Netflow Plug-in Data issues
We are noticing that information in the devices tab is not all there. What's confusing to me is that I'm getting 1 min - 24 hour traffic graphs, but anything beyond that is showing as blank. Is it old stale data for the 1 min to 24 hour? or is there a process that's not compiling the data post 24 hours? For example (attachments included): When I go to the device, in the traffic tab I pick last month report the data seems to stop around March 3rd. However if I stay in traffic on the same device
Scheduled Reports Missing for Few Days
Hi There, We have scheduled to send 24 hour bandwidth reports, however we did not get reports emailed for few days and received a reports yesterday. Could you tell me if there is way I could check why emails were not send? Or point me to the location of the log files? Note: There is no issues with the email server and reports are not in Junk! Thanks, Rijath Mohammed
Able to click on L4 or L7 protocal to see more info
hi guys, I just installed the Netflow application on my server, and are getting info from my firewall, so that is all great. One thing I would like to see is, that if I go under L4 and L7 application and here I can see http, https etc but is it not possible to click on https fx and see how and what ip there is doing all this type of traffic? I would like to dig deeper into this kind of information. :) Are I am doing something wrong here or what? :) Frank
Interface Speed configuration issue
Hi, We are using NetFlow Analyzer Distributed version 10.2.5. A issue I've come across is about the router interface speed. First of all, SNMP strings are all set, but routers only get the interface speed at the first time, so if the interface speed changed, I've manually click on the router and click to update router interfaces using the SNMP get. Is there a way to schedule a daily or weekly scan on each router to update the interfaces speed? Secondly, after I manually change a interface speed,
Netflow manage engie fail to start
Hello, Neflow Analyzer is failing to start after a unexpected shutdown. jvm 1 | Database creation failed. Stopping the Server. Please refer logs for more information jvm 1 | jvm 1 | jvm 1 | jvm 1 | Problem while Starting Server jvm 1 | System halted wrapper | <-- Wrapper Stopped
What is the latest version of Red Hat that is supported for a 64 bit NetFLow analyzer deployment? Having failure issues with just starting the server. I am running linux 3.10.0-327.el7.x86_64.
Free Version Testing
Hello. I installed the free version for two interfaces (release in early March). Installed on Windows Server 2012r2, MS SQL 2014, Router Mikrotik. After two weeks of testing, there were some questions: 1. Which file bcp.rll copy (see attachment), and two files of different sizes? 2. In the statistics I see only traffic "Other 100%", no categories for addresses, hosts, etc. On Mikrotik I set up two interfaces: the Internet (ether1) and the local network (arlan), see attachment. 3. Schedule and statistics
New Update
Hi, I have an Netflow Analyzer Distributed edition and on the collector and the server, I always have the message "New Update....... please configure your proxy" The proxy is already configured. And it works (I tested with my IE) 2nd question : I wouldwlike to upgrade my version from build 11000 to 11001 until V12 is available for upgrade. Regards,
NetFlow Analyzer 12 Service Pack 1
Is there set release date for NFA 12 SP1? We've just installed v12 (Build 12000) & from our experience so far, it's not production ready. Thanks
Additional Device error
I have two PaloAlto firewalls configured (2 interfaces on each) to ship netflow data. The first device & both of it's interface have appeared correctly but the second device is not showing up. I've run WireShark on out NetFlow analyzer server & can confirm that we are receiving flow data from both firewalls. We also have a 10 interface license & are only consuming two under the license management page. Thanks
Proxy problem
Hi, I have a problem with my NFA Distributed edition 11 Build 11000. On both collector and server I have the notification "New update..... Please configure proxy." The proxy is configured with good credentials (tested with IE), I tested without proxy and the message is always here. Why? 2nd question : I wouldlike to upgrade from build 11000 to build 11001, is-it possible to do this from application?(I looked at the documentation with stop / start service and the updatemanager) Because I didn't find
NetFlow Analyzer 12 Interface Name
We're currently receiving NetFlow data from multiple PaloAlto firewalls. I've set the SNMP V2c credentials for the device up in NFA but can't seem to get the interface name from the firewall to populate NFA.
Netflow Analyzer Version 12 IP Groups
When trying to add additional IPs to an existing IP group & clicking save, the application throws an internal server error & the group is not updated. This happens regardless of the groups state (disabled or enabled).
Change the default Admin password
Hi, Is anyone else having an issue changing the default admin/admin password combo? I've gone into user management, entered the new password details & clicked save. It says the account updates correctly but the password doesn't change. Thanks
Problem with NetFlow Analyser Essential version on Ubuntu 14.04.3
Hello, I installed NetFlow Analyser Essential on Ubuntu 14.04 and get the following error: [12:09:05:714]|[03-01-2016]|[com.adventnet.mfw.Server]|[SEVERE]|[1]: STACK TRACE| java.lang.UnsatisfiedLinkError: /opt/ManageEngine/OpManager/jre/lib/amd64/xawt/libmawt.so: libXi.so.6: Kann die Share d-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary1(Unknown Source) at java.lang.ClassLoader.loadLibrary0(Unknown
How to get more detailed information about AS/BGP?
Hello, I'm using the new Build 12000 and i'm searching for more detailed information about AS'es and BGP. The only AS information i get, is in inventory -> interface -> AS view in the bottom, which only shows top 10 ASes, but this information is not sufficient. Is it possible to get like top50 oder top100, or generate reports about AS/BGP where source and destination IPs are mapped to an AS? This is very important for ISPs. Thanks & Regards, Denis
Support DELL Switch N1524p device?
Hi, Can NFA support Dell switches N1500 series device? N1524P Firmware 6.2.66 N1548P Firmware 6.2.66 How to configure the flow configuration? Thank you
How to use Netflow Analyzer
Can you explain to me..how to use monitoring cisco router in Netflow Analyzer and haw to add router that can we see the traffic ?
NetFlow License Issue
We just added 10 more interfaces to our licensing to go form 25 to 35. The system shows that our license has been applied, but it still only shows 25 actual interfaces. There are still 10 more that will not show data and said that there aren't enough licenses. See attached screenshots.
Looking for a DDoS detection tool
Hi, I'm looking at using the Netflow Traffic Analyzer to alert us when there is an inbound DDoS attack against our network. Can anyone with experience with this product please advise if it's suitable for this purpose? We have about 5 Gb of inbound traffic so it's important it can handle this (and more up to 10Gig) of netflow data. Any help would be appreciated. Luke
Netflow Analyser 12 with MSSQL Express 2014
Hi all, I can't seem to find the rll files that need copied in SQL Express 2014. BCP.exe is there, but there doesn't seem to be any associated files and the Netflow Analyser wont install without them. Any suggestions appreciated. Thanks
Netflow configuration
Hi all hope this post finds everyone well. I am hoping that someone can perhaps assist me in terms of Netflow analyzer configuration as I seem to be having a bit of bad luck on this. We have configured our Cisco ASA for Netflow and set it to send traffic to the specified ip address we have chosen. I have also setup a machine with the specified IP and have installed Netflow Analyzer onto it and I am able to log into the web front end. I have verified on the Cisco Asa that
Application not Mapped for Cisco Nexus 3K
Hi, I am using netflow linux version build 9860. I am already mapping some applications based on IP addresses with their respective ports but same do not working in newly add Cisco Nexus 3K which added by sflow protocol. For Example i have define Server IP 10.0.0.1 Mapped TCP 1433 as SQLSERVER and its already working on our routers but not working on Nexus3k as showing data on default ms-sql-s . Kindly guide in this regard. Arshad
Support Dell Switch N1500 series devices?
Hi, Can NFA support dell Switch N1524p and N1548P? If yes, how to configure the flow configuration? Tks,
Issue with fetching data for Cisco 7609 routers.
Hello, We have cisco 7609 routers in our network and we have configured it to send cache flow to information to netflow server. I'am able to see the devices are detected and necessary interfaces have been managed on the server, The netflow server shows that it is getting flow from these devices however when we fetch any report for these devices we get a blank report/Graph. What could be the issue? Below is the part of configuration on the routers. ip flow-cache timeout inactive 60 ip flow-cache
Upgrade from 9900 to 10250 question
Should rawcleanup.bat take some time? Also I'm following the instructions to upgrade but it's not clear. There are two files to download. One PPM for 10250 and another for the JVM upgrade to 7. However it then mentions the following. At what point do you update the JVM? The following just appears to imply you just point to the PPM for 10250. Execute the UpdateManager.bat (.sh in case of Linux) file present in the /bin directory. From the window that pops up, click Browse and select the service
Migration Netflow from NFA 9.1 to NFA 11
Hi, Please advise us the steps to flow the Migration of Netflow Analyzer from Version 9.8.6 with Build 9860 on 32 bit database is MYSQL to the new server version 11.0.1 build 11001 on 64 bit where the database is POSTGRES. Thanks, Ramesh
Security Scan on Netflow Analyzer
Performing a security scan on our NetFlow Analyzer server resulted in the following vulnerability being posted: Form with action http://(OMITTED):8080/netflow/jspui/web-inf/j_security_check submits the following sensitive fields unencrypted: j_password Any suggestions?
Netflow licence
Good day We have a netflow plug-in licence however today when I accessed NFA, it showed that we were using the evaluation edition. I have the licence file, however I'm just not entirely sure what directory it should be in in order for Netflow to pick up that we're using the Enterprise edition. I've attached our licence for confirmation. Thanks :) Regards, Mat
How can i view port numbers in Unknown_App?
Hello, NFA 10.2.5 (old UI) How can i view port numbers in Unknown_App?
How to generate the report about the traffic rate between two subnets
I am trying to use NetFlow Analyzer to profile the traffic rate between the server VLAN and end user VLAN. Any one know how to do it? Currently all the servers and end users are in the same building. We are planning to move all servers to Colo Data Center therefore, I would like to estimate the bandwidth requirement between office and new DC. Thanks a lot for your help.
Netflow Analyzer LDAP/AD integration
Is there any feature down the road that will support LDAP/AD integration to maintain single username/password maintenance
Unable to get data from CISCO WLC
We have configured our CISCO WLC with Netflow Exporter and Monitor to port 9996. Added the monitor to the QoS of WLAN and application visibility is on. However, Netflow Analyzer does not show any data. When trying to add a device (in inventory) it throws an error "Missing translation: No interface found.Device Adding Failed". How do we analyze Netflow data from CISCO WLC? Netflow Analyzer does not show any version but the build number is 12000.
Outbond Traffic for Interface is not getting monitored
Hello, We have Cisco 4507 RE with 8-E Sup Engine, we were trying to monitor the traffic of one of its interface, but only the inbound traffic is getting monitored, below is the config enabled on the switch for monitoring netflow. please assist us to monitor outbound traffic. interface GigabitEthernetX/X/X ip flow monitor NETFLOW_M input flow record NETFLOW_R match ipv4 tos match ipv4 dscp match ipv4 protocol match ipv4 source address match ipv4 destination address match transport source-port
NetFlow IP Groups
Hi, Can anyone tell me how many IP Groups are supported with the Manage Engine NetFlow license please? I'm currently running an essential license version 11.0.1 Regards Mike
Netflow Linux Installation Sudden Not Started
Hi, I am using 64 Bit Linux Installation of Netflow Anzlyzer build 9860 and was working much fine but since today morning netflow service was unable to start and give SYSTEM HALT error when try to start from RUN.SH. Attached is the screen shot for the same. Kindly check and guide to resolve this issue. Arshad
Bandwidth monitoring based on IP
Hi, I wanted to ask if your netflow analyzer offers bandwidth monitoring based on IP. For example: I have an router interface with 3Gbps traffic to my customers. I want to see the traffic that every customer's IP generate. Can this be done with netflow analyzer? Thanks Elis
Migration Netflow from NFA 9.6 to NFA 9.7
Hi I want update to 9.7 but the service pack is not available. Where can i download it? Thx
Migration Netflow from NFA 9.0 to NFA 9.5 [SOLVED]
Hi I try to migrate Netflow from NFA 9.0 to NFA 9.5 but i have this message Enter the patch file to install:/tmp/AdventNet_ManageEngine_NetFlow_Analyzer_9_0_0_SP-2_0.ppm Unable to load Disk Space related native library. Exception in thread "Thread-0" java.lang.UnsatisfiedLinkError: getFreeSpace at com.adventnet.tools.update.installer.DiskSpace.getFreeSpace(Native Method) at com.adventnet.tools.update.installer.ApplyPatch.run(ApplyPatch.java:152) at java.lang.Thread.run(Unknown
Require Network Bandwidth Splitter / Allocater
Hi Helpdesk, One of my client requires bandwidth Splitter / Allocator for network . For example users for a particular range of Ip address or all users in a network must be allotted a stipulated bandwidth and should not exceed that . Please notify if there are any tools for that Regards Anand m
Next Page