alarms that won't go away in opmanager central
i've setup a remote site (probe) for testing. and i have about 5 alarms that are no longer alerting, all green in the central and all green on the probe side. also, any new alarms that i generate (for example, i've made a device unavailable) clears up just fine when i make the problem go away (making the device available again for this example). so everything looks fine, except these 5 alarms that got "stuck" there. i have no delete option on the alarms section (is that supposed to be like this?)
probe and central communication
i wanted to ask, is it a "call home" topology? is it enough that the probe will communicate with the central? or if i want to monitor a remote site i have to also open ports incoming from the central back to the probe?
Monitoring stopped. Only few devices are collecting data.
Hi, I use OpManager 12.4.079. Since Friday, I have been constantly received alarm: "Monitoring stopped. Only few devices are collecting data. Check "Devices/Monitors by DataCollection Failure" widgets under System Performance Dashboard to analyse the problem". I restart the server or service, the program works two hours and again the same message arrives. How can I resolve this issue? My infrastructure remains without monitoring and this is very critical to me.
[ManageEngine ITOM Webinar] Is your network ready to handle a remote workforce?
Businesses all over the world are shifting their operations to a remote work model amidst the COVID-19 lockdown. However while switching to remote work, businesses face certain complications such as network security, constant configuration changes, insufficient VPN capacity, and inability to scale mobile IT devices for remote employees. To combat this and ensure business continuity, IT administrators need to remodel their IT infrastructure. This webinar will help you learn how to secure your IT
is it possible to get email alerts for specific devices?
let's say i want technician1 to get alerts only for specific device. is it possible?
is it possible to hide the tray icon of the opmanager agent?
i mean the green tray icon
OPM v12.3.109 How to Configure SNMP Community on SunSolaris v11.3
Hi, Please, could you support me. I want to discovered the interfaces in an operating system v11.3 Sun Solaris, but I do not found information about this. This version is supported? Thanks & Regards. A.
opsmanaer plus - mgmt port is the same as agent port
which is a security breach it would be nice to be able to change mgmt port apart from the agent port
opsmanager plus and firewall analyzer
is there a way to get them to sit on the same server? it's quite a waste to place them on separate servers
opserver error when trying to add vacenter "VMware Server session not established for vcenter"
vcenter 6.7 windows based no firewall blockage dns resolves MOB is accessible via opsmanager server any ideas?
Microsoft Exchange Monitoring Service is Down
i get this under alerts, but nothing is down on the server get the same for 2 exchange 2016 servers any ideas? it's a fresh install
SNMP on Brocade switchs
I'm a newbie in IT, especially switches. So we have these Brocade swicthes on which I created a community string on and OpManager says my credentials passed but cannot pull Interfaces nor monitor ports. What am I missing here?
Cisco Catalyst 9200L 48-port PoE Switch - template
Hi ALL! I have Cisco Catalyst 9200L 48-port PoE Switch and i need monitoring it ) Who can share Device Template for this device ?? Thanks
Linh vào nhà cái W88 mới nhất ko bị chặn
link vào w88 là một trong những nhà cái cá độ bóng đá, casino trực tuyến uy tín nhất tại Việt Nam. Tuy nhiên, trong một số tình trạng link vào W88 thường xuyên ko tróc nã cập được, điều này tác động không tốt đến giai đoạn tham dự các trò chơi tại nhà cái này. Tiếp sau đây W88 sẽ tổng hợp danh sách link vào W88 mới nhất bằng điện thoại, máy tính và hướng dẫn anh em cách vào W88 lúc bị chặn. Link vào W88 mới nhất W88 là một trong những nhà cái uy tín với đa dạng trò chơi hấp dẫn như: cá cược thể thao,
Best virtual server management practices for exceptional IT operations
IT teams have a hard time handling zombie VMs, host hardware configuration backups, CPU resource allocation, and memory utilization. So we came up with practical, tried-and-true guidelines for impeccable virtual server management. This ebook sheds light on: Virtual server monitoring and management cycle 10 tried-and-true virtual server monitoring best practices How to choose a suitable virtual server monitoring tool Read more: https://https://www.manageengine.com/network-monitoring/server-virtualization-management-best-practices.html
Opmanager
Hola, desde hace tiempo he intentado instalar la aplicación Opmanager pero no me resulta la instalación, la licencia que tienen en la empresa en donde trabajo es una licencia perpetua de una versión algo vieja. Creo que se debe instalar con algo que se llama así como produckey y no tengo la más mínima idea de como utilizar ese archivo, según recuerdo esta debe ser instalada mediante comandos. Espero su colaboración. Quedo atento y muchas gracias.
Add Notification Profile Variable
We currently have a Custom Property Field added to devices that we have to manually add a list of email recipients. But, there should be a notification profile variable for the Device called "assigned notification profiles" or the like that can automatically include the notification profiles (see screenshots). This ensures that anyone receiving the email will know the other groups that also received the email. Notification Profile Variables Assigned profiles
OpManager - Internet Bandwidth
Hi Team, It would be interesting if OpManager can have a menu for measuring Internet Bandwidth and has consumption records, this can be run for hours, minutes, etc. What will it solve: This will help monitor the service of the Internet provider, this is usually a big problem when contracting bandwidth plans, providers do not comply with commercial agreements. Where I'm going to put it: Main Menu or may be in communications equipment. Currently add a custom widget with the www.speedtest.net portal,
Need to monitor last generated file on linux system
Hi guys, I would like to monitor the las generated file with below custom cli command $ls -l |tail -1 I could see return on 'test script' with last geneted file name but I don't know how it displays in dashboard as a text. Is there any way to display output with text form?
Remove "WID" SQL Instance
We have a server with both a "MICROSOFT##WID" instance and a named instance. We don't care to monitor the WID instance at all. We've totally removed all the monitors for the WID instance, but we still have to manually select the named instance every time we go to that server. Is there a way to totally remove the WID instance, and just have OpManager pay attention to the named instance? (No more drop-down list where we have to select between them.) Thanks!
Exchange 2019 support
We have Exchange 2019, which is almost supported by the current build of OpManager (12.4.103). The biggest issue seems to be the Exchange Service Monitor "Microsoft Exchange Monitoring," which was looking for a different service in older versions, but has been replaced by "Microsoft Exchange Diagnostics" in Exchange 2019 ---- I believe. So, what I'd like to do is point the monitor "Microsoft Exchange Monitoring" to watch the service "Microsoft Exchange Diagnostics" (Microsoft.Exchange.Diagnostics.Service.exe).
SNMP Traps not received by OpManager
Hello, I have issues with receiving traps in OpManager as no traps are currently displayed in OpManager v12.2. OpManager is installed on a Linux Centos 7 server. The following debugging steps has been taken: 1) A tcpdump on port 162 on the server running OpManager shows that the traps are being received correctly through the port so no issues with Firewalls 2) All devices are set with the correct credentials. 3) Trap definitions has been loaded through the mib files and enabled through the GUI.
Tomcat Vulnerability?
Good morning, is the OPManager software vulnerable to the Tomcat exploit in the link below? https://www.cisecurity.org/advisory/a-vulnerability-in-apache-tomcat-could-allow-for-arbitrary-file-reading-cve-2020-1938_2020-028/
Monitoring Cisco Telepresence
Hello, I am trying to start monitoring Cisco TelePresence systems. I can see even, that if proper SNMP community string is provided, OpM discover the device out of the box. However - it is monitoring the device with availability only. My question is - did anyone succeeded in more detailed monitoring? like monitoring network interfaces (and its details, like drops etc.). Final scenario is monitor somehow "User Experience" - to be aware before bigger (more massive) issue comes. I would like to know
DFS-R Backlog monitoring
I was hoping that "Replication Objects Remaining" would be the monitor to help watch DFS-R backlog, but that graph never twitches, no matter how much is sitting in the queue. I've googled the WMI behind it, and I'm still uncertain what exactly that is supposed to be monitoring... but it's definitely not the backlog. So, does anyone know of a way to get OpManager watching a server's DFS-R backlog? Thanks
MSSQL Monitors - select which databases to monitor?
Some of the monitors for MSSQL monitor the databases. For example, "Database Files Size" and "Log Files Used Percentage". However, on many of our SQL servers, we have important databases that need to be monitored, and then other databases where we couldn't care less if we're hitting 100% log usage. In fact, some of these low-importance databases are for read-only access with their logs shrunk and never expected to grow, so a 100% log usage on a 5MB log is just fine. We don't need to monitor that
Change default authtype for OpManager Login Screen
Is it possible to default the authtype on the login page of OpManager to be the domain name versus Local Authentication? It is a pain to have to change that every time a user logs in.
Mobile App Alerts
I hate having my phone chirp at me for minor issues, such at an Interface going up or down on a switch. 99.9% of the time, these are not actually issues (though I still appreciate them being logged). If it were an issue, I'd be getting an alarm that said a server was not available, etc etc. From my reading, I understand that OpManager is setting Interface Down events as a "Trouble" event. Is it possible to configure the mobile app in android to only alarm for Critical events?
OpManager installation MSSQL Host name or port number is incorrect
MSSQL 2017 was installed in Windows Server 2016. OpManager is now installing in the same server. An SQL Server local account was created - named "opm". Confirm can login through SQL Management Studio. At the stage of "Select the backend database for OpManager". Choose "SQL Authentication" Host name is <the_computer_name> Port is 1433 Database name is OpManagerDB User name is opm Password is <the_password_of_opm> After click "Next". Shows "Host name or port number is incorrect". Already tried input
Business View - Add snap-to-grid or auto-layout option
In business views that have a lot of elements, it would be good to have better layout options. Simple ones like a snap-to-grid button, or automatic dispersion of elements would be helpful. The ability to quickl select a large number of elements would also be useful instead of clicking each one (such as a drag-to-select).
DHCP Scope Monitor - Don't alert on disabled scopes
Under Tools -> Address Monitoring -> DHCP Scope Monitoring I have added our DHCP servers. The problem is, it adds scopes that are currently disabled (though they will be enabled at some point) so "zero addresses are available". The DHCP Scope monitor should either NOT add disabled scopes OR not alert on disabled scopes especially if the size of the scope is zero:
Downloading OPmanager
Hello, I've downloaded OpManager from ManageEngine website, but during the installation I'm getting the attached error. Please advice. Regards,
Having Issues getting certs on OpManager
Not Very knowledgeable in this area but here it goes because I want to learn! Our browsers don't like when we use a self signed cert so we're trying to use our companies internal wild card certificate. WE added it too IIS and and made our OpManager address something like "opmanager.company.net. Our wild card is *.company.net. Our cert is signed by GoDaddy.com.and opmanager has that and the keystore added to it. We can still access the server but the unsigned thing is still there Anything that I am
Disable Specific Alarm on Device
Hi. We're getting an alarm for one of our switches saying that the current state is shutdown for a power supply that doesn't exist (we only have 1 not 2 on the switch). I've been having a look at seeing whether we can remove this specific alarm for this specific device but it doesn't seem that this can be easily done. Any ideas would be appreciated!
URL Monitors and Notification Profile Synergy
We just missed a URL down notification because the user experience of setting up a notification profile for URL monitor issues is confusing. It turns out you have to specify the Notification Profile in the URL Monitor AND check the box in the Notification Profile to notify if ANY URL DOWN. In a URL Monitor, there is a section that says "Notification Profile (Optional)" (see screenshot). This would be understandable by itself, but if you take into account a notification profile says to notify if ANY
Rest Api TestMonitor
Hello. After updating the opmanager to version 12.4.079, rest api does not work. Namely, the test monitor method. (http://SERVERNAME/api/json/device/TestMonitor?apiKey=KEY&policyName=SystemUpTime.&graphName=SystemUpTime.&name=DEVICENAME) Error message "Invalid request method." errorcode "INVALID_METHOD"
Global Performance Monitor Thresholds?
Inexperienced OpManager here. Where do I go to modify a global threshold for a monitor? For example, monitoring a switch, it's constantly raising alarms on discard rates. I'd like to raise the discard rate threshold above 1% for a large swath of ports all at once. (For that matter, I can't even see how to do set that on the switch's ports individually...) Thanks in advance!
how can remove all recent alarms
would you please say how can remove all recent alarms ?
How can remove all recent events
Dear all Hi I am using op manager 12.3.295 . I added MDS sanswitch to it but i just want to know how can remove all recent events such as attach pic ?
Report of two devices
Hi all, i would to obtain one report of two devices , as union of two single report (for example, a OR Logic, so if one device is down, the other is active). My devices are not in cluster, there isn't a virtual ip. How can i do? Thanks Mike
Next Page