --------------------------- After some time the error come back. This is
IP Address Management - VLAN IP address show up multiple times for every subnet
I am currently evaluating OPUtils and am falling in love with it. I used ADManager in the past and this is even better! However, I am running in to a small problem that I would like to get some feedback on. In IP Address Management I have found all of my subnets were discovered. That is great! When I go in and view the contents of the subnets I am finding many duplicate entries. While this is nothing more than an annoyance, I would still like to see them done away with. The specific example I currently
How to restrict or remove information from user's dashboard and Overview
We recently created a end user from admin account. We created the business view for this user and added only 1 device to this view, then linked to that user ("Only the selected Business Views" was selected) The problem at the moment is, the admin have plenty devices and lots of different network traffic monitoring graphic (widget) on the Overview page. Both admin and end user goes to "Overview" as default Home page after login, and both of them got those monitoring graphic (widget) showing there.
New Netbackup 7.1.0.3 installation : service is displayed down, but sevices is really running
Hi everybody, Since 1 month now we are updating our Symantec NetBackup Agent from v.6.5.3 to v7.1.0.3. And now ON EVERY UPDATED SERVERS netbackup client service is displayed down but service is running !!! when i choose to add a monitored service the service is shown in "green" and since i add this monitor to the server, after a while it raised an alarm for "windows service down" some informations : OpManager version 9011 (waiting the new AMS license to update to the last version) Does someone experience
Alarm widget size
Hi We have resently added Event log monitoring and the All alarms widget is now showing warnings for the event logs. My issue is now that the All alarms widget has expandet it's size on the monitoring homepage and are showing alot of text from the alarms. Is it posible to minimize the amount of alarm message text shown in the All alarms widget?
Removing Dashboards
Hi! Is it possible to remove some of the standard dashboards? I've even tried to like name my dashboards with a catalouge structure like: 1. Structure Map 2. Temprature Graphs 3. Temprature Instant But the problem here is dashboards like: WOIP Overview WAN RTT Overview Split up and make it really messy. Is it possible to deactivate or delete em? I got no WOIP or WAN stuff to control..
Having trouble with MIB on Centos 6
Guys, I am new to Linux and opmanager. My opmanager server is Windows 2008 server i am trying to monitor CPU/Disk utilization on Centos 6 server. I have snmpd service running on linux server. When i run "test monitor" on CPU utilization The Monitor did not respond to the test request 1. Check if SNMP is enabled on this device. 2. The SNMP request might have timed out 3. The OID may not have been implemented in the MIB. 4. The device might be down Any help would be appreciated. thanks.
Next Page