Kentix MultiSensor LAN - Device Template
You can download the XML File and integrate easy the Kentix AlarmManager device into OpManager
Unable to change Category in Device Details
Hi there, We are running OpManager build# 11500 and currently have an issue when trying to update/change the "Category" value for a device. Under the Device Details tab for an individual device we do the following: Click on "Edit" icon (top right hand side) In the "Category" drop-down list select a new category Click on "OK" At the end of the process we do get an " Info" message at the top indicating "Field values are successfully updated to the database". However, the category value doesn't change.
Last polled value "No data available"
Hi, i'm new using opmanager and i'm trying to monitor a few devices using SNMP. The problem is when i add the last polled value of a performance monitor widget in the dashboard, sometimes it shows the correct value, however most of the times only show "No data available". Am i doing anything wrong? I would appreciate if someone can help me.
Copy SNMP trap processors from one probe to the next
We use OpManager central to connect to 3 remote probes. Each probe has about 250 various devices connected to it. We use SNMP traps extensively and have had to customize the alarms etc.. for over 200 SNMP MIB's to get the alarm parameters correct. Is there still no way to copy this from one probe to the next? I opened a ticket a long time ago and asked for this and they said it was future maybe. But this is crazy, I cannot believe there is not a way to export and import that data via script or
Device Templates associated to groups of similar servers
I have only seen older posts regarding this question but haven't seen any updates to them. I have a few hundred windows Server 2012 R2 servers that are grouped logically by development regions in our environment. Example: dev, test, stage, prod. These servers all run the same OS and configuration. We group them logically by server naming convention and what region they are in. So my question is how do i create multiple templates all for Server 2012 R2 and assign different thresholds to each template,
Netflow inaccurate traffic values
The situation I have is I have recently bought the license for NetFlow plugin, now I added three to 5 devices testing the monitoring, and seems there is an issue in traffic values, IN TRAFFIC and OUT TRAFFIC I have ASR 1002, I applied different netflow configurations The one that didn't work which is the flexible, I didn't get any devices on NetFlow flow exporter ME-FE destination 10.20.116.67 transport udp 9996 flow record ME-REC match transport tcp destination-port match transport tcp
OpManager and eSensors temperature probe not saving data
We have an Websensor EM08 and I have set it up OpManager to see it and created a device template for it. I tried to setup threshold monitors for temperature and humidity too high / low. I can click the Test Monitor button and it shows the temperature or humidity level. I have also selected "Yes, I need graphs." But when I try to pull up a graph or I go into the monitor I have setup, there is no data. So in summary, I have set it up, confirmed that it can retrieve data, and said I want it to store
OpManager - CMDB plugin
Hi there, I'm trying to install CMDB plugin for OpManager (x64) from the following site: http://www.manageengine.com/network-monitoring/cmdb-download.html I chose the 64 bit option and successfully downloaded the file. Filename: ManageEngine_OpManager_CMDB_PlugIn_64bit.exe When the installation was started, I was presented with the following install wizard box: Why? Maybe they put the wrong file??? Not sure if it's related ... I have ServiceDesk Plus running on the same server.
Instance count case sensitivity
So, here's my problem. I have multiple servers running various applications, all of which run a specific number of instances. Process monitor works great for anything with only one instance, and I have been figuring out how to use script monitoring for the others, based on the instance count script template. As the developers here have (finally) been getting these applications ready for me to move them server 2008, I have encountered a problem on the monitoring end of things. If I open an application
Nontification for devices with high latency
dear team, it would be possible to avoid the triggering of many notifications of network devices with a latency particularly high ? it would be possible to configure not to send notifications to devices with latency of 600 ms for example ? thank you.
To list the nodes thats not collecting performance data
Hi, Need your help to pull a list of monitored nodes which has no data available in their parameter. I am looking at finding out the list of servers that's not actually collecting performance data and to fix them to ensure all nodes are monitored.
Credentials on OP manager
Hi, How secure are the credentials stored in opmanager. Is it hashed or stored as a flat file ? Can someone retrieve these credentials ?
where to look for information, version 11.6, all the changes.
where to look for information, version 11.6, all the changes.
OpManager Reports at a Glance Missing
OpManager 11 doesn't appear to have the "Reports at a Glance" when going into a device. Is there a way to get this back? Regards -Gary
OpManager, well so far not so FLUID experience
I never used buggier application in my life than OpManager. Amount of stuff that doesn't work is just ridiculous. Idea that whenever something doesn't work "just switch to old UI and fix it there" is nonsense. You want to review your server monitors? "It's easy, just click on Monitor tab!" well it doesn't work, blank screen. You want to remove monitor? "Just click on Remove button!" Well .... that bloody button doesn't exist, ohh yeah sorry ... it's in "old UI". "Your service is down", said OpManager.
Device Notes Fields Order
Is there any way to set the order of the Notes fields. It seems to be ordered very random. Doesn't even follow the list in admin or the order they were added to OpManager.
OpManager Essential Edition
Please guide me to Manage Engine OPManager Technical Documentation page. Thanks in advance
Cradlepoint Routers
Has anyone setup monitoring on Cradlepoint Routers and been able to gather statistics such as processor time, temperatures, and such? Do we know if Cradlepoint will be added as a vendor?
Error Message: Loading MIBS Failed: Could not find the file: ./mibs/RFC1213-MIB
MibBrowser will not load MIBs. The MIB folder is present and verified.
Cisco 3650 MIB for Custom Template
Has anyone created a custom template for the Cisco Catalyst 3650 switch? Which MIB should I upload and apply?
Key based credentials
I need to monitor a server which does not allow for native login instead they create a key based authntication. Can I ad the private key to op manager to enable monitoring this linux machine? If so how?
Auto detect "type" of Fortigate
Hi supporter, Why Opmanager cannot auto detect "type" of Fortigate (use add snmp)??? Fortigate Template default (have add some new SysOID): parameter monitor CPU, Memory, Active Session have not data collection happened. Memory Utilization OID: .1.3.6.1.4.1.12356.1.9.0 CPU Utilization OID: .1.3.6.1.4.1.12356.1.8.0 Active Session Count OID: .1.3.6.1.4.1.12356.1.10.0 Fortigate template custom: parameter monitor CPU, Memory, Active Session have data collection happened. cpu
Cisco Nexus 5596 Operational Status
We have several ports that are not connected ("Operational Status = Down"). Why do we see errors reported in this state?
WMI credentials encryption
Hello Can anyone tell me whether the credentials entered for Windows/WMI in OpManager 9 are stored and sent to the remote devices in a secure encrypted fashion? Thanks
Pulling Description from one OID and Values from the other.
I have a Cisco 4500 Switch that has multiple module cards in it. We are trying to monitory the temperature on each of them. Using CISCO-ENVMON-MIB and OID .1.3.6.1.4.1.9.9.13.1.3.1.3 (ciscoEnvMonTemperatureStatusValue) we get the values returned fine. However the descriptions don't come through. So we get the instance ID rather than the NAME of the module. Is there a way to join .1.3.6.1.4.1.9.9.13.1.3.1.2(ciscoEnvMonTemperatureStatusDescr) and the .1.3.6.1.4.1.9.9.13.1.3.1.3 (ciscoEnvMonTemperatureStatusValue)
Interfaces not staying on device
A while ago we re-installed our opmanager server on new hardware using the latest version to get a fresh start and clean databases. Since then I have 2 devices on my network with this same issue. Both are Sonicwall Firewall's model NSA 3500 (pre Dell). Both show no interfaces. I click discover interfaces and all the interfaces are correctly discovered. I tick the ones to add and click the save button, it reports 'interfaces added successfully' and it goes back to reporting "no interfaces are there
Inconsistencies between old and new UI?
Hi there, While troubleshooting high utilization of one of our switches, I just realized that I can't find certain info on new UI. In the old UI: go to a switch detail view click on Interfaces tab click on an interface (preferably the problematic one) no the left-pane, under Interface Details tab, click on the link for Utilization it will show you a quick info on in/out % as max, min, avg, and 95th Percentile along with its recorded reading time In the new UI: go to a switch detail view click on
SNMP Clear on OpUtils
I have integrated WebLogic SNMP Trap Notification with Manage Engine Oputils, and I'm able to receive below SNMP Alert traps. The issue is, clearing the relevant SNMP Alert trap. Is there someone also know WebLogic, because, I am confused. Is the action is on WebLogic side or OpUtils side. Can someone please redirect me for clearing the below SNMP trap notification which is sent by WebLogic and recieved by OpUtils "SNMP Receiver" wls .1.3.6.1.4.1.140.625 10.100.x.xx 0 hours, 29 minutes, 27 seconds.
Hyper-V Replica monitoring
Can OpManager monitor the health of Hyper-V's "Replica" feature that was introduced in Server 2012 (and now R2)? That is, on a per-VM basis can we set up OpManager to send an alert if the Replica status goes from "Normal" to "Critical", for instance?
separate log folder
Hi there, OpManager build 11500 Is it possible to direct the log file to a different path? Perhaps another disk? We got our C:\ with only 500MB free space. Thank you.
Validate Device unmanage
It is possible to create an action for device validation that are as unmanage and send an e-mail. Run every X time. Thanks
overview of switch interface utilization
Hi there, OpManager build 11500 For the past few weeks, we've been having this report of a particular switch port goes above the configured utilization threshold. Problem is, we're having a hard time finding out where does the traffic went from/to. So my question is, is there (an easy) way to find this out? I'm thinking of a graphic showing a bar (% in/out utilization) for each port at a particular time. Really appreciate your advice on this!
Schedule Downtime for a Monitor and not a Device
We have set up a file monitor for a file that is being updated by a scheduled task. The scheduled task is on a server that needs to be monitored 7 days a week. The scheduled task however runs only Monday through Friday. I am hoping there is a way to place downtime on the monitor itself apart from the server. We could associate the monitor to a device that is not monitored on Saturday and Sunday but I would prefer not to do go that route. In short, is there a way to set up a monitor so that is
Contacting Customer Care?
How do I contact Customer Care ( not support ). We have constant problems with out OPM system, whilst they do tend to get fixed it can take ages ( I have had a call fixed yesterday after 2 1/2 months ) but that has now broken a Kludge to fix SMS delivery. It seems like the software is not being well tested before release and we are doing the testing live! Can Customer Care contact me on this. Thanks Robin
Questions surrounding new UI in OpManager
Hi, A couple of questions surrounding the new UI in OpManager: - How do you assign device dependencies (both individual devices and multiple devices) in the new UI? I can't see an option to do this. - In the older version of OpManager we were able to singularly add ESXi hosts, and then from there, choose the VM's that we want OpManager to manage (we have the auto-vm discovery turned off). It looks like there is no option to do that anymore since having to add the vCenter to manage everything. If
vCenter no data
Discovery found them all as individual machines however the Dashboard and VMWare tab show nothing.
Monitor script not working on UTM/Linux system
Hi guys, I have several UTMs that are linux based, and I got a bunch of scripts that need to be run on those. Thus, I wrote a simple one, tested on a Debian (worked) via ssh/putty and via OpManager, but when testing on the UTM it worked via ssh using putty , but via OpManager it didn't. Note: on both I got the password/credentials test working. Note2: I takes aprox. 20 seconds to return the error (However it is not by timeout): Exit Code 4 Message Script_teste:Internal Server Error while processing
Dashboard not showing information
Added my vCenter and ran discovery found all hosts and VM's I can see them in the inventory tab but nothing is showing on the dashboard or vMware Tab.
User Credentials localhost OpManager
Hi all, I'm trying to monitor the server where OpManager is installed, but i've some problems. By WMI credentials, when i set up the User and Passowrd, shows me the error below: "User credentials cannot be used for local connections" Then, i installed SNMP service to collect the data by snmp. When select 'Test Credentials' shows that result 'passed', then click 'Ok'. When i back to the local server, OpManager dont collect the data. Anyone can help me? Thanks,
Installation Issue V11.5
OS = Server 2012 Std I had been running Version 9.1 of Opmanager since its release without issue, it had been incredibly trouble free. I have uninstalled OPMgr 9.x to begin with a clean installation and fresh DB (following an entire tech refresh). When I try to install OPmanager V11500 64bit I get an InstallShield error "An error (-5001 : 0x80070002) has occurred while running setup" "Please make sure you have finished any previous setup and closed other applications. If the error still occurs,
Next Page