wan rtt monitor source interface
Hi In my network I use vrf. I would like to configure wan rtt in one particular vrf on my cisco router I configure it using source ip address (and destination) in that vrf Next I add "vrf vrf_name" command on my router I test it using show ip sla statistics and it works fine But OPManager don't monitor it. It is strange thing. When I go to path detail it shows me address of my loopback instead of address of subinterface in vrf that I configured previously. I am using OPManager version 8810
Opmanager cant aware of the service is restarted
Hello, We're monitoring a windows based service named X with opmanager. When this X service fails it restarts itself in 6 seconds just because it's a live service and it's supposed to restart it self very quickly. However sometimes even the service fails opmanager cant alert it fails because it restart too quickly. We really need a solution regarding to this as we cant know if the service is restarted or not within day. Regards.
OpManager 12.200 (Upgrade from 10.250)
We recently upgraded our instance from 10.250 to the latest 12.200 - it's a great improvement but we are possibly experiencing some upgrade issues. Our main issue right now is getting a handle on the Maps - we've loaded the Google Maps and it was auto populated with many of our devices. However, I'd like to start fresh and ensure it is working on a clean slate. There are devices on the map I can delete, but there are many others that I cannot delete or get any information on at all - when clicking
Switching off SQL Alert
Good morning we are attempting to configure the SQL monitors with OpManager 12200 but am struggling to switch off the attached alert. We do not want to monitor this as we have many MDF's that are bigger than this and they are all alerting. I have increased the threshold but i think it would be better to just switch it off. Can you please advise how to do this? Many thanks
Problem with Real-Time View Plot window
I'm evaluating OpManager version: 12200 (64-bit) installed on Linux 4.4.0-62 (Ubuntu Dist) and found an issue with the real-time view plot. It appears that the Time Window field only affects the outbound plot. In the screen capture below, I show an example where the Time Window field is set to 1 minute (tested also with other values - similar results) and the outbound plot will reduce to 1 minute while the inbound plot continues to scale out indefinitely. As time progresses the 1 minute window
Typo on the interface "Additional Fields" section
I believe this should read "SLA related details" rather than "SLA related deatils" Attach image shows the misspelling.
Typo - Dashboard Ribbon
It is a fastidious detail, but it would certainly add to the professionalism of the product if the words, particularly in the prominent sections and titles, were spelled correctly. In the netflow section of the main dashboard ribbon, the word "Transfered" should be spelled as "Transferred" (with two R's in the second syllable). References: https://en.oxforddictionaries.com/definition/transfer https://english.stackexchange.com/questions/38915/why-is-transferred-written-with-two-rs
Plots are difficult to read without the ability to set custom unit scale
I'm evaluating OpManager for a potential purchase and have found some issues. I'm running v12.2 on Ubuntu Server 16.0.4 LTS. I've noticed that it is very difficult to read the plots in OpManager as the scale on many graphs is set to bps. As most of my network is running at multi-gigabits / s of throughput, this leaves me counting zeros on each graph to interpret what I am looking at. If this could be set to a user customizable scale (i.e Kb/s, Mb/s or Gb/s), OpManager would be substantially
Unable to modify Enterprise Dashboard, this restriction is unnecessary and causes problems when a widget fails
I'm evaluating OpManager for a potential purchase and have noticed some problems. I'm running v12.2 on Ubuntu Server 16.0.4 LTS. This issue occurred while trying to edit a widget. The widget disappeared while leaving a blank spot on the dashboard. As I am restricted from making any changes to this dashboard, I cannot delete and re-add the widget to fix the problem. Attached picture shows the problem.
Dashboard Last N Hours Widget - 1 hour period doesn't show the correct time frame
I'm evaluating OpManager for a potential purchase and have found some issues. I'm running OpManager v12.2 on Ubuntu Server 16.0.4 LTS. In this issue, there is a problem with the dashboard widget "Last N Hours" where the time frame produced on the plot doesn't match the period selected. When selecting "Last 1 Hour" period, the plot shows instead the prior hour (ending at the top of the hour) rather than the last 1 hour (ending at the current time). When selecting "Last 2 Hours" period, the plot
Op manager doesnt know if the service restarted
Hello, We're monitoring a windows based service named X with opmanager. When this X service fails it restarts itself in 6 seconds just because it's a live service and it's supposed to restart it self very quickly. However sometimes even the service fails opmanager cant alert it fails because it restart too quickly. We really need a solution regarding to this as we cant know if the service is restarted or not within day. Regards.
WMI or SNMP monitors?
Hello, Apart from the different configuration that the server must have, which one is better? Thanks, Jordi
Change OPManager Probe IP address
May I change the probe IP address? Do I need to change something? Thanks
netflow hakkında
Cisco 6807 netflow ları eklememe ragmen vlan trafik bilgisi geliyor portların bilgisi gelmiyor bi yardımcı olursanız sevinirim.
Automation in of manager with java and scripts.
Hey as time go forward i notice that skill of writing small programs/scripts that would do one job for many for example device templates. i see that it will be very usefull propably all the way with this managing art piece. So for example how i should approach this thing. I would like to set up notification profile to 60 devices. I have in execl all data to know how is responsible for a server and what is email to him. Can someone help a bit? i am fresh programer i know java for now.
Event log of restart
Hey i need to set up allert from event log (server restarted) from there server that way it would be visible in allerts if one had occure.
Removing devices from OpManager after a set period of inactivity?
Good day, I was wondering if there's any way in OpManager to remove/unmanage devices after a set period of inactivity? The question was asked in this post a few years back, and I was hoping the feature had been implemented. Thanks in advance for your time.
How to display database size in GB instead of KB?
SQL server application template reports database size in bytes and when you have large numbers this numbers are big yet really hard to quickly figure how big. Is there are way to report size in GB?
OPManager on a Display Monitor
Hi Team At present when we are trying to project business view on a display monitor they are not coming proper . The image is very small can anyone guide the right way to do it . Regards manish
OPManager on a Display Monitor
Hi Team At present when we are trying to project business view on a display monitor they are not coming proper . The image is very small can anyone guide the right way to do it . Regards manish
OPManager on a Display Monitor
Hi Team At present when we are trying to project business view on a display monitor they are not coming proper . The image is very small can anyone guide the right way to do it . Regards manish
OPManager on a Display Monitor
Hi Team At present when we are trying to project business view on a display monitor they are not coming proper . The image is very small can anyone guide the right way to do it . Regards manish
Opmanager cant aware of the service is restarted
Hello, We're monitoring a windows based service named X with opmanager. When this X service fails it restarts itself in 6 seconds just because it's a live service and it's supposed to restart it self very quickly. However sometimes even the service fails opmanager cant alert it fails because it restart too quickly. We really need a solution regarding to this as we cant know if the service is restarted or not within day. Regards.
Opmanager cant aware of the service is restarted
Hello, We're monitoring a windows based service named X with opmanager. When this X service fails it restarts itself in 6 seconds just because it's a live service and it's supposed to restart it self very quickly. However sometimes even the service fails opmanager cant alert it fails because it restart too quickly. We really need a solution regarding to this as we cant know if the service is restarted or not within day. Regards.
How / What should I check if the OPManager can not be startup?
Dear all OPManager expertise, I'm new on using the OPManager. Here I encounter a problem that the OPManager can not be startup. How / What should I check? Thanks a lot! Raymond Cheung
Can Windows device template include Windows services?
I would like to add standard set of Windows services to Windows device template whenever we add new server so that we don't have to add them manually. Is what I am asking possible?
Remove devices automatically after set period of inactivity
Hi, Is it possible to automate the removal of inactive devices after a set amount of time of inactivity? As an example, if I have a Hyper V server that I decommission, it will flag the host as offline and subsequently all VM's on it too. Is it possible to create a workflow that can run on schedule or perhaps a trigger (30 days of inactivity) that can remove the machines from Opmanager? thanks
Error parsing ISILON MIB
Dear all, We have downloaded the ISILON MIB from OneFS. It;s failed to upload to Opmanager and get an error. Can you please advise how to resolve it? We are using Opmanager ver. 11600 (64 Bit). Best Regards
VCenter Events OpManager 12.2
I am currently using OpManager 12.2 and Im currently taking advantage of the VCenter monitoring. Daily there is thousands of Events that come in for informational events in for the VCenter Servers. I see in OpManager Database maintenance I can set how many alarms to keep in the database. How to do I control how many "Events" to keep in the database.
Free Webinar: Overcome the top IT management challenges of 2017 using OpManager Plus.
Hello everyone, ManageEngine recently released the survey results on top five challenges that might impact IT in 2017. Around 150+ IT managers, network administrators, CIOs and other IT professionals shared their views and predictions for this year. Based on the report, we have come up with our next webinar on how to overcome these IT challenges using OpManager Plus and get ready to combat them with an integrated network management solution. Webinar details: Topic:Overcoming the Top IT Challenges
Cisco device in critical test
Hi, I see couple of cisco devices in critical state.I can ping the device, SNMP and credetial test is passing through.I am even able to backup the config. How can i see log for which device is in critical state!!
Central not Syncing to Probes 12.2
Has anyone on here had a problem with verson 12.2 Enterprise with the Central not syncing with probes? Initially everything seemed to be working. But now when we add new servers to the Probes they do not show up in the Central. Central will continue to get data from previous servers added to the probes. But not any new ones. I currently have a ticket open but they are still looking at logs and I'm kinda stuck this weekend. No firewalls, same subnet. Shows connected in Probe details. Looking
How to delete scheduled discoveries?
I created a couple scheduled discoveries, but now I can't find how to delete them?
V12.200 - VMWare Events not alerting
Have been testing monitoring of VMWare events from vCenter. While OpManager sees the entire VMWare environment through vCenter fine, simple events like the migration of a VM do not generate an alert. We've tested this over and over today, with no results. Even powered off a VM, the only alert was from WMI and ICMP as the windows server was offline. - Ross Townsend
V12 lack of intuative configuration documentation
We migrated to v12 and like most migrations within the OPManager platforms, it was painful. This time, I fear its been irreversibly damaging to our DB. I liked the added feature of vCenter Auto Discovery, however I don't believe it ingested the existing devices in a healthy manner. If I go to a device within the vCenter inventory and try to start monitoring it, there's a prompt to add an IP. When I try and add that IP (which should have already been known during the auto discover of an existing devices),
Invalid License File errorCode ERROR CODE : 501
After rebooting the server OpManager won't start and I get a error 501 Invalid License file. I have version 9 of OpManager. Last time this server was rebooted was back in August of last year with no problems. The only thing different was that I added more memory to the server.
Custom Dials relocating to correct title header
Good morning I have attached a screenshot of normal dashboard for a rds server. I have switched on several dials but they all seem to be populating under custom instead of the correct title. For example the disk usage dial should be under disk title but is instead under custom. Can we move the dials? Am i doing something wrong with the dials like choosing incorrect ones? Any assistance would be appreciated. Many thanks
Can we go back to 11.6?
Maybe version 12.2 has a nice view but we prefer a working tool. It is slow very slooooooowwww. No afther some weeks a lot of devices are gone. Now we had to start over again to fill the tool we want to know is it possible to get back to 11.6.
Opmanager Inbuilt tool
Dear Team kindly clarify my doubts on Opmanager inbuilt tools.In the new version of OPManager are the following included without licence . a)workflow b)Rack builder c) 3RD Map if yes are they available in both essential and enterprise. Why don't we have a booth camp or training webinar has available in service desk. Regards Manish.
Windows Service Monitors Empty List
I am trying to setup a proof of concept where I am trying to monitor the failure of a particular Windows service. I have a Desktop PC running Windows 10 (target) and a laptop running Windows 10 (Server). There is no domain setup on both. I have added the desktop to OPmanager and successfully setup SNMP as well as WMI. The test credentials shows as a success. If I go to the monitor tab and select windows service monitors and then add a service, I will get an empty list. Isnt there suppose to be a
Next Page