How do I setup event monitoring?
Hi, I need a tutorial on how to set up event monitoring on a remote computer running Windows XP. Basically, I'd like to phrase the contents of an Event description, and if certain critiria matches, it will then alert me by email. Any advise on how to accomplish this would be greatly appreciated. Simon
Unable to delete objects?
I just ugpraded to the latest hotfix. I am unable to now delete any objects. Here is a sample entry from the logs.. 09:31:49:709 AM com.adventnet.nms.store.NmsStorageException: You can't specify target table 'managedobject' for update in FROM clause 09:31:49:709 AM at com.adventnet.management.transaction.ConnectionPool.executeUpdate(ConnectionPool.java:1791) 09:31:49:709 AM at com.adventnet.nms.store.relational.RelationalAPI.executeUpdate(RelationalAPI.java:638) 09:31:49:709 AM at com.adventnet.nms.topodb.BulkOperationsHandler.executeDeletion(BulkOperationsHandler.java:933)
Change OpManager Layout?
Is there a way to change the actual layout of the snapshot page for each device or for a specific type of device? Also, can you replace the graphs for cpu/memory/disc utilization with custom graphs from our own mib?
strange port on our managed Switch
hi, OpManager is running and successfully managed all the device that we wish to monitor in our network, but the strange thing is that with our 3com switch. our 3com switch only has 24 ports on it but we're wondering why in OpManager, it shows 30 and more switch. is there any explanation why this things happened and how to configure the OpManager in order to monitor the right port of this switch. Thanks!
Problem in running Op Manager in Windows
It's my first time downloading Op manager, but after installing it I can't run it, even I have no idea how to start it. When I run Op manager web client it shows web page which says: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, admin@india.adventnet.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information
Availability
I have 2 servers that are showing as down in Today's availability. It has been showing this for the past few days. These servers are not down. The Memory, CPU, and Disk Utilization gauges seem to be functioning correctly, but the availability does not. What do I need to do to corrct this.
Problem with Email notifications
I have 2 problems with email notifications. 1. They were working but they have stopped. 2. Can these notifications be sent to multiple addresses, if so how?
Polling retry, reports
1. Is there is global option to change the number of polling retries before sending out the error in the OpManager. I know that this is there in Applications Manager. 2. Can I configure/customize to add more items in the reports ie., currently it lets me add only devices for reports... can I add service monitors too? Thanks.
DCOM errors and server status down?
Hi, When the OpManager server is trying to contact clients that aren't available, I get a DCOM error from the OpManager server and this flags the server to be "problem". Is there any way around this? I think the DCOM is for WMI access. Thanks, Simon
No firewall bandwidth graphs since upgrade to 6.0
Hi, Since upgrading to 6.0, I don't get any bandwidth graphs for my PIX firewalls any more. The bytecounts seem to be collected, I just get a blank page when I try to view the graphs. If I view the source, all that's there are some <map></map> tags containing <area> tags. There's nothing else. thanks, alec
DNS Check
We have two servers defined that run djbdns (tinydns). When we defined them OpManager does not "see" the DNS service. Is OpManager looking for DNS on the TCP port instead of the UDP port?
Trap Receiver
Is there a way to save the trap data to an SQL database? Great Product! Thanks.
IP Address ,mac address scanning in the LAN.
IP Address scanning with mac address in the LAN.With the range of ip address given,the tool should give info about ip address assigned pc name as well as corresponding mac address of individual pc or other manageable devices.
Cisco Content Switch
Not sure were this question is to go, but Is there support for Cisco Content Switch? Is there future plans to include this if they are not already?
Showing link between switch port and device
When a end user device is powered down, OpManager generates an alert showing the port on a managed switch as down, but does not report the end device. Is there any way of show both? Is there a way of connecting the two togetter?
Monitor several subnet
Hi, I would like to allow another team to monitor their in our group data center. Those server are locate in several subnet. Is it possible to do it? I know it can use "business view" but I don't want to do it one by one. Because they have many servers locate in several subnet. Pls help. Sam.
view cpu utilization multi-processor
the view CPU utilization OPMANAGER is not the same with use Windows Task Manager
Network Interfaces greyed (Linux Server)
We have a Linux Server that has 2 physical Network interfaces. One of them is greyed (with a black diagonal slash). How can we enable the monitoring of this interface? The other network interface is monitored perfectly. Thanks, Saymen
Working hours monitoring
How do I set specific devices to be monitored only during working hours ?
CPU Usage (5 mins avg)
Hi, this Cisco Resource Monitor releases "Error!" when i click in the Admin tab\Monitors\Resource Monitors\Cisco Monitors. Also, in the Switches Snapshot this Monitor appears with a Threshold defined, and i never configured this. Thanks for your help. Miquel
Event log rules
Hi, We are currently testing the event log functions, but apparently they are not working, i tested it by stopping the automatic update service in windows, and configured the corresponding event log rule in OpManager, event id, source etc. I have also included a notification rule which triggers an email action. I started and stopped the Automatic Update service a few times now, but no email alarm from OpManager. Any idea's?
Antivirus Monitoring
Hi, I'm having some problem finding a solution how to keep track of the pattern version of my servers using Opmanager. I'm using Symantec Antivirus Corp. edt. and have configured the AMS service to send SNMP traps to the probe. but all I can do with the Trap Prossesor is set an status for the event (Warning, failed, clear, etc.) The function I want's are like a tag/String that the snmp trap can update. So I can easily se the time of the last "Update pattern" Trap i received from the AMS service for
Monitoring virtual memory
Can OpManager monitor virtual memory? If so, how would I go about setting this option up? THanks
Error Parsing MIB
Hello, Getting this error: Error parsing MIB:NaiComplete.mib Trying to load the McAfee MIB file. Thanks in advance, Rick Chandler
Schedule reports problem
Hi, I'm testing OpManager 6 , i like it ! but when i schedule a report , it works but no mail notification is sent to the email address indicated. The mail server parameters are good, and i receive alerts from normals events. thank's :?
OpManager upgrade
Hi TherennI have just done an upgrade of our OpManager to latest version.nnAfter the upgrade it just stopped working and I have not been able to get it working at all.nnOur copy has been previously upgraded from Version 5 to 5.5 and then to 5.6 beforehand.nnIn the wrapper.log the Error "Failed to Establish connection to Web Server. Gracefully shutting down OpManager"nnWhat files should I look in to dig into this deeper?nnCheersnnA.
No Standard Reports available at all.
Hello, I have Opmanager 6.0 with the latest hotfixes and the standard rerports are showing "No Data" I can run custom reports and all is fine, all my devices have blue stars on them. This is on a standalone OpManager machine after the problems I had running OpManager on a machine with another MySQL application. Any ideas? Thanks, Adrian.
Linux admin client / business views?
Hello, We'd like to setup business views for OpManager. From what I've read, we need the Admin Client to do that. The problem is we don't have all the rpm's loaded on our Linux box and we don't have don't have any x-client software. Is there any other way to configure the business views? Can we install a windows client/server and somehow connect to the Linux box? We have lots of PC's that we could do that on. Thanks, Frank
OpManager Server will not start in Fedora 3
Every time is try to start the server I get this error. "Failed to establish connection with web server. Gracefully shutting down OpManager." Then every thing starts to shutdown. I am running Fedora 3 and the latest version of opmanager. Corey
unmanaged devices turn back on?
no other administrator turns my devices back to 'manage' but yet every wed they seem to reenable? (rediscovery is turned off for these devices)
Removing OpManager 6.0
HI, I installed OpManager 6.0 on my windows 2003 enterprise machine and then uninstalled it. Now when I install 5.6, it installs successfully but at the end error come �Unable to start OpManager as a service� . In services Manage OpManager service is in automatic and started state. When I try to run OpManager client, it says �check if server is running�. I believe that version 6 is not uninstalled completely and it has still occupied the system, because when I again tried to install 6 it installed
AD Store on primary DC missing info and speedometer
As shown in the following screenshots my secondary DC has the requested info and speedometer shown while the promary DC does not have all the requested info. Both use the same admin account in domain\username format. Both have ntds.dit files on the "C" drive. I've done refreshes/rediscovers several times and the AD dashboard has been installed for 2 days now. Any idea why the N/A under used disk space and the lack of the speedometer? chris
Free Edition + Windows monitors
I installed the free edition (Linux) accidently selecting the trial period version. When the 30 days is up will this revert to the Free Edition, or do I have to re-install? Second, I remember a few versions ago the option to use Windows WMI, as well as to monitor Windows services (RPC, Print Spooler, SNMP, etc..) but I no longer see this option. I remember there was the ability for Opmanager to query the server and then I could select which services to monitor. Has this been removed or do I need
Disk Utilization
Hello, Disk Utilization isn't reporting the correct number. For example, the SNMP graph for one server is showing 100% full, but is really 80% (85% using df). HOST-RESOURCES-MIB::hrStorageUsed.1 = INTEGER: 7616694 HOST-RESOURCES-MIB::hrStorageSize.1 = INTEGER: 9495641 7616694/9495641=80% Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda1 37982564 30470428 5582732 85% /
Migration from WUG
I am trying to migrate from WUG and I have a number of SNMP Monitors. When I copy the OID frmo teh Services.inf file into the custom services and assign to a map the service does not get the desired result. I use the WSTC informant MIB Is there a easier way to migrate the OIDs and how can I set up a VEndor specific monitor using WSTC informant?
Customize Infrastructure Views and change device type
I'd like to find out if it's possible to customize the Infrastructure Views to remove certain links such as Firewalls, UPS, and add my own links? Also, for device type, I'd like to create different icons for different desktops such as MCE2005, Tablet2005, rather than grouping everything into Windows XP. I did create icons and added new device types, however, they fail when I try to enable WMI monitoring until I change the type back to Windows XP. Any help would be much appreciated.
Mass deleting monitors
Hello, The Quick Configuration Wizard allows me to add monitors to multiple servers (although only one at a time), however I can't find out how to delete monitors from multiple servers. I have a resource monitor that I want to delete from a few hundred servers. Any ideas?
starting problem in Opmanager installed in Redhat AS 4
Guys I already installed and used the opmanager on my FC4 but I want it on my AS 4 I try to start the StartOpmanagerServer.sh and got this error, try kevins suggestion about the libs.so something and change the port no of mysql but still got this error inside addon check Unable to start Mysql daemon Unable to create database Exiting OpManager so what will I do to solve this problem.. thank guys
Custom OID not working
If I specify a formula in a custom monitor, such as... (.1.3.6.1.4.1.1234.1.40.1.4)/6000 The monitor doesn't work. Note that this is on a table OID, which works without the formula.
Issue in Applying License
Dear All, There was an issue in checking the product expiry date for registered users. As a result, registered users who are using OpUtils 3.2 would be asked to upgrade again when they re-login to OpUtils. This issue has been fixed and the patch for the same can be downloaded from: http://bonitas.adventnet.com/netutils/18Mar2006/ManageEngine_OpUtils_3_2_SP-2_4.ppm Steps to Install the Patch 1. Stop OpUtils. 2. Execute the UpdateManager.bat/sh located in <OpUtils_Install_Dir>/AdventNet/ME/OpUtils/Application/bin
Next Page