NO historic data available
My server has been running for quite some time and I have no historic data available. Any hints on what is wrong. This has happened previously and someone from support web-ex'd in and supposedly fixed my issue. Any help appreciated. J
Netflow 7 error
When loading up some of the tabs within a device in version 7, I am getting a long wait and then sometimes the page just refreshes with no change or I get the data. It doesn't seem to coincide with anything else. I searched the forums and found this issue is not unique, but those posts just end with support getting involved. No other info is in the posts. Here is the error: [15:47:04:197]|[03-20-2009]|[SYSOUT]|[INFO]|[38]|: Tx type:process| [15:47:04:197]|[03-20-2009]|[SYSOUT]|[INFO]|[38]|: begining
Problem with NetFlow Analyzer profesional 7.0
Hi, All. I have some trouble with NetFlow Analyzer profesional 7.0 Build 7002. In the log /opt/AdventNet/ME/NetFlow/server/default/log/serverout0.txt I look this: [15:43:37:384]|[03-19-2009]|[SYSOUT]|[INFO]|[25]|: Error occured while executing process :: | [15:43:37:384]|[03-19-2009]|[SYSOUT]|[INFO]|[25]|: java.sql.SQLException: Invalid argument value, message from server: "Duplicate key name 'X'"| [15:43:37:384]|[03-19-2009]|[SYSOUT]|[INFO]|[25]|: at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:1902)|
admin password
I've lost my admin password, can you send the procdures to reset it?
Deledet Interfaces NOT shown anymore
Hi all. I deleted a router and its interfaces from NFA 7 Plus. After that operation, the router was re-discovered (new flows incoming), but only 1 interface was re-discovered. NOTHING changes on router. Any tip? L PS: I deleted the interfaces 'cause the ifDescr wat not retrieved though SNMP parameteres were corectly set up. After re-discovery the only interface discovered was correctly shown with its ifDescr param.
100% Utilization - Analysis
We have had some customers / evaluators who have reported an issue that NetFlow Analyzer is reporting traffic in the excess of 100%. Considering that NetFlow Analyzer reports data with 1 minute granularity, this spikes are clearly noticable, whereas many SNMP based tools show with 5 minute granularity - where values could get averaged out. We are working with some of the customers and also with Cisco's NetFlow team to explain this. Let me first get the most common reasons out of the way so that I
Reports Time
Hi, I'm having an issue with the time printed in the x-axis of all my reports. For instance, if the server time is 3:00pm, all my graphics are displayed an hour ahead (i.e. 4:00pm). how can i solve this?? if you guys need a screenshoot, just let me know. thanks, sandor
Cisco Swithes
Hi, Currently I have Netflow analyzer version 7, I have already integrated it with my core switches Cisco 6500 along with other Cisco routers. I�m planning to change my edge switches from Cisco 2950 to cisco 2970 or Cisco 3560 and integrate them with Netflow using NBAR, is there any restriction on the switch model? Tariq Al Alawi
FreeBSD NFA console install/uninstall
Hi guys.. i got some problems with NFA on my system.. freebsd v 6.0 without GUI (something like monitoring server..) there were no JVM on it, when i try to install NFA.. ./<NFAinstaller>.bin -c script installs NFA normally (without error). after that i try to execute run.sh and get monitor# ./run.sh run.sh: Missing required file: /usr/local/AdventNet/ME/NetFlow/lib/run.jar its expectedly because of JVM absence, but now i cant reinstall/deinstall NFA in <NFA>/_uninst/ i have not file unistaller.bin
Netflow Analyzer Corrupt?
I have been using netflow analyzer for about 1 1/2 years now without a problem. Just recently I have not seen my reports. I cannot open the URL. I cannot open the application directly on the server nor can I start the service. I contacted support who instructed me to run LogZipUtil.bat. I have done this and it sits at an error. As well I cannot find the output to send to support. Any help would be appreciated. Thanks.
Unable to find the free disk space
In my storage settings I see: Unable to find the free disk space Please enter the free disk space (in MBytes) in the NFA installation drive. NFA will determine the maximum raw data period based on the available free disk space and current flow rate. I would like this to be done dynamically but do not know how to get it to see the disk space. Debbi
NBAR & QOS Not reading current values
Hi, We have 4 x Cisco 3845 Routers all exporting nbar to NFA however we changed the NBAR settings on the routers but NFA is still showing the old NBAR information. How can I refresh NFA to show the correct information without loosing any data ? Scott
Radius MS chap V2
I set up radius login, trying to change the protocol to MSCHAPV2 but it won't change, just goes back to PAP. How do I change it to MSCHAPV2?
Cannot connect to host at 8080, was able to yestereday...
Can bring up Netflow client on server via localhost:8080 but cannot connect from other PCs that were able to connect yesterday. "Page cannot be displayed". Nothing has changed that I know of. I restarted the service, no go. Ideas? -Debbi
NBAR
I have a requirement to use NBAR, unfortuntately it is not a possibility to give our Netlfow server the write community for the router I want to query. Does anyone know exactly what changes are made to the router when the write community is provided? It is managed router, therefore I could request a change be made if needed, although if NBAR needs to write to it in realtime then obviously this would not be viable. Any help or advice appreacited. Thanks.
SSL with Netflow Tomcat Server
I am trying to get SSL to work with Netflow server running on a windows 2003 server. I am running Netflow 7 : Version : 7.0 Build Number : 7000 I have followed detailed steps that I found on this sight and still it does not work. I have modified teh server.xml and sample-bindnigs.xml files as well as created the server.keystore file. I cant put the link or the text in this post as I keep getting an error about not being allowed to post URL's. I get this error even when I try to jsut post the text
NFA - Out of Disk Space
Our NFA server has run out of disk space. The server will not start. Can I delete any or all files in the following directory: \\server\AdventNet\ME\NetFlow\mysql\data\netflow Is there anything that I can adjust so that this doesn't happen again ? Thanks.
how to add L3 switch port in netflow
Hi, I have links terminated on L3 switch Cisco 4506. How can I add these ports in netflow? I want to analyse traffice on link connected on L3 switch ports. help appriciated......
Unable to install on Fedora core 9
Here is the error message. sh: /tmp/isjMChXf2/bin/java: cannot execute binary file
problem running on x86_64 machines
Hi, I'm trying to install NetFlow Analyzer on a CentOS 5.2 64bit machine without success. i have downloaded the installation file: wget http://www.manageengine.com/products/netflow/2028821/ManageEngine_NetFlowAnalyzer_7002.bin chmod a+x ManageEngine..... ./ManageEngine... and all i have is: [root@mymachine ~]# ./ManageEngine_NetFlowAnalyzer_7002.bin -bash: ./ManageEngine_NetFlowAnalyzer_7002.bin: cannot execute binary file [root@mymachine ~]# file is recognized as a 32 bit file, which it seems to
tips for enabling NetFlow on an Extreme BlackDiamond
Hi All, Been demo-ing NFA7 and it's great so far with our Cisco router, but getting it working for the Extreme box has been frustrating. Plus the dearth of information on the net doubles the frustation? Anyone have suggestions for getting it working? Here's my Extreme config so far: # NetFlow configuration # NetFlow Filter Specifications Config config flowstats filter 1 aggregation export 1 ports 1:1 ingress match-all-flows # NetFlow Enable/Disable Per Port enable flowstats ports 1:1 # NetFlow Servers
change web server ip
We installed Netflow 7 on a webserver it went to the default ip address of the server I would like to assign it to a secondary ip address on the server, how do I do that? Thanks 8)
Network Snapshot View
I'm using NFA 7 beta. The chart "Top devices by speed" was confusing until I figured out it is IN traffic only. Could you please note that somewhere on the chart and in the documentation? Also, would it be possible in the future to give the option of selecting IN, OUT or a total of both this chart?
NFA on Sunfire 245
Hi, we plan to test the NFA to monitore our Network, but we only have Sunfire 245 to collect the data. Is it possible to install the NFA on a SUN? Best Regards!
PDF User manual
Hi all. Is there a link to a PDF User Manual for NFA 7 Pro/ProPlus? Regards. L
Map NBAR activity to IP address
I've got NFA 7 Pro, and I can't seem to get it to tell me which IP is using eDonkey (for instance). Am I missing something, or is that functionality not in the application. Thanks, Bamf
IP Group and Device Group sorting
Is there a way to sort the Objects we've created in both IP Group and Device Group alphabetically? They are all out of order. thanks
Unlimited version of NFA 7 Pro plus
I am wondering if we can install a second NFA server at no additional cost since we have an unlimitied licenese. Our Current version is well over 10K flows per second and we are exeriencing problems, just looking for a way to split the flows up. Let me know, Thanks!
NFA7 Professional - IP Groups Alerts
Is there a way to define a link down alert for defined IP Groups or will this option be available in a future release?
Netflow Analyzer mib will not import to my NMS
Hi, We have been using Netflow Analyzer 7 Professional for some time, and we've recently started setting up alerts to send and SNMP trap to our NMS. I've tried importing the mib and I'm receiving the following error in my NMS: Cannot load definition for ADVENTNET-NETFLOWANALYZER-MIB unknown type Unsigned32 in module null while loading <MibModule ADVENTNET-NETFLOWANALYZER-MIB src=.\mibs\Adventnet\ADVENTNET-NETFLOWANALYZER-MIB> From this error i Believe the problem lies in the fact my NMS does not
DMVPN GRE Tunnel
Should I be monitoring my outside interface or my GRE Tunnel interface?
traffic report
difference for "Traffic", "Application" and "Destination" tabs on same period.
SFLOW on 4204vl
Have install netflow on a server and configure sflow on my switch. However, I still couldnt get any traffic. Anyway, this is my config on the switch ProCurve Switch 4204vl# walkmib 1.3.6.1.4.1.14706 sFlowVersion.0 = 1.3;HP;L.10.23 sFlowAgentAddressType.0 = 1 sFlowAgentAddress.0 = c0 a8 03 01 sFlowRcvrOwner.1 = scrut sFlowRcvrTimeout.1 = 99,933,024 sFlowRcvrMaximumDatagramSize.1 = 1400 sFlowRcvrAddressType.1 = 1 sFlowRcvrAddress.1 = c0 a8 00 05 sFlowRcvrPort.1 = 9996 sFlowRcvrDatagramVersion.1 = 5
Netflow Analyzer 7 Professional plus flows per second
How many flows per second can Netflow Analyzer 7 professional plus handle?
Analyzer 7 and IOS 12.4(22)
Does Netflow Analyzer 7 support the new Flexible netflow method? ie: flow exporter FLOW-ANALYZER description To Netflow Analyzer destination 192.168.2.16 source GigabitEthernet1/0 transport udp 9996 ! ! flow monitor FLOW-MONITOR description Input Flow record netflow-original exporter FLOW-ANALYZER statistics packet protocol statistics packet size ! ! int fa0/0 ip flow monitor FLOW-MONITOR input ! !
Same IP listed under Source IN and SourceOUT?
I apologize in advance for asking to define SourceIN, SourceOUT, DestinationOUT, and DestinationIN. I know it has been asked and answered on that forum before but I can't make sense of a generated report I reviewed today: On that scheduled consolidated report for one interface, the tables SourceIN and SourceOUT list many of the same IPs, and so do the DestinationIN and DestinationOUT tables. It doesn't make sense to me. If a given IP is the source of the traffic coming in (SourceIN), how can it also
NetFlow Analyzer Professional / Professional Plus 7 released
Hi, We are glad to announce the release of NetFlow Analyzer Professional 7 (Build 7001) and the introduction of NetFlow Analyzer Professional Plus 7. NetFlow Analyzer is available as a single download for both Professional and Professional Plus editions and can be downloaded from http://manageengine.adventnet.com/products/netflow/download.html Professional Plus features will be available during Trial period. Refer here to know the difference between NetFlow Analyzer Professional 7 and NetFlow Analyzer
Restore Netflow Analyzer 6.1 from original downloaded file?
One of the several admins of our Netflow server has deleted the /var/www/html/netflow directory. Is there any way to restore just this directory from the original downloaded ManageEngine_NetFlowAnalyzer_6100.bin file? All the other files seem to still be there. Any help would be appreciated. Thanks! -Stephan
"Port numbers" for ESP_App?
Hi, What do the port numbers refer to when looking at ESP_App? Are they the SAs SPIs? thanks, alec
How to Exclude an IP in NFA6?
Hello, I have an Netflow Analyzer 6 Professional running in Linux Box, how can I EXCLUDE an IP from a certain interface?
Next Page