Pls Help:Network location needed (Currently it is IP Adres)
I need to report on network location/country/region wise network traffic. Currently they are given in IP addresses. Is there any way to do this??How can i convert IP address to get the country/region?? Please help me if you have any clue.
Time Sync Override
We have a need to analyze historical netflow data that has been recorded as raw UDP packet data. When replaying the netflow udp packets into NetFlow Analyzer it appears that the data is rejected because it is not synchronized with current time. Is it possible to disable or override the router time synchronization check inside of NetFlow analyzer so that old data is processed and added to NetFlow Analyzer database?
Can't start Netflow 7
Hi. I have Netflow installed in a server with Suse 10. Today I have to restart the server. Now I can't get started the Netflow service. I go to the init.d folder, and type ./netflowanalyzer start, the program starts, but I can't access to the web interface. It says that the connection fails or the connection was reset when it was negotiating. And after a few minutes the service stops. I try also with service netflowanalyzer start, and the same thing happens. I really don't know what to do, and I'm
NFA failing to show Application and Conversation tabs
Hi, we are currently testing NFA as a solution to monitoring our routers, in this initial test we have used a HP Proliant DL380G4 with 3GB Ram, 306 GB disk space for NFA hardware Raid 5, on a RedHat Enterprise Linux 5.2 i386. The system has been tuned using values from guide, mysql has been tuned to 2GB Ram, and java parameter has been set to 1024 as explained in tunning guide. Record count has been set to 10, trying to get things faster. NFA running as a non privileged user. Currently 2 Routers
Netflow Analyzer 7, Radius and dynamic IP tracking
Have question about tracking dynamic ip traffic. Here is currently how we are setup. We have two static pool subnets, 2 dynamic pool subnets, Netflow enable and tracking, netflow analyzer up and running. Customers radios use a radius server to authenticate through. The problem I forsee us having as far as tracking bandwidth and such is that the dynamic ip's will change and will be assigned to someone else and thus tracking will be useless for that person as the ip will belong to someone else. I know
Raw data storing
how to do more than 30 day raw data storing??? I need ~ 60 day..
TCP FLOWS
Hello everybody, Is there a way to obtain the number of flows or Tcp connections established for a conversation ? Tks for your Help
How can I see the Netflow traffic across NAT?
Hi, I want enable Netflow on router Cisco 2800 series that use NAT dynamic. I configured Netflow and I see the cache flow traffic but I cannot to send this traffic to NetFlow agent that it is on private Network (I don't reach the IP address private). Could you help me, please with this? Do you have any idea about this? Thanks a lot for your help.
Change the datadir
Good Morning together... Is there a way to change the data directory of NetFlow Analyzer 5.5.0 Build Number 5503? We installed the programm on the local disk C:\ but there isn't enough space so we added a new disk device and we wanna have the data files on this new hard disk... Thanks for answers and enjoy the day :) Greetings .michi
Show me usage
Hi! Sorry my English is not so good! Is this program able to show me the usage of every user in my router? Smofy
How to change from trial to free version?
Is it possible to use the free license instead the trial one before the 30 day license expires? I would like to start using the 2 only interfaces license and not unlimited version to see the differences and see if I need to upgrade or not. Thanks!
Reset admin password?
Hi, I am unable to login as admin or guest. Is the a procedure to reset the admin password please? E
Virtualise Netflow on VMWare
Hi, There are a couple of postings already for running NFA on VMWare. Is there anyone out there that is using it this way successfully? We're currently running around 120 interfaces, with a flow rate near 1500 per second. Our current hardware is not up to the job now (HP G2), and we're upgrading the network at the moment and will require additional interfaces, and more disk space (currently at 240Gb, for only 3 days RAW data). We're trying to consolidate these backoffice apps onto VMWare to avoid
Activate Desktop in NETFLOW
I have been testing NFA7 for routers , and trying to activate desktop and server for NFA.pls advise what to config in desktop or server . Or how shld I add devices in NFA. I have desktop that desktop and server manage by OPMAN, having activate SNMP on devices. Many thanks
JVM exited unexpectedly
Hi everybody, I have a problem starting the Netflow Analyzer. It fails to start the mysql Server STATUS | wrapper | 2009/01/14 09:14:50 | Launching a JVM... INFO | jvm 5 | 2009/01/14 09:14:51 | Wrapper (Version 3.1.1) INFO | jvm 5 | 2009/01/14 09:14:51 | INFO | jvm 5 | 2009/01/14 09:14:51 | This copy is licensed to INSERM INFO | jvm 5 | 2009/01/14 09:14:51 | INFO | jvm 5 | 2009/01/14 09:15:39 | Trying to start MySQL server failed ERROR | wrapper | 2009/01/14 09:15:39 | JVM exited unexpectedly. FATAL
cbqos graphs stop after changing cbqos on router.
I've changed the policy-map on the router and now I can't get any graphs for the cbqos on it. I've tried to disable and re enable cbqos graphing within Netflow analyzer, but still not working, Cacti is still getting good info after changing back to original setting on router. Do I need to clear any settings on the server before the cbqos is graphed again. This is inbound on an interface cisco7301. Regards Mark
HP ProCurve 5412 sflow to Analyzer
I have 4 hp procurve 5412zl with fiber uplinks and 24 10/100/1000 ports in each module A through J. I want to monitor the total traffic on each of these switches and be able to drill down to the indvidual workstation on my network. I enabled sflow on my procurve for each module but now every port is showing up as an interface. The two problems I need to work through are one how do I know which interface is the fiber link to see traffic and only monitor that. If I monitor ever port that is over 900
Differance of graphic
Central router is Cisco 7606. I have 2 programmes for analyze traffic: "Cacti" and "NetFlow Analyzer". And I have very big difference in graphic for interface. Example Vlan 80: -------------------------------------------------------------------------------------------------------------------------------------------------- It is from NetFlow Analyzer -------------------------------------------------------------------------------------------------------------------------------------------------- And
Move off MySql
At one point there were discussions that the netflow product would move off mysql to another DB. Has there been any progess made on this? I need a backup stradegy for a db of about 150gig and mysql does not lend itself to an easy backup.
In the Extreme 8800 Series, Out traffic is not displayed.
Dear all, In the Extreme 8800 Series, Out traffic is not displayed. So we attached snapshot. We wants solution. Thank you in advance. Ko Young Suk Telemant corp.
Interface Group Utilization reported shown incorrectly
I'm using the Enterprise Edition of NFA. On the "All Devices" page that shows all of the configured interface groups, the bandwidth graphs are showing incorrect percentages. On the "all devices" page, it'll show a group of serial interfaces using >100% of the bandwidth at 3Mbps, but the group is configured for 22Mpbs. The "description" of the interface group shows the correctly configured bandwidth. If I drill down into the group and show the Utilization graph, it shows correctly, also. Only the
NFA 7 reported link speed incorrect
I am new to NFA and have just installed v7. During the trial period, I didn't see any problems with the bandwidth usage being reported, but after making traffic changes on one of my main links, NFA is reporting impossible numbers. Example: Yesterday, I moved a lot of additional traffic onto a core T1 link in preparation for some network design changes. Standard 1.54mbps pipe handled an Adtran 4305 router running AOS v17.02.03. While downloading a large update file through this T1, NFA reported a
A question about CISCO router interfaces
Hello. To collect detail data from cisco router I have to enter some commands, and on of them is: #interface gig 0/0 # ip route-cache flow Question: if there are a lot of subinterfaces Will I have to enter this command for every subinterface or it will be enough to enter this command to main interface?
number of packets
I have increased unicast traffic causing high utilization of my routers. I am using netflow for info on traffic, but ... is there a way to see number of packets in netflow analyzer instead or together with bytes. I am trying to find which traffic takes how many packets. br
wahy don� open port 9996?
Ning�n enrutador est� exportando actualmente paquetes NetFlow / sFlow a NetFlow Analyzer. hello: pardon by my English evil. I installed the network to analyser 7, I believe that me this open port 9996 in the PC with Windows XP (firewall is deshabilitado) copy show IP cache flow, my IP addres is 10.10.7.5. Some idea? IP packet size distribution (58803 total packets): 1-32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 .007 .353 .116 .057 .034 .018 .002 .003 .000 .000 .001 .000 .000 .000 .000
64<->32bit replication / Win<->Linux collectors?
Regarding Enterprise Edition, is there any issue with running the main server on a 64-bit Red Hat Linux machine and having the secondary server on a 32-bit Ubuntu machine? Will the MySQL replication still perform as usual? Also, is there any issue with a Windows-based remote collector reporting to a Linux main server? I wouldn't expect any, but just want to make sure. Thanks!
nfa6.5 enterprise 64bit: utilization alert
Hi, all over the day i get emails about utilization alerts of an interface. But this can't be right. We have a bandwidth of 34mbit, which i configured in nfa, too. I configured the treshold alarm with 90% 1time 15minutes. But if we have a utilization of 50% we get an email with an utilization >100%. We have this problem only with 1 interface. All other devices/interfaces are ok. Here is one of the emails i got: Message : Total Utilization is 135% AlertProfile Name: tres-so/go Severity : MAJOR Time
7.0 Pro Plus upgrade stuck at splash screen
After upgrading to Pro Plus 7.0 my NetFlow halts at the splash screen. The blue line that states "Starting Netflow Analyzer" is at 95% and has been for 12 hours. This is the 1st time starting the program since it was upgraded from Ver 6.
NFA doesn't recognize router's interface with wccp enabled
Hi all, Im using NFA 6.5.00 with build number 6500. I have a router with wccp enabled, used for redirecting to cisco waas. can you guys help me out ? fyi, the alerts notification also marked with "72", while i haven't configured any alarms threshold. wish to hear you soon, guys
Subject of mailed reports changed after upgrading to 7002
Hi, before the update: "Report From NetFlow Analyzer VFB weekly" after: Report From NetFlow Analyzer" -> The report title is missing Any chance to revert to the old behaviour? Greetings Carsten Blume
Netflow Analyzer update from 6 to 7
Hi I noticed that this has been posted before, but it was in march this year without any real solution. Thus the repost. I am trying to update our Adventnet Netflow Analyzer from 6.0 to 7.0. Going through the steps outlined in Service Packs guide, the output I got was : /etc/netflow/NetFlow/bin$ sudo ./UpdateManager . sh backup has been done .: 44: setcommonenv . sh: not found From the last post regarding the same error, an output of ".setcommonenv . sh" was requested. I executed the same file but
Total Uninstall of Netflow Analyzer 6 EE
Hi, Wanted to uninstall NFA EE, Removed Installed Folder and Registry entries still no luck. When i install 6.5, it detects old installation ask to Remove?? I know there is a total cleanup exe available and please help me to get that. Manu
more than 10 day in troubleshoot report
Hello ! We use your free version "Netflow Analyzer Professional 5, 5.5, 6" and have found the following bug : while generating a report in "Troubleshoot" mode for a long period of statistics (for example longer than 10 days) several data records are missed. Please, see attached examples : 1.jpg - the report for a period of 10 days, complete set of data can be viewed successfully 2.jpg - the report for a period of 11 days, the data are missed 3.jpg - the report for a period of 2 days, proving the
Peaks in Graphs and Raw-Data
Hi there, we are currently using the Free Version of NetFlowAnalyzer with a Cisco 12000 with 2 Interfaces. We have different counters, one of our Provider, one via SNMP (Cacti) and of course the one with netflow. Normally we have about 50MBit - shown on all Graphs. But in last time we get as much requests that parts of our network is down (DOS). We can identify the source IPs an taking action against. But if I look at the Graphs in the netflow analyzer, there are many big peaks. All other Graphs/Coutners
nfa6.5 enterprise 64bit: No data available...
Hi, i have the following problems: if i look on the server dashboard i get the message: No data available for the last 1 hour. if i choose a router in the device group, all the devices have 0.00bps traffic in/out. But if i choose an interface i can see traffic in/out. if i open the collector-frontend and select a router, i can see the traffic too. I tried a reload of the server/collector --> without success I restarted the system --> success for about 1/2h --> traffic again 0.00bps Can somebody help?
The server encountered an internal error
Cant see any data (speed/utilization/packets) in IP traffic. Getting below error. The server encountered an internal error () that prevented it from fulfilling this request. Please help to resolve
Unable to save a new billing plan
Hi, I've just installed the new SP for NFA and upgraded to 7002 from 7001 and also I installed the Volum based Billing addon. all well and good, but when I try to add a new volume based billing plan and save it it does not register and displays "No Bill Plans has been configured" after I click the Save button. any ideas about this? -Edvin
some design-improvements for nfa 6.5 enterprise
Hi, I have to write my suggestions for improvement here, because your FORM at manageengine.adventnet.com/products/netflow/distributed-monitoring/need-feature.html doesn't work. Especially the red line at the verification code is really nasty! we have the nfa 6.5 enterprise 64bit. So here are my improvements: Here are some design-improvements 1. although the collector has an alphabetical order of the devices AND interfaces, the server don't have it! So its really hard to find the right interface.
New to Netflow
Hi All, I am new to NetFlow; ManageEngine Operations Manager and NetFlow Analyzer where chosen in our project for Performance and Capacity management. I have download the Enterprise Edition software from the link provided, but the concern here is should i install both Central Server and Collector on the same machine or install on different machines. We are provided with only one machine with requirements as 140 GB HDD, 8 GB RAM, 2 CPUs. Please advise, as how to proceed further in monitoring 600+
NFA Beginner
Hi, I have installed a Free Edition of NetFlow Anlayzer and would like to analysis the traffic and bandwidth monitoring for at least one interface before we get the new licenses. Can some one guide me what's the next step in order to achieve my target? What changes or steps should be done at router or switch level (with an example), so that the NFA can collect data and represent in reports and dashboard view. Any help is appreciated. Thanks in advance. Kris
Next Page