OPM Device logs
Hello Team, I need to trace logs of multiple devices, which are configured in OPM. Basically I required data of any configuration change was happen to device template or any category configuration was change in OPM, is that logs saved in OPM or it will created by OPM. I search on report tab, but there is no option found for my request. if is possible, then please guided me to get it. Please suggest. Thanks & Regards, Viraj Vadke
Changing ethernet default graph - V12.2
I'm looking in changing the default ethernet graph because it's a little bit misleading: it shows the traffic summed and not overlapped that would be preferable for a full duplex interface. I've looked around but i'm not able to find a way to change it. Do you know if it's possible to select a different kind of graph to display ethernet data? thanks
Device SNMP vals in Degrees F
I am monitoring a number of devices that report via SNMP their temps in Degrees F. Being from Australia this is of limited value when I have to continually mentally convert it. Is there a way Opmanager can perform recalc the values when received and stored so that Thresholds, Values, Graphs in Opmanager are working with Degrees C.
VMwareVirtualMachine deleted by mistake
Hi all, By mistake i deleted the VMwareVirtualMachine Device Profile in my OpManager 12.2 Is there any way to recover i, i tried to find this template to download without lucky. Thanks in advance! Nicolas
Monitoring Windows Server 2016 and Hyper-V 2016
Hi When will Opmanager support Windows Server 2016 and Hyper-V 2016. Thanks Best regards Eyðun
Create a template for VPLEX EMC storage
Hi I got the MIBs for VPLEX EMC storage and I would like to create a template for them, and I have tried to create a device template but it doesn't work with me. can you help me to create a device template for this device? Thanks ...
Create new device template for EMC VPLEX storage
Hi I got the MIBs for VPLEX EMC storage and I would like to create a template for them, and I have tried to create a device template but it doesn't work with me. can you help me to create a device template for this device?
Device template thresholds notification
i am having some problem with this approach. I set up the threshold values for monitors on devices templates. i added notification profile selecting option that should generate emial whenever any threshold value is excced but it dose not seems to work and i have no idea what could have gone wrong. any ideas ?
Device template thresholds notification
i am having some problem with this approach. I set up the threshold values for monitors on devices templates. i added notification profile selecting option that should generate emial whenever any threshold value is excced but it dose not seems to work and i have no idea what could have gone wrong. any ideas ?
NETAPP aggregate info wrong
I have OpManager 12 monotring NETAPP 2240 filer and I ma getting following alert Aggregate Used Percentage for .9 is 62 %, threshold value for this monitor is 60 % I checked Netapp stats and aggregate is using 44% while one of the volumes is actually at 62%. It seems that "Aggregate used percentage" thresholds are for some reason applied to volumes as well. Any idea?
How to import template .xml file into OpManager
Hi, Can Someone explain me about how to import .xml template file into OpManager? I just started using this software recently. Thanks.
How to import template to OpManager ?
Hi, I am just started testing the OpManager and I see lots of templates (eg. cisco, juniper, server2012R2) I like to know how the template is used in OpManager and how to import the template into OpManager? Thanks. Yan
v12 - Auto Discover and Device Templates
Can someone possibly shed some light on the most straight forward and efficient approach to adding 1000 devices into v12 without doing it manually? Would it be the following: 1. vCenter Auto Discover 2. Modify default Device Templates as necessary (how to associate)? 3. Create Notification profiles - which triggers will alarm what emails. 4. Create Rules Engine to create notification profile association?? 5. Run Auto Discover (to associate alarms, alarms <template> and notification profiles)??? Is
Issue in adding MIB files for Sonicwall firewall
Hi Team, I imported the MIB files from sonicwall websites and added in OPM. But when i configure the monitoring profile it is added but not showing in monitoring tab. Please advise. Sonicwall Model # NSA2600
Unable to Update Database
How to monitor DHCP scope? The DHCP scope monitoring OIDs are present in the DHCP mib.Hence the following DHCP mib and MSFT mib has to be placed in the OpManager\mibs folder.Find them attached in this KB article. The OIDs are .1.3.6.1.4.1.311.1.3.2.1.1.3 for FREE IPs and .1.3.6.1.4.1.311.1.3.2.1.1.2 for IN USE IPs in a network address Verifying the OIDs Run the mibbrowser.bat in the OpManager\bin folder and load the DHCP mib. Fill the details of the HOST,community with the details of the DHCP server
vCenter Auto Discover - Notification on newly auto discovered device
We have enabled vCenter Auto Discovery. It appears to have worked discovering all host and virtual machines associated to the vCenter referenced. I have a few followup configuration questions: 1. Can there be an email alert anytime a new device is auto discovered by this feature. This will ensure the device is reviewed for any further application based monitoring. 2. Can there be a default monitoring profile associated to any new device that will automatically be associated to any new device discovered
Unable to add new MIB
I am trying to add MIB: CISCO-IPSEC-FLOW-MONITOR-MIB Download from: https://iphostmonitor.com/mib/CISCO-IPSEC-FLOW-MONITOR-MIB.html I already copy the ".my" files to the folder "mibs" on the OpManager's Installation folder When I try to add a new SNMP the new MIB does appear in the list. I have already restarted the server and still the same
Custom mibs for ibm flex chassis
Hello is there a guide to adding custom mibs for Ibm flex chassis adding them to Op manager 12.2? I need a bit of help getting it working , it works and polls in the mib browser but that is as far as I am getting, it doesn't work when I try to get it inside Op Manager. I am probably doing it wrong, Any help is appreciated. Robert
Problem with loading mibs for HP 5500 and Cisco SG300 switches
Hello, I use a trail version of OpMangaer and I wanted to monitor my switches the HP 5500 and Cisco SG300. I loaded the mibs I got from my vendor to op manager but when I want to see them in the mib explorer the uploaded mibs are empty. Is there a converter or something of the sort for OpManager?
Device Templates
I have some virtual windows 2012 servers. They are asigned to both the VMwareVirtualMachine and Windows 2012 R2 templates. I want to remove the devices from the VMwareVirtualMachine and just use the Windows 2012 R2 Template. If I go into the associate section of VMwareVirtualMachine and remove the device what ever I do afterwards associate or apply & overwrite the devices are never removed. Any advise? Andy
How to Increase number of servers in "Health Report" ?
Hello, I'm using Opmanager to monitor all devices/servers. And I have to export health report weekly. But the health report shows only 10 devices/servers as pic. How can I increase more than 10? Thank you.
Error when load MIBs file
When i upload MIBs file into Opmanager is success but when i load MIBs file there is error. Please tell me why and how to load file MIBs. P/S: I send you error image and MIBs file Thanks.
Error when load file MIBs Juniper
Dear Support, I upload MIBs file of juniper success but when i load file it there is error bellow: Error parsing MIB:juniper-mibs-15.1X49-D70.3.zipException while loading MIB:Not a valid MIB file : E:/OpManagerProbe/./mibs/juniper-mibs-15.1X49-D70.3.zip Please Support me how to load MIBs file. P/S: I send you MIBs file and image error. Thanks & Regards.
how to add a new category in OP 11
is it possible to add more custom categories within the device templates ? thx Bauke
Mount Poing OPM
Hello all, Is there any possibility of monitoring the mount points through OP? I see that with the AP plugin I can monitor them, but is there any way to link it to the OP so that through it can show them? I have also seen that adding the WMI object can be monitored, but I can not find where the query can be made to add a custom monitor, I only have the option to add predefined monitors. Thanks, best regards. Jordi
Device Template for Cisco 3850 Series Switches
Hi, Please share me the Device Template for Cisco 3850 Series Switches. Thanks, Ramesh
Default threshold for Application Monitors
I need to change the threshold for the application monitors from Critical to Attention. When I set the threshold through the administration tool it applies it to Critical.
Add process monitor to several servers
Trying to find a way of monitoring a process on several servers - the quick config doesn't include processes. V11 Thanks Andy
Can I monitor Netapp?
Hello everyone Where I work there is a netapp storage system. I want to know if it is possible to monitor. If you can monitor it, you can tell me how. I would appreciate it if you help me. Thank you
IFIndex to Real Names Cisco ASA
Hi, I would like to the ASA to display the correct name of the interface rather than the ifidex names.ASA version is 9.3 and the OPmanager is version12.
Wrong DNS entry saved in device template.
Hello Team, We updated our OPM in 12200 version, after observing virtual device, we got that some device showing wrong DNS entry in there perspective device template. how to fixed it?
Custom Monitor Is Missing
Hi All, Here is my situation: We have installed central-proble OPM with version 11600, and there are some F5 devices(including model VIPRION 2400、GTM 2000、 LTM 4000) in OPM system. However the default cpu monitor always display 98%, so we had to create a custom monitor with correct value as below, and then applied on F5 devices template and related F5 devices without any error message. But after applied to devices with "add successfully" message, we couldn't find the custom monitor under
Threshold Value issue on opmanager in version 12200
We have added our windows device on Op Manager for monitoring in that we have set threshold value 90% to send alarm and re-alarm value as 85%. But after saving threshold value its getting disappear or unable to save.We are currently upgrade our version from 9 to 12.
Availability Statistics
Would you like to know how to import the availability report of a certain device to PDF? In the current version this option is not appearing. As you can see in the image below does not appear the option to import, version 11.6 was possible.
Partitions details query
Good day I've noticed when certain servers alert on partition details, some alerts show the affected drive while others don't. This means our helpdesk guys need to click on the alert, then click on the server, go into monitors and check which threshold is violated. Do you guys know why this is the case? I have attached a screenshot showing an example - both are WMI monitors. Let me know, Mat
Need device templates for Palo Alto -500 and Brocade ICX and VDX
Need device templates for Palo Alto -500 and Brocade ICX and VDX
Monitor HP blade C7000
Hi I have Install Opmanager 12 and want monitor HP Blade C7000 but couldn't find any template about this. then review all post for this problem from 2 years ago still now but couldn't find any answer. anybody idea about this? any news about the template of Blade? Regard Hamze
OpManager SNMP, string name instead of integer value?
Hi All Is it possible to have the status of an SNMP poll display a text string instead of a numerical RAW value? I'm trying to read the status of all the disks in an Dell EqualLogic array. Using the MIB browser, the result of the GET request is: eqlDiskStatus.1.472441240.1:-->on-line(1) When I add the OID to a custom template, the status lists the number 1 as the last polled value. Even though I know 1 means online, it would be nice to have OpManager show "on-line" as well so that it is clear that
Dell N2024P and N2048P cannot monitor
Hello, I have about 40 Dell N2048P and 2 N2024P switches and they are not discovered as switches (OpManager states: server). When I change it to switches it accepts it, but all the monitors are not working properly. I see that model N2024 nor N2048 are present in the list of available devices. What do I do? Thanks
Generate Device Template from MIB
Hi, I was wondering if it is possible to create a device template from a MIB file? Sure, I can create a custom device template adding all the OID's by hand, but it would be nice to have OM create all the monitors from the MIB file. Is it possible? Regards, AJ
Next Page