Cannot edit or delete a "Target computer(s) domain)"
How can I edit or delete a "Target computer(s) domain)", i can only find the option "Add Domain" in Desktop Central, OS Deployment, Deployment templates?
Cannot deploy an image to a Dell XPS 15 (9560)
I am having trouble deploying an image to an XPS 15 9560 BIOS 1.2.4 HDD: m.2 PCIe SSD-0 Using OS Deployer 5.0.3.136 I was able to successfully create an image from the laptop, but when I deployed the same image back to it using the bootable USB and running the agent, it blew away all of the partitions and volumes and the machine was unable to boot to a hard drive. Options used for deployment task: Set to deploy to default disk Set to erase target disk data and occupy disk space entirely I have since
installing hp Pobook 650 G3
Hello, We are uploading an image with os deployer (latest version) on the new HP Probook 650 G3 but we cannot see the nvme hard drive and the onboard nic. is there an easy way to fix this ? Thanks very much
Unable to Deploy Image on Lenovo X230 Laptop
Hello Team, We recently upgraded our OSD server in to 5.0.3, 136, But unfortunately we are unable to deploy image on Lenovo X 230 laptop, also some X series laptop. Its just start & failed appeared in deployment task. Kindly suggest to narrow down this issue.
Resizing is unavailable.
I am unable to deploy a Windows 10 image with three partitions, in 5.0.3,124 I receive this error: Host '10.16.102.64' has failed the deployment. Additional info: -------------------- Error code: 1 Module: 52 LineInfo: 6934824D6BD2F69E Fields: $module : "osd_server_vs_3124" Message: Host '10.16.102.64' has failed the deployment. -------------------- Error code: 15 Module: 51 LineInfo: E3394061D0E3A517 Fields: $module : "osd_server_vs_3124" Message: Failed to assign volume '2'. --------------------
NIC drivers problems
Dear, I'm trying to deploy a image to a Dell Optilplex 7040. Osdeploy doesn't recognize the nic driver. Please advise on how to continue. Can i put the drivers somewhere on the server or is there a other possibility?
PE Builder USB drive corrupt
When I use PE Builder to make a USB bootable drive for the OS Deployer Agent, it loads up DISM and Diskpart as part of its processes, and seems to successfully copy files, but the resulting drive is not formatted, it appears as RAW and is not bootable. This happened on two different machines, both with the Microsoft PE toolkits installed and working. Partitioning/formatting the disks before building the PE makes no difference. I am able to create .iso files using the same buolder with no problems.
unable to deploy image
I installed the Os Deployer software on a server which went fine. I have managed to create an image from a computer. When I want to deploy that image on a new hard drive to a similar computer it will not work. I can boot the computer via PXE boot and boot into the deployer agent but then it gets troublesome, I get the following errors Bericht - 1 (0x340001) : host 'ip adress' failed to deploy - 13 (0x33000D) : operation was cancelled - 3,407,876 (0x740004) : specified session id not found - 0 (0x640000)
Client not responding after deploy
Have tried multiple desktops and the scenario is always the same. Boot desktop up to osdeployer agent> Osdeployer sees this machine as being online > Deploy image to the machine > Shows about 4% completion and then fails. error log: Client 'x.x.x.x' is not responding error code: 1 module: 52 we are running osdeployer 4.0.2
Problem deploying image in Os Deploy 4
I just upgrade my osdeploy 3 to 4. After the upgrade i tried a deploy of a workstation (Dell Optiplex 7010). It fails directly. Same Image as the one I used in the 3. Also same machine that has succeeded with Osdeploy3 .I have also included the log file. please advise Kind Regards Tim Verduyn
No mouse or keyboard in Hyper-V with OS Deployer
I am trying to capture an image of a VM in Hyper-V, but when the "Master Image Creation Wizard" starts the mouse and keyboard do not respond and I cannot start the wizard. I think it might be driver issue, but I don't know how to fix it. Can anyone assist?
OSD: Error E0064001C: Unsupported Protocol
The rest of the error is: Deployment server is not installed on this host or it has a different version. Occurs when trying to deploy an image. We have already successfully created an image (Windows XP) and deployed it; this is a second image (Windows 7 Pro) successfully created but not successfully deployed.
Windows 7 not joining domain
We have tried everything, checked credentials etc but our image will not join the Domain. It has been taken from a Workgroup based machine. If we join it manually after the process it works fine using the same credentials in the OS Deployer settings. Any ideas?
Software install
Installing software exe is telling me requires elevation. I already said run as a domain admin
WOL Problem
I tried deploying image through the network using the bootable media and it was working perfectly. Now I’m trying to deploy the OS using the WOL method. Unfortunately I’m facing problem, when the machine is booted and when the machine is trying to connect to get an IP and connect to the server, it will be stuck and restart the machine. I should go to client and set the server IP and sub mask then only it will connect, otherwise it will not be identified to the server. Can you please advice why I
Error 00070004 !!!
Can someone help me with this error please. I'm trying to create an image through the network but unforunatly i'm geting the following error: E00070004: failed to write data to the archive file. A possible reason might be poor media quality. Please advice. Regards,