Managed Engine Recover
Hi team, We have a managed server instance installed in one of our sites, the machine with the instance got disk drive failure, We have the backup of the complete manage engine folder, We need to reconfigure App manage manage server again on the machine and we want to get the same alarms and configurations from the backup folder. please share the way forward to recover the managed server from the backup folder we have. Regards, Joudat Hahmi N
A more complex SQL script to monitor app status on Database Query Monitor
To monitor the status of an app, I need to monitor a value in CONPRM table called PI_HEARTBEAT, that is updated by app each second or so. If value didn't change after a few seconds, we can assume that there's some issue in the app. I have tried something here on database query monitor but does not seem to work, looks like too complex for use on this feature.. here's the script below which works as expected on sqlplus any ideas? SET serveroutput on; DECLARE x NUMBER; y NUMBER; z VARCHAR(1); BEGIN
SQL command not properly ended on database query monitor
I'm trying to set up database monitor query but running into some issues. Trying to run a very simple query as the one below: select 'STATE', v FROM DPAADM.CONPRM where P = 'PI_HEARTBEAT'; But getting following error msg at the top of the page when trying to save: Got ORA-00933: SQL command not properly ended The query works perfectly fine on toad. What is frustrating also is that even after putting in another query copied from another healthy monitor and saving it, at the top of the page it shows
Can't find "Apps" tab under OpManager build 12100 (APM Plugin)
Hi, the title says pretty much it all - under the main interface of OpManager 12100 there's no "App" tab. Given the (obsolete?) instructions found here https://www.manageengine.com/network-monitoring/apm-plugin.html#InstallInstruct it should be present. The binary is running in the server, the Application Manager page is reachable at http://<opmanager_ip>:9090 but it will only allow a login through OpManager. Under Settings -> Add-On/Products Integration the Application Manager tab is correctly configured.
monitoring vm host + removed eth interface
Hi, another case with strange Application Manager. I've got virtual machine with linux which works fine and the machine is a match with existing monitor templates. Unfortunately, periodically strange errors show up saying that there has been network interface missing. I've checked the hypervisor log and vm configuration for any issues but all is working without a glitch. The problem is, I constantly get those errors Acknowledging such alert brings back the host to a green state but but it doesn't
Tomcat + thread usage
Hi, I was wondering how does Application Manager count Tomcat threads? I've got an issue with the monitor output - see below: where total count is 37 VS output from system console where thread count shows 47 [user@aaa]# ps -eLf | grep java | grep -v root | wc -l 47 No matter what number of threads there is, it is alway +10 against Application Manager monitor output. Can you point why these two differ? Another thing is where one can find detailed view about current connection pool settings. But how
Top 5 + redundant monitors
Hi, I'm busy lately asking a lot of questions but I have some issues I cannot find answer to anywhere. I've got Top 5 Linux CPU Utilization and many similar like Top 5 Tomcat on my dashboard. Now, the problem is I decided to unmanage a few of existing monitors, which were visible in those Top 5 containers. Unfortunately, unmanaged monitors are still visible in Top 5, which is odd and logically, they should disappear. Is it by design or is there anything that can be done to fix this? Regards
Application manager stopped sending emails
My application manager stopped sending emails. Could you please help how to troubleshoot this issue
hello
I need your help i have the log of transaccion full, i run the next query ALTER DATABASE @DBName SET RECOVERY SIMPLE WITH NO_WAIT DBCC SHRINKFILE(@DBName_log, 1) ALTER DATABASE @DBName SET RECOVERY FULL WITH NO_WAIT shows me that the log does not exist in the bd AMDB Best regards
I found Problem when I upgrade from 11900 to 12800 about Admin not sync with manage server
I found problem between admin server and manage server Admin Server not sync with manager server and I found insertbulkqueries.sh a lot of process It's Clear when I restart Application manager How to fix and Improve Response time in sync or any help us Note: version 11900 not found this problem but I and my team already update all server to version 12800
Boldface Attributes
I'm new to Application Manager, hopefully this can be easily answered. Why are some attributes in boldface? Example would be the IIS Server monitor has some attributes in boldface and some are not. Thanks in advance for any help.
Application Manager monitors
Hello, I've got a problem with Application Manager monitors which apparently are not take into account of the license and that is quite fine. Unfortunately, there was is an issue where I was trying to change one monitor assignment from 127.0.0.1 to the name of the host on which the Application Manager resides. This action made Application Manager think, the monitor(it was db monitor for mssql) is a new monitor and the count of those "free" monitors went down to 4. Neither changing assignment back
Database Schema
Is there a PDF or help file describing the purpose/contents of each of the database tables? Jeff Denman
need help enrolling URl monitoring
Hello All, I ma trying to enroll some url into application manager . I am able to open url into browser on my managed server without any proxy setting. but when I enroll the same into manage server it showing url as down. please find the attached screen shot for the error
JSON-WSP
Hello, It is possible monitoring JSON-WSP and what the best configuration for this monitor. I see only WSDL type for web service monitoring. Thanks a lot Jan Horáček
Stop Alert for Particular MySQL Monitoring
Hi, How do I stop alert for MySQL "replication failed" I'm aware we don't need the replication for particular server. Root Cause : 1. Replication Failed. Thank You. Regards, Reza
Issue installing APM under Ubuntu Server 16.04
Hi, I'm having a hard time installing the APM plugin (taken from https://www.manageengine.com/network-monitoring/29809517/ManageEngine_OpManager_APM_PlugIn_64bit.bin) in a brand new Ubuntu Server 16.04. I previously installed OpManager Essentials (from https://www.manageengine.com/network-monitoring/29809517/ManageEngine_OpManager_64bit.bin) in /opt/ManageEngine/OpManager - the daemon starts up correctly. I'm giving the desired installation path "/opt/ManageEngine/AppManager" to the binary installer,
IBM MQ Support Pack MS0B is no longer available
Hello, All instructions indicate that to install the add-on for IBM Websphere MQ, we have to download the support pack MS0B from http://www-1.ibm.com/support/docview.wss?uid=swg24000668. However, this link is no longer working, and the support pack does not seem to be available on the IBM website. What is the workaround for this? Thanks.
Moving existing monitor group to another group
Hello. Is it possible to move an existing group as a sub-group for another existing group? thanks in advance... -john
Add insight agent to APM itself on CentOS
Dear support, Please check the following logs: [24 鍏湀 2016 02:19:48][APM_Insight_services_starter][WARNING]: MalformedException com.manageengine.apminsight.agent.exception.MalformedException: ParseException at com.manageengine.apminsight.agent.service.JavaAgentService.sendData(JavaAgentService.java:329) at com.manageengine.apminsight.agent.service.JavaAgentService.sendDataToServer(JavaAgentService.java:260) at com.manageengine.apminsight.agent.service.JavaAgentService.connect(JavaAgentService.java:183)
Publish html file through Manage Engine
Hi, I created a html page from the iframe i retrieved through publish dashboard feature. Few years back I remember placing my html file in manage engine webserver location. Doing so I could access the html within my org. Can you please let me know the location where I can place the file. Regards, Noby
Mobile App for Android - Monitor Groups Times out
Hello, I can use all other features in the applications except for monitor groups. I have even limited it to just one group, to see if it was too complex, and it doesn't load. I get a popup saying it timed out, and then shows no monitor groups. My user has correct settings and can access via webconsole, i have also tried the administrator account, also not working. Any help on this would be appreciated. Best regards, Carlos Shrimpton
Database Query Monitor
Dear all, I am trying to find a solution for following problem: We are using a query monitor to give us an overview about failed transactions from last day. Examlple: TokenNumber Client Time Message 1234 A Jun 23 2016 5:42PM E 2345 A Jun 23 2016 2:40PM E 3456 B Jun 23 2016 2:47PM X 4567 B Jun 23 2016 3:43PM X 5678 C Jun 23 2016 4:07PM X 6789 A Jun 23 2016 4:24PM X that means that the day after it will be completely different: TokenNumber Client Time Message 9876 A Jun 24 2016 4:42PM E 8765
need help to setup dependent monitor
Hello All i want to setup monitoring for urls, where i have 2 different url and alert should be generated only when both are down. can someone tell me how to setup this.
SFTP monitoring returning error. Could not parse response code.
Hello, I am currently trying to set-up an SFTP monitor, but I can't for an error. The error is: Could not parse response code. Server Reply: SSH-2.0-OpenSSH_6.1 It seems that Applications Manager is unable to recognize the server response, which is: "SSH-2.0-OpenSSH_6.1". From the log files (stderr.txt) I find the following exception: at org.apache.commons.net.ftp.FTP.__getReply(FTP.java:315) at org.apache.commons.net.ftp.FTP._connectAction_(FTP.java:364) at org.apache.commons.net.ftp.FTPClient._connectAction_(FTPClient.java:540)
Solution about monitor htttp(s) urls request parameters with dynamic value..
Hi, I would like to create a url monitoring, where a value of the parameter is to get in as the day of the year. every day the value has to change.... how can I do?
In version 12710, the username and password are not being populated in the edit page of Windows monitors, when we use windows local users
In version 12710, the username and password are not being populated in the edit page of Windows monitors, when we use local users Example of user with problem: "130.10.92.192\universe". This is the message in Chrome: In Firefox is similar: "SyntaxError: malformed Unicode character escape sequence"
Host name (parent) for MSSQL monitor
How can I change hostname/parent for MSSQL monitor? For every other I can just edit monitor and change hostname/parent while in MSSQL monitor this field is not visible when editting.
facing issue with treshold in script monitor
Hello All, I am facing some issue with threshold set in custom script monitor, I fund that those are getting removed automatically . has anyone faced the same issue. Need some solution as this is causing some failure not been detected by tool as threshold are not in place or changed to some random value.
Can't copy and paste new monitor
Maybe it's just my inexperience, but I can't seem to get copy and paste monitor to work at all. Not a huge deal normally, but I have a cluster of identical servers that serve up a java application that gives us specific data via mbeans. I want to duplicate the monitor I created on 1 server to also monitor the other 11. We are monitoring about 8 of the mbeans out of several hundred, so to go back and recreate the monitors without copy and paste is a task that may take weeks...days at minimum. Copy
Enviroment: VMware ESXi 6 + Virtual Machine RHEL 7.
Hi, well we have a ESXi with a VM RHEL 7, and we monitoring the vCenter, so, when configured Guest OS, AM send the error: The Monitoring for the Node is not Supported. My question is, when are be supported rhel 7 for virtual machine? In monitor type Server Linux, working fine.
Regular Expression APM Build 12710
Hi, I'm using regular expression in file monitor, but is no working. My regular expression is: ORA\-|Error\,\s+error|Deadlock|Lock|Timed\s+out|TNS\-|Fatal\s+NI\s+Connect but the pipe character is not working I'm using build version 12710
What's new in Applications Manager
We recently released version 12.8 of Applications Manager. The focus in this release was to expand our NoSQL portfolio. Here is a quick look at the highlights of version 12.8: Support for monitoring Apache HBase Apache HBase is a distributed, NoSQL database used by many businesses to process large amounts of data in real time. With Applications Manager, you can monitor the health and performance of Apache HBase by tracking key performance indicators (KPIs) related to the HBase Master and Region
Memory Usage issue on a Linux Server with DB2 LUW database installed
We have Linux server with DB2 LUW database installed on it. Total memory allocated for the server is 256 GB, out of which 234 GB was allocated to the database. Daatabase has the automatic memory enabled, current allocation is 234 GB. When i checked in the server, the free memory avaialble is only 345 MB. Where as in the app manager, Memory utilization is showing only 1%. When 234 GB out of 256 GB is allocated to database in the server, why the server memory utilization is showing as only 1% used.
QUESTION - It is possible to create a downtime schedule with "Start" on a past date and "End" on a future date, and it apply?
Example: 1.- We are at 09:20 a.m 2.- We create a downtime scheduler for a monitor that starts at 09:00 a.m. and ends at 10:00 a.m. Will this downtime scheduler apply? If the monitor goes down at 09:40 a.m., it will appear an alarm, or will apply the scheduled downtime? Regards, Luis Lorenzo
monitor is currently in Unmanaged state- but alarms sometimes
Hello, We have a couple of Java Runtime monitors in an "unmanaged" state. However, every once in a while they will alarm for being down. Our fix is to enable the monitor- poll- then place back into an unmanaged state. We don't want to delete these monitors, but they are not currently in use. Is there something else I should change for a JavaRuntime monitor if I un-manage the monitor? Here is our current process to fix after we get an alarm on a unmanaged device. The process is a little involved
License Error Code : ERROR CODE : 535
After having a hard drive fill up that Application manager was installed on we cannot get the application to run. When checking the start up logs output we've found that it is saying that our license file is invalid and the application fails to load the free license as well. If the license does not load will the application halt completely? Where is the license file stored? I can't currently check the license to validate if the file is corrupt but our current license should be valid until August
[mysql5.7.x] Note show Database Detail & Get Table Locks & Request Detail
Dear all, My AM have a bug when i add new montior with MYSQL vesion 5.7.11 and version 5.7.12 You can see with picture below: But , I can add MySQL with version 5.6 I don't Know how to fix it, i think we need to enbale some variable on MYSQL 5.7.x? Let 's guide to me for the issue Mnay thanks
MySql Port connectivity
Hi Fellows, can we monitor MY SQL port connectivity (3306) using Manage Engine's application manager . Regards. Joudat Hashmi
Monitoring of availability of processes for the Linux monitoring under SSH, is not working after update to 12710
Last night we have update from the 12500 version to 12710 version, and detect that the "process monitoring" in the Linux connected by SSH are not working. and this affect to the Linux health however, the process are started, and in the process list it does appear: If we "Delete" de process and Add it Again, it still doesn't work. We need a solution, please. Regards, Luis Lorenzo
Next Page