New to OpManager, Exchange questions.
There are two exchange servers but only one acts as the server, other is just redundant. Under Information Store Monitors >Active Connection Count and Active User count what exactly are these? These are showing numbers greater than the amount of employees we have, while the other one shows a very small amount.
Fortinet Firewall - CPU/Memory not showing
Hi, I'm running the latest version (10200) and everything was working fine until I updated my FortiGate firewall (I have a pair of 80C on HA) to the version v4.0,build0665,130514 (MR3 Patch 14) . After the update I can monitor everything but CPU and Memory. When I try to test the monitor, the popup window takes a while to load and give the following message: The Monitor did not respond to the test request Summary Device Name FWVNNY101 Monitor Name CPU Utilization Protocol SNMP OID .1.3.6.1.4.1.12356.1.8.0
Opmanager Won't Start (Java EXCEPTION_ACCESS_VIOLATION error?)
After a server reboot OpManager will no longer load up. The service is running on the server (Win2003) but nothing will come up via a web browser. A look at the wrapper.log indicate this may be a Java problem: INFO | jvm 1 | 2014/02/12 11:56:26 | # An unexpected error has been detected by Java Runtime Environment: INFO | jvm 1 | 2014/02/12 11:56:26 | # INFO | jvm 1 | 2014/02/12 11:56:26 | # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x4d0910be, pid=6528, tid=7780 INFO | jvm
Twitter Setup
Hi, Is the twitter alert still available on OpManager latest version? If yes, how do I configure it? Many thanks. Rita
Fortigate 300C device template with new performance monitors
Hello: I just installed the OpManager 10 on windows to test monitoring of a fortigate 300 C box. I created a new device template because the OIDs for the performance monitors on the Fortigate 300 or 300A templates did not match the correct OIDs to get the CPU, Memory and Session count info for the 300C box. Everything works fine, I can do the polls via SNMP, I receive the traps, etc., but a "cosmetic" issue happend. The dial graphs for CPU, Memory and Session Count said "No Data Available". I googled
Upgrade of OpUtils Plugin
I recently did an upgrade of OpManager to the latest version, but I cannot find any instructions on how to upgrade the OpUtils plugin. What is the process for doing so?? Thanks.
[URGENT] Problem on monitoring WMI
There are devices which stopped monitored. WMI credential is fine and CPU is monitored without problem. But other than that, Memory and HDD is not monitored. When I manually check the Performance monitor it works but not automatically every 15 minutes which is intended to. It reads the Memory and HDD only when I manually check. It used to work w/o problem but now most of... maybe all of the windows Memory and HDD WMI monitoring stopped. Also, When I delete the performance monitors of Memory and
SQL db connection issue
Can Opmanager send email/sms if Opmanager's process will lose its SQL db connection ? If yes, how to setup that ?
Cisco Catalyst Switches not reporting macs/ip's on All ports in switchport mapper
Greetings! My network infrastructure is set up in the following way: -pfSense Firewall (Router duties) --Cisco Catalyst 3560G-24 (Core L3 switch) ---Cisco Catalyst 3500-24 ---Cisco Catlayst 3550-24 ---Cisco Catalyst 3550-24 ---Cisco Catalyst 3560G-48 ---Cisco Catalyst 3560G-24 ---Cisco Catalyst 2950-24 --Cisco Catalyst 2950-24 ---Netgear ProSafe GS-108T (x10) All are configured with SNMP communities (RO & RW) and have been added to various tools in OpUtils including the switch port mapper. I am having
Problem with caracter when adding new equipement
Hello, I began to discover this tool there a few days. I installed the evaluation version of OpManager. I have a problem when adding new equipment (Switch Managed by snmp). The name of the interface found is not displayed correctly. example: ANA / ÂÑÈáÈÇÁÊ> AE do you have an explanation. Regards, Khaled
Modifying unavailability alarm messages
We are running OpManager 11.1 build #11100. We will be creating a custom dashboard to be displayed on a small section of a large screen for our Service Desk to view. We would like to be able to shorten some of the default unavailability alarm messages so that the alarms fit in the available screen space. e.g. shorten "Device not responding: Probably down or busy" to "Device not responding" shorten "Probable device failure: No response from device for last 3 polls" to "Probable device failure:" shorten
ManageEngine OpManager 11.1 - Now Available!
Dear All ManageEngine is glad to announce the availability of OpManager Build No 11100 for download and evaluation. Following features are the highlights of this release: CMDB Plug-in - The Plug-in helps you to get in-depth visibility of your assets present in your IT environment. This allows you to manage all your IT components based on their business criticality and make informed decisions Root Cause Analysis Add On - Enterprise IT departments need sophisticated monitoring for each aspect of their
IP Office SNMP/MIB - Basic Help
Hi, I am very new at this so hoping someone can help point me in the right direction. I am very slowely getting to grips with SNMP but I am struggling with MIB's which I am specifically trying to get to with with our Avaya IP Office 500. So far I have enabled SNMP on the IP Office (System Events, Configuration and ticked SNMP Enabled and put in the Read-Only Community name we are using and the standard SNMP Port as 161. Device ID, Contact and Location are currently blank) and beleive I have set
Amending the default Response Time (in ms) monitor
We are running OpManager 11.1 build #11100. I want to setup a response time alert to apply to all our routers which do not currently have SNMP enabled. Within each device snapshot it is possible to edit the following response time threshold settings: Monitor Name: Device SNMP OID: 2.2.1.16 I have added the same monitor to the device template using the add bulk monitor but as SNMP is not enabled this does not give me any output. In theory I could modify the above threshold on all 100 routers but I'd
MSSQL Monitor shows (100%) Logfile Used % for a mirrored database
We have a sql database server with a couple of databases. 1 of these databases is a mirrored database. When we monitor the mirrored database the "Logfile Used %" monitor shows a 100% full logfile on the failover partner. Is this 'by design' or is there something I can adjust in the settings?
OpManager not loading. Dead slow.
Hi. Was working fine till yesterday but today its dead slow. Page loads in 1 hr literally.
OpManager SSL Active Directory LDAP
Hi there, we have OpManager running over different network segments, and want to use AD integrated authentication. However, we cannot use SSL LDAP authentication to connect to probes on other segments and we cannot reduce the firewall security to allow plain LDAP. Any ideas? Andy
SNMP Monitoring
I am just curious to as if there is a setting to set or a default value for the SNMP community that opmanager listens on for snmp traps being sent to it. I know where to set the string for it to poll other devices and request/write data, but not how it listens.
Edit interface display name
Hi, Under device snapshot > Interfaces tab, the device Display Name is listed as the hardware detail (same as description - Broadcom..). - refer screenshot IFDescription.png. But I notice for all other devices, it is shown as "IF-Hostname" for display name. - refer screenshot IFHostname.png. Any reason why that particular device not able to populate display name as IF-Hostname? How can I edit it so that i can standardise it? Thanks.
Remote Access session Alert
Hello, Can I generate Alert In Opmanager Plus To notify me when Every Remote Access session Started On myLAN Regards, huthayfa
New UI
Hello Is the new version of OpManager with the new UI available and I'm just missing it? On the front page of the OpManager page http://www.manageengine.com/network-monitoring2/ All the screen shots of the product are with the new UI. Is it available or are these screen shots misleading?
change probe name ?
hi how change probe name in central ?
Device already present in System
OpManager build: 11100 Database: PostGres RemoveDBEntriesNew script not working java.lang.ClassNotFoundException: org.postgresql.Driver at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown
rest API list
Hello, I read the documentation and previous posts in this forum, but I didn't find a clear answer yet, I hope you can help me. Can you confirm whether OpManager Rest API is limited to this list of action: Add a Device Add a Device to Business View Delete a Device Display a Device on Google Map Add a Notification profile to a device Add an Event Add a Business View Add a User What about the API list described here : http://help.opmanager.com/#rest_api As you can imagine I am trying to fetch data
can't add the new interface at opmanager 11100
Hello! I use Opmanager 11100 If I want add new interface I go to tab "interfaces" and click "rediscovery" than I select new interface and click SAVE (look at http://clip2net.com/s/6HiP7u) after this I view: Interfaces added successfully. but the new interface not added :( and this process can be retry permanently (( Help me pls!
Root access to add ESX hosts?
Hi, Is root access required to add an ESX 4 host in Opmanager 9.x? Thanks.
OpManager REST API
Hello, I'm new to API's and trying to get a simple "GetMailServerSettings" query to work. I've done lots of searching, but can't seem to figure it out. Here's the HTTP GET query I'm using: "http://opmanserver:8060/api/GetMailServerSettings?apiKey=c3dd12f549f8afadsfaf2082bb5643d315" I have tried all sorts of variations... Can anybody help me build the correct string? Thank you, Max
SNMPV3 issue
Hi Can I activate an snmp v3 in cisco switch already activated to send snmp on nagios because i tested the snmp v3 and the opmanager display the cisco switch (2960 et 4000) as unknown Note that the OpManager OS Is Windows Server 2008 R2 Regards
RDP Logins / Sessions
Is there a way to setup OpsManager to alert on a max number of RDP sessions or logins on a Windows 2008 server? Thanks
Delegate Downtime Schedule Configuration to Operator?
Hi, How can i assign an Operator to have the permission to configure Downtime Schedule. I know AppManager has this feature already. Thanks
Stuck in the log in page after upgrading OP Manager to latest version
Hi Support, I've successfully upgraded our OP Manager from version 8721 to 11100.. I haven't had any problem with the upgrade but when I try to start and connect to the UI I'm stuck in the log in page. I check the wrapper logs (dbserver failed) please see below. STATUS | wrapper | 2014/01/15 11:03:27 | Launching a JVM... INFO | jvm 1 | 2014/01/15 11:03:30 | WrapperManager: Initializing... INFO | jvm 1 | 2014/01/15 11:03:35 | taryIconProps {DefaultMenuItem=Status, ApplicationName=OpManager,
Alarm
Hi how I configure a host to alarm when not are collecting information for CPU, memory, disk ...?
Opmanager & ServiceDesk Plus MSP Integration
Include official support for Opmanager to ServiceDesk Plus MSP integration. This functionality does already work but should be officially supported.
Cannot add device
We had a server that was in OpManager but it died and we had to rebuild it from a backup. This was also then removed from the opManager console. Now it is rebuilt I am trying to add it back into OpManager but it will not show. I search for the device but opManager cannot see it. I then click Add Device and it says it has added the device but I still cannot see it. Anyone had this problme before and if so how do I fis it? Thanks. Rob
Can I delay a alarm on a VM performance monitor?
Is there a way to get notified when a CPU exceeds 90% for a period of around 5 minutes rather then just immediately getting notified when it crosses the threshold using the VM performance monitors? With 400+ servers having it alert the moment it goes over is resulting in a constant stream of alerts. However, I do need to be alerted if a server is pegged at 100% for a period of time.
No Trap Parser defined for received trap
Dear I run OPM 10100 and it seems to run fine for months. I'm trying to add new Traps from a software on a defined device, but even if I load the MIB of the trap or I click "Create Trap processor" and just click ok, the traps are still in the Unsollicited trap. I tried to: - stop / start OPM - try snmp v1 and v2c/3 - delete mib / create trap processor from the Unsollicited trap button - delete/reimport the mib - create a DNS entry in the OPM Windows hosts file to be sure the hostname and IP matches
Mib Browser shows correct values but monitor doesn't
Hello, I am trying to monitor the number of Users per Radio interface on my Cisco 5508 WLC. I have found the correct OID and when I use the MIB Browser, I get the correct information: Here's a small sample output: bsnApIfNoOfUsers.88.188.39.18.206.0.0:-->3 bsnApIfNoOfUsers.88.188.39.18.206.0.1:-->8 bsnApIfNoOfUsers.88.188.39.18.215.240.0:-->1 bsnApIfNoOfUsers.88.188.39.18.215.240.1:-->2 But when I add a new monitor to the device template and test, I always get 0 for every instance. Am I doing something
Migrating OpManager
The server we have OpManager running on is about to go away, is there an easy way to migrate the setup to the new OpManager server? I messed around in the interface and I see there is a DB manager, but not sure if that is what I need. Any help would be appreciated. Thanks! TS
Need Details on the LDAP Bind Time Monitor
Hello-- We started trying to use the LDAP Bind Time monitor on one of our DCs so we can set a baseline and apply the same threshold to our other DCs. Can you give me some details on the proper way to setup the thresholds, and interval for this monitor? We don't want any more network chatter than is necessary. Thanks,
Physical Domain Controller has no WMI option
Hi, I have a physical Domain Controller that has the following Vendor : Microsoft Category: DomainController Type: HP ProLiant Servers and it has no option to add WMI. I tried to add it to the HP ProLiant Server type, but it has no option. Where can I add it. All my virtual Domain Controllers are fine. Best wishes Michael
Next Page