SNMP Trap Processor
Hi, I have configured OpManager to monitor approximately 400 Aruba access points via snmp. The problem I am having is with the SNMP Trap Processor. By default the severity for the wlsxAccessPointIsUp trap is critical instead of clear. This is resulting in the alarm not getting cleared after an AP becomes available. If I manually change the severity status to clear for the wlsxAccessPointIsUp trap, OpManager stops receiving or maybe displaying this type of traps. Is there a way to fix this problem?
MIB Issue (URGENT)
I am currently testing OpManager, our company would like to use this mainly for SNMP management to start with, but we need to ensure it will accept our third party MIB file before we can purchase the professional version. I have loaded the MIB into OpManager, the file loads successfully, the traps can be seen in the MIB browser, however when I attempt to load traps from the MIB using the SNMP Trap Processors page, I get the following error message: No traps are defined in NICE-MIB-II.mib However,
Cisco Router not showing Null0 interface
Hello, I have 2 Cisco 3640's in HSRP. In Opmanager, on one of the Ciscos I can see Null0) as an interface, on the other, I cannot. I also receive the following alarm: AuthenticationFailure : .1.3.6.1.4.1.9.2.1.5.0: null on the router that OpManager does not see the Null0 interface. Any ideas? Adrian.
PDA and OpManager
Hi! We are implementing OpMagager for one of our customers and he wants to have some some data also available on PDA (640x480). What are possibilities? M
MIBS
Hi, Can I put the devices mibs in subfolders under the /OpManager/mibs folder. The reason I want to do so is to be able to identify in the future which mibs belongs to which device and be able to update them or simply remove them. Thank you Ramzi
how to use OpManager with system-wide tomcat and apache?
how to use OpManager with system-wide tomcat and apache?
server cpu / memory / disk utilization never change
Hello, We installed OpManager V6 and we're monitoring a switch and 1/2 dozen Linux boxes (all CentOS V4). On the dashboard for each server we see the graphics for CPU Utilizaiton, Memory Utilization and Disk Utilization. For the CPU and Memory the value for each server have been absolutely constant for 3 days now. We know (at least) that the CPU utilization will change during the day (when cron's run etc). Can we get some info on how to debug this? Thanks, Frank
Customizing Interface - Opmanager
Hi, 1. How do I go about customizing the interface - like replacing logos and other images etc... on the splash page and subsequent pages. 2. If I want to remove few tabs and Links (Like Support Tab, Help Link etc..) ... how do I go about customizing it? 3. If I want to add "Add Notes" capability for a Read-Only user, how do I go about doing it? Thanks.
How do I setup event monitoring?
Hi, I need a tutorial on how to set up event monitoring on a remote computer running Windows XP. Basically, I'd like to phrase the contents of an Event description, and if certain critiria matches, it will then alert me by email. Any advise on how to accomplish this would be greatly appreciated. Simon
Unable to delete objects?
I just ugpraded to the latest hotfix. I am unable to now delete any objects. Here is a sample entry from the logs.. 09:31:49:709 AM com.adventnet.nms.store.NmsStorageException: You can't specify target table 'managedobject' for update in FROM clause 09:31:49:709 AM at com.adventnet.management.transaction.ConnectionPool.executeUpdate(ConnectionPool.java:1791) 09:31:49:709 AM at com.adventnet.nms.store.relational.RelationalAPI.executeUpdate(RelationalAPI.java:638) 09:31:49:709 AM at com.adventnet.nms.topodb.BulkOperationsHandler.executeDeletion(BulkOperationsHandler.java:933)
Change OpManager Layout?
Is there a way to change the actual layout of the snapshot page for each device or for a specific type of device? Also, can you replace the graphs for cpu/memory/disc utilization with custom graphs from our own mib?
strange port on our managed Switch
hi, OpManager is running and successfully managed all the device that we wish to monitor in our network, but the strange thing is that with our 3com switch. our 3com switch only has 24 ports on it but we're wondering why in OpManager, it shows 30 and more switch. is there any explanation why this things happened and how to configure the OpManager in order to monitor the right port of this switch. Thanks!
Problem in running Op Manager in Windows
It's my first time downloading Op manager, but after installing it I can't run it, even I have no idea how to start it. When I run Op manager web client it shows web page which says: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, admin@india.adventnet.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information
Availability
I have 2 servers that are showing as down in Today's availability. It has been showing this for the past few days. These servers are not down. The Memory, CPU, and Disk Utilization gauges seem to be functioning correctly, but the availability does not. What do I need to do to corrct this.
Problem with Email notifications
I have 2 problems with email notifications. 1. They were working but they have stopped. 2. Can these notifications be sent to multiple addresses, if so how?
Polling retry, reports
1. Is there is global option to change the number of polling retries before sending out the error in the OpManager. I know that this is there in Applications Manager. 2. Can I configure/customize to add more items in the reports ie., currently it lets me add only devices for reports... can I add service monitors too? Thanks.
DCOM errors and server status down?
Hi, When the OpManager server is trying to contact clients that aren't available, I get a DCOM error from the OpManager server and this flags the server to be "problem". Is there any way around this? I think the DCOM is for WMI access. Thanks, Simon
No firewall bandwidth graphs since upgrade to 6.0
Hi, Since upgrading to 6.0, I don't get any bandwidth graphs for my PIX firewalls any more. The bytecounts seem to be collected, I just get a blank page when I try to view the graphs. If I view the source, all that's there are some <map></map> tags containing <area> tags. There's nothing else. thanks, alec
DNS Check
We have two servers defined that run djbdns (tinydns). When we defined them OpManager does not "see" the DNS service. Is OpManager looking for DNS on the TCP port instead of the UDP port?
Trap Receiver
Is there a way to save the trap data to an SQL database? Great Product! Thanks.
IP Address ,mac address scanning in the LAN.
IP Address scanning with mac address in the LAN.With the range of ip address given,the tool should give info about ip address assigned pc name as well as corresponding mac address of individual pc or other manageable devices.
Cisco Content Switch
Not sure were this question is to go, but Is there support for Cisco Content Switch? Is there future plans to include this if they are not already?
Showing link between switch port and device
When a end user device is powered down, OpManager generates an alert showing the port on a managed switch as down, but does not report the end device. Is there any way of show both? Is there a way of connecting the two togetter?
Monitor several subnet
Hi, I would like to allow another team to monitor their in our group data center. Those server are locate in several subnet. Is it possible to do it? I know it can use "business view" but I don't want to do it one by one. Because they have many servers locate in several subnet. Pls help. Sam.
view cpu utilization multi-processor
the view CPU utilization OPMANAGER is not the same with use Windows Task Manager
Network Interfaces greyed (Linux Server)
We have a Linux Server that has 2 physical Network interfaces. One of them is greyed (with a black diagonal slash). How can we enable the monitoring of this interface? The other network interface is monitored perfectly. Thanks, Saymen
Working hours monitoring
How do I set specific devices to be monitored only during working hours ?
CPU Usage (5 mins avg)
Hi, this Cisco Resource Monitor releases "Error!" when i click in the Admin tab\Monitors\Resource Monitors\Cisco Monitors. Also, in the Switches Snapshot this Monitor appears with a Threshold defined, and i never configured this. Thanks for your help. Miquel
Event log rules
Hi, We are currently testing the event log functions, but apparently they are not working, i tested it by stopping the automatic update service in windows, and configured the corresponding event log rule in OpManager, event id, source etc. I have also included a notification rule which triggers an email action. I started and stopped the Automatic Update service a few times now, but no email alarm from OpManager. Any idea's?
Antivirus Monitoring
Hi, I'm having some problem finding a solution how to keep track of the pattern version of my servers using Opmanager. I'm using Symantec Antivirus Corp. edt. and have configured the AMS service to send SNMP traps to the probe. but all I can do with the Trap Prossesor is set an status for the event (Warning, failed, clear, etc.) The function I want's are like a tag/String that the snmp trap can update. So I can easily se the time of the last "Update pattern" Trap i received from the AMS service for
Monitoring virtual memory
Can OpManager monitor virtual memory? If so, how would I go about setting this option up? THanks
Error Parsing MIB
Hello, Getting this error: Error parsing MIB:NaiComplete.mib Trying to load the McAfee MIB file. Thanks in advance, Rick Chandler
Schedule reports problem
Hi, I'm testing OpManager 6 , i like it ! but when i schedule a report , it works but no mail notification is sent to the email address indicated. The mail server parameters are good, and i receive alerts from normals events. thank's :?
OpManager upgrade
Hi TherennI have just done an upgrade of our OpManager to latest version.nnAfter the upgrade it just stopped working and I have not been able to get it working at all.nnOur copy has been previously upgraded from Version 5 to 5.5 and then to 5.6 beforehand.nnIn the wrapper.log the Error "Failed to Establish connection to Web Server. Gracefully shutting down OpManager"nnWhat files should I look in to dig into this deeper?nnCheersnnA.
No Standard Reports available at all.
Hello, I have Opmanager 6.0 with the latest hotfixes and the standard rerports are showing "No Data" I can run custom reports and all is fine, all my devices have blue stars on them. This is on a standalone OpManager machine after the problems I had running OpManager on a machine with another MySQL application. Any ideas? Thanks, Adrian.
Linux admin client / business views?
Hello, We'd like to setup business views for OpManager. From what I've read, we need the Admin Client to do that. The problem is we don't have all the rpm's loaded on our Linux box and we don't have don't have any x-client software. Is there any other way to configure the business views? Can we install a windows client/server and somehow connect to the Linux box? We have lots of PC's that we could do that on. Thanks, Frank
OpManager Server will not start in Fedora 3
Every time is try to start the server I get this error. "Failed to establish connection with web server. Gracefully shutting down OpManager." Then every thing starts to shutdown. I am running Fedora 3 and the latest version of opmanager. Corey
unmanaged devices turn back on?
no other administrator turns my devices back to 'manage' but yet every wed they seem to reenable? (rediscovery is turned off for these devices)
Removing OpManager 6.0
HI, I installed OpManager 6.0 on my windows 2003 enterprise machine and then uninstalled it. Now when I install 5.6, it installs successfully but at the end error come �Unable to start OpManager as a service� . In services Manage OpManager service is in automatic and started state. When I try to run OpManager client, it says �check if server is running�. I believe that version 6 is not uninstalled completely and it has still occupied the system, because when I again tried to install 6 it installed
AD Store on primary DC missing info and speedometer
As shown in the following screenshots my secondary DC has the requested info and speedometer shown while the promary DC does not have all the requested info. Both use the same admin account in domain\username format. Both have ntds.dit files on the "C" drive. I've done refreshes/rediscovers several times and the AD dashboard has been installed for 2 days now. Any idea why the N/A under used disk space and the lack of the speedometer? chris
Next Page