jsession in URL Sequence Monitoring
Do you know how to Monitor an URL Sequence when jsessionid is passed trought?
Error while trying to save Preventive Maintenance Tasks
After I save an existing PM Task I receive this message: �FAILURE :Error occured while trying to save Preventive Maintenance Task - Please report the problem to the system administrator, with the Error Code - 1.157.681.808.045.� For new one PM Tasks work fine.
Form Customizer Question
Hello, I had a question about the form customizer tab. If I wanted to create something along the lines of: *item return date* as a field they can set, but only want it to pop up if they select a certain Category, would there be any way to do this? Or is there any plan in the near future to implement an idea like this? I think this would be a good way to have the ability to track more things as well as a more simplistic setup when it comes to viewing the forms. Thank you for any response. Cory
custom report
hi i was wondering if someone could help, i need to compile a report that shows me all software that is prohibated, i need to show all software and the workstation that it is attached, i need to write a custom query so if anyone can help thanks ryan
Updation / modification of provided query
Hi, Could you please make some changes in the below provided query or give a new query according to my requirement:- select wo.WORKORDERID 'Request ID', TITLE 'Title', DATE_FORMAT(FROM_UNIXTIME(wo.CREATEDTIME/1000) ,'%d-%m-%Y %k:%i') 'Created Time', DATE_FORMAT(FROM_UNIXTIME(wo.COMPLETEDTIME/1000) ,'%d-%m-%Y %k:%i') 'Completed Time', MODENAME 'Mode', STATUSNAME 'Status', aau.FIRST_NAME 'Technician', DATE_FORMAT(FROM_UNIXTIME(woh.OPERATIONTIME/1000) ,'%d-%m-%Y %k:%i') 'Operation Time',woh.OPERATION,aau1.FIRST_NAME
SD+ Servers management
Hi, here in the company where I'm working, we are making the last appraisals before buy SD+. We have seen that it's very good as Helpdesk, Knoledgebase, Workstation management and it's good for other things. But, it isn't useful for Servers management. We need a sheet more detailed than the Workstation's one, we need to edit all fields by hand (some Workstation's fields seems to be filled only through a scan; for example the 'Build Info' field) and we need to upload files to the Server's sheet. It
Problem with fetching linux servers
Well, I recently acquired the full license SD+ and don't know how to scan Linux Servers, well, I've reading some topics about the need of telnet, but still some questions on the air, here it goes: Do I need a telnetd service running in each server ? If yes, after I've installed and runned the telned service how do scan the linux box ? My settings are as in the image attachment Please need to set it cause I have lot of linux boxes to inventory on! thanks, and sorry the english "ugly"
Problems with $RequestLink in Closed Request notification
In my template its $RequestLink ok as well but when the user click into the url in browser apears a http://localhost in front of the link what could this be ? "http://localhost/http:/srvhelpdesk:80/WorkOrder.do?woMode=viewWO&woID=7"
Errors with DomainScan with ServiceDesk Plus
Hi, when we try to scan all the clients in our domain only the client on which the applcation is intallaed and the domain server will be scanned. For the rest of the client comea a error message "�No response received from Workstation. Probably the workstation might be switched off or does not exist.� All the clients are switched on and are in the domain. Any idea?
A step in the wrong direction- or am I missing something?
We have just upgraded to OpManager 6 from 5.6 in the hope that the countless bugs might be resolved. I was horrified to find that MapMaker seems to have lost all its device management capabilities. It appears that it is no longer possible to add a device there, you must first do this in the web client. The map maker still has the fault that it says there is a link between devices when none is shown, and still shows strange bits of links in the top left of the window when the business view is seen
Real-Time Live Reports
hi support, are the reports generated by the firewall analyzer real-time? the reports that im getting are not changing (the graphs/data) even if i do something at the client's machine connected in the firewall. i only see the graphs/data change if i restart the firewall analyzer. please advise. thanks
Generic logon or password request page
We have a lot of users who forget there logins and passwords and we have them log a reset request on are helpdesk. We want to move to this program but we need users to be able to request a password reset without a login. Or maybe a page that is just for this task with a text field for there mobile number so we can SMS them there password. Can Anyone help?
Customizing Notifications
Hi Guys, Do any of you know if we can insert an HTML footer with our company logo into the notifications? Thanks! Gerhard
ICON image truble with 6.0 webinterface
My pre opmanger 6.0 unit icon's on webinterface looks like old times images, my new created unit dont look like the old ones they have only a green spot not a router image what is wrong ? on the mapmaker the look OK.
duplicate requests after exchange crash
After having our exchange server crash, we moved exchange to a new server. After moving the databases over, we had to run the microsoft tools to verify the integrity of and defrag and compress the databases. We bought the server up with reasonable success. After this, any helpdesk tickets submitted by users via outlook are resent to the servicedesk every minute and with a different ticket number each time. Same goes for any verification emails to who sent the request. Tickets submitted via the web
Clearing out "Test" data
I'm currently evaluating the system for 30 days. So far so good. My question is this. Can all of the test data that I'm putting into the system be removed leaving only certain information like vendors, products, assets, etc. How easy is it to "clean up" the system after testing?
Inventory
Dear Sir, Please advice me where to add the inventory under the requestor or customer. Thanks & Rgds. Anjali
Feature Request
We are using the Category-Selection within several Reports for our invoicing and our general it-controls (you know - sox). Our Technicians are instructed to change the Category to a appropriate Entry in the List after assigning. But sometimes they miss to set the right entry and the Workorder is processed in Category 'General Requests'. Maybe you can change the Category to a mandatory field where the technician must change if the standard category 'General Request' is choosen by the business rules.
Ability to Sort by Configuration.
I would like to be able to generate reports that sort computers by CPU, Hard Drive, RAM, etc. For example, what if my company establishes a policy that all computers under 1.5 GHz are to be replaced with new computers? At this point, at least as far as I have been able to figure out, there isn't an easy way to generate such a report from within ServiceDesk Plus. David.
Problem installing and starting.
After installing this software I cannot get it to run at all. So I searched the forums and did the run.bat command. It gives me an error plus use Mysql greater than 4.1.x.x Press any button to continue. I tried to reinstall and said the same thing. I also tried to upgrade the mysql that comes with it and still same error. Also these other titles are not working either NetFlow OpManager WiFi Manager EventLog Analyzer These titles work fine. Application Manager 6 OpsUtils So not sure what the issue
Technician Communication within ServiceDesk
We would like to see that when tickets are closed and updates are made to those tickets (ie assignment to Technician even though the ticket is already closed) that no communication is sent to the technician. There are sometimes a need to go back and QA our tickets whereby some fields have the wrong information. We don't want this information to be sent again to the technician if the issue is closed. I believe this was not a problem prior to build 5501 however it seems to be now the case. We would
Requirements
I would like to know where we are at with the following feature requests. I've also sent an email to Arun. I need to implement this one ASAP: We have 5 sites. We MUST be able to route by location and MUST be able to import the Office field from AD for location. The workaround I've found in the forums, route by department won't work. We imported all our users from Active directory and it does not import the location with the department. Editing every user in the requesters list to include a special
Can't Remove Lease Date
Hello everyone, I found an interesting problem in Assets. When you assign a lease date to an assest, you can change it, you can't remove it. Even if you uncheck the option for "item is leased" Is there any way to do so? For example, we have software where were given a temporary key, that was leased. Now we have the real software but the key hasn't changed. I hope this explains everything. Thanks! Eric
Feature Request (Create User)
Hi! Is there a way or in some roadmap to create a new user with let's say activate this user a certain date. Best regards, Thomas
MS Radius
i'm running FW analyzer Build Version : 4.0.1 Build Number : 4012 to analyze a PIX firewall logs,my problem is that Microsoft Radius report show me nothing.
Category Not Shown in Enter Resolution View
When we are entering a resolution to a request I have found that the Category is not shown in the resolution or history tab, the category has been completed in the request view but no data is shown in the resolution or history view (as below). Request tab shows: Request ID: Data Shown Category : Data Shown Group : Data Shown Resolution tab Shows Request ID: Data Shown Category : BLANK Group : Data Shown History tab Shows Request ID: Data Shown Category : BLANK Group : Data Shown Any Ideas? Thanks
stop the clock
Ever since upgrading to the latest version of Service desk plus this week, the 'Stop Timer' function is no longer available??? Is there a fix for this??? thanks PEte
request form customiser
Just wondering if it is possible when you add extra fields in the form that you could choose where in the form it would be placed at the moment any extra fields get added to the area under Task Details Would be good considering that you have a choice of where to add the fields I have a couple of fields that I want to add to the top part of the form under Request Details
SMS Server issue
Hi, I have a problem with OP Manager SMS server. I have installed service pack 1 to OP manager 6.0 I have a Wavecom m1306b GSM modem connected to server. I have tried to send a SMS with a local application and it works. I am running OP Manager in a Windows 2003 Server. When I try to configure the SMS server in /Admin/SMS Server Settings/, I obtain the screen attached in SMS_server.jpg file. Thanks.
Printing Question
Is there a way, or will there be a way in V5 to print out a page with all a technicians open requests? This is a feature we have been looking for for some time now. Thanks!
impar
On having sent the mail to the technician he(she) says that one could not have sent
Issue Manager integration?
Any plans to be able to integrate Issue manager and SD+?
blocked port reports
hi, is the firewall analyzer capable of generating report regarding the number of ports blocked? what are the ports blocked, the source of who is "attacking" the ports, etc. thanks
Database Conversion
Hello, My organization is interested in using our existing free-level database with another AdventNet product (SupportCenter). Is there a tool to convert or redeploy an existing customer database between products?
Form leabel change
i tried changing the labels of the SD+ to arabic but got so problems with the font. :?:
Removing Purchased Licenses
I am presently trialing this software and it seems superb, but I have accidently added to many purchased licenses to the system and wish to remove some. IE I have added 100 and it should be 70. Can this be done.
Spelling Error
Hie there..i was going through your software and when i'm trying the report, i saw one spelling mistakea under asset. Which are "Warranty Expity Date" and "Expity Date". Hope you guys can fix it. :-)
Search Solutions returns error
Hi, A few days we have problems with the search solutions function within SD+ 5.5 Every time we want to search for a topic we get the following message: FAILURE : Unable to search the solutions. Please report the problem to the system administrator, with the Error Code - 1.158.822.339.876. Does anyone know how to solve this? Thanks
Cannot register
I tried to register myself to this forum but is unable to do so. Gave me the following error "You have exceeded the number of registration attempts for this session. Please try again later." Can someone tell me what's wrong?
Unable to see notes in Purchase Orders
When I approve a PO, I can enter some notes but these are not viewable from the Purchase order detail form. How can I view these notes? Thnks
Next Page