CLI API not closing sessions correctly
Hi, I have discovered an issue with the CLI API and am wondering is there a fix/workaround for it? The issue is the close() method in the CLISession class sends a FIN,ACK message to the devices. This is supposed to be just a FIN message if it were to adhere correctly to the standards. Most devices however ignore the incorrect flags and exit the session. However some devices are stricter and do not close the session. These are Cisco devices and the result is that the line stays up on the device and
MS SQL 2008 R2 on windows 2008 r2
Is this supported like a backend for opmanager, ncm plug-in and nfa plug-in
How can I map by zip code
We have over 350 sites nationwide and we would like to have a US map on the OpManager dashboard that would have each site in it's correct location with a dot that would change with status - red yellow or green dots. We have zip code data for each site and would like to place them on the map by zip code instead of having to manually place each site. Can anyone help me with a method to do this?
Device image
Hello, I'm new in APManager and even after upload an image to the correct directory ("\ManageEngine\OpManager\webclient\common\images\DeviceImage") the Business View doesn't show the image I have just uploaded. When I use a standard image the BV shows the image normally. It should be something easy to fix, but after change the image properties some times, I give up.
Install OP+NFA plug-in+NCM plug-in
Hello I want to install this set in one VM ( win2008 ) with a MS SQL backend on another. I found on the site that NFA plug-in uses the same SQL instance ( that of OPManager ) but nothing about which instance is used by NCM plug-in. Please provide this information. Thank you very much
Create Device Templates based on non OID data
Currently a device template can only be created by using an SNMP OID. While that makes sense and makes scanning more intelligent it does limit the usefulness of the Quick Configuration Wizard. Example: I have 20 servers in my PeopleSoft App Server pool. I need to monitor the integration broker message queue on these boxes and only alert the PSFT team if they are too large. The OID of these systems is going to be of a normal windows server so I couldn't just apply it to my peoplesoft servers,
AIX interface not show
I have 3 AIX server that I monitored using OPManager. I have successfully add the server in to OPManager but in the interfaces section the interface not show, when I try to rediscover it says that unable to rediscover. The credential tes was passed for both SNMP and CLI. What can I do to showing the interfaces ?
Response time
Hi all, After 3 months of testing... i'm sooooo fed up Here is my configuration : Virtual Machine running windows 2008 R2, 8 vCPU, 16 Go of RAM. with MySQL db installed locally on a second HDD When i would like to display the virtual device in infrastructure snapshot (and actually all other snapshots...): here is the response time i got : it is IMPOSSIBLE to work like that,.... every click on a link take a LOOOOOOT of time. After many search, nobody is able to help. I tried a repairdb,... nothing
Add traps from multiple MIBS
When adding traps from imported MIBS you can only see a small number per screen and they have to be each processed manually. Could this list be expanded to show more MIBs in a single screen and have check boxes added to search more than one MIB? If you have a large number of MIB's this can take a long time. Another thought would be to also add the option to search and import traps simultaneously when the MIB is being uploaded.
Notification on alert acknowledgement
WE would like to have the ability for an email or other action to be triggered when a technician acknowledges an alert. This would inform my staff that someone else is addressing the issue and they do not need to get involved.
New Infrastrucutre View + Device Template
I am trying to add a new Category, and then create a device template to be applied to that category. I can get this far, but I don't see the ability to add Windows Service monitors inside the template. Am I missing something? Thanks Shaun
Configuring Failover for OPmanager version 8
After successful installation of Primary/Standalone and the secondary Server, The 'startMysql.bat' in the 'bin' folder shows CHANGE MASTER command prompt.
How to minotor status of the OPManager Server itself.
Over the weekend i just notice there were power failure happen few times because of building maintenance. So my boss need to know the status/info of the OPMAnager itself, like at what time the server down, or healthiness of the OPManager Server. I suppose it should have by default or i just cant find it. Please advice. Bravo OPManager,my boss start to pay attention about this products. TQVMuch
Issue with OpManager Syslog server
Hello, I'm currently evaluating OpManager to determine if it is the right product for our company. I have added devices for monitoring, however I discovered there is an issue with the syslog server. It reads as follows in the OpManager console : "SyslogServer Failed to start due to Address already in use: bind for the port 514. Click here to change the port." Any help would be much appreciated.
Device not reachable V8
After installing V8, I get the message that the Device is not reachable. I had no problems like this in V7. I have ran discover and it does not find my router. I can see the MIBs for the host from V8. I thought it might have been a machine problem, so I reformatted my server and we still have this issue.
How to add column about disk partiation usage?
I want to check server 's cpu/mem/disk everyday. how can i list them in a window thks I am using opmage8 trial version.
Integration con UTMs Checkpoint and Firewall Checkpoint.
I have problems to visualize components to UTM EDGE VPN version X, N, S. I cannot recieve information about snmp protocol from these devices. You can help me to obtein the best configuration to work with these devices. And another problems is I cannot work with Firewall Checkpoint RS 1070 Appliance. You can help to monitoring, memory, processors, interfaces and another components. Thank You Pablo Reyes
Custom MIBs to Monitor Performance of Nortel & Techroute devices.
If any one of you have identified the MIBs & specific OIDs to monitor the below device models (or a subset of this list) and imported into OpManager for monitoring, please share it with us. Nortel 8610 Switch Nortel 4550T Switch Nortel 4250 Switch Techroute SR 1001 Router Techroute 2633 Thanks in advance. - Umanand. ManageEngine IT360 Team.
Health check report
Dear sir, Pls help me out, How to we get Health check report all (CPU Utilization, Memory Utilization, Disk Utilization and event log on single report. Thanks
Specific field in opmanager report
Hello, Is there a way to build a report based on Availibility and Response / Devices Availibility with additional colums (not only Device name, total down time, availibility percentage). I would like to add device Notes \ comments, floor or other fields associated to the device, in a report. These fields are available when configuring alerting and I would like to use them also in reporting Is it possible ? Thanks sebastien
OpMgr 8811 move issue
Hello, I'm trying to move Opmanger 8811 from a 32 bit Win 2003 server to 64 bit 2008R2 server SQL database. We're also moving the database from SQL 2000 to 2008. I've copied over the Opmgr directory from the 2003 server to the 2008 server. When I change the name of the 2008 Opmanager directory and replace it with the 2003 and try to connect to the SQL 2008 db I get the error No Driver Jar is found. I am able to connect to the SQL 2008 db using the Opmanger folder originally installed on the
Monitoring Juniper
I talked to the support team regarding the Juniper devices and realized that OpManager currently does not have Juniper MIBs. So, either we have to manually download and install each MIB which is very time consuming or wait for the next version that contains all the Juniper MIBs but there's no ETA. Does anyone have any additional information or updates on this? I'm so disappointed because I was told Juniper devices are fully supported with OpManager before the purchase and now I'm told they're
Juniper SRX240
If you want to monitor Juniper SRX240: MIB: JUNIPER-MIB Temperature: .iso.org.dod.internet.private.enterprises.juniperMIB.jnxMibs.jnxBoxAnatomy.jnxOperatingTable.jnxOperatingEntry.jnxOperatingTemp.9.1.0.0 .1.3.6.1.4.1.2636.3.1.13.1.7.9.1.0.0 CPU: .iso.org.dod.internet.private.enterprises.juniperMIB.jnxMibs.jnxBoxAnatomy.jnxOperatingTable.jnxOperatingEntry.jnxOperatingCPU.9.1.0.0 .1.3.6.1.4.1.2636.3.1.13.1.8.9.1.0.0 RAM: .iso.org.dod.internet.private.enterprises.juniperMIB.jnxMibs.jnxBoxAnatomy.jnxOperatingTable.jnxOperatingEntry.jnxOperatingBuffer.9.1.0.0
Memory Utilization by java.exe
After i would say a week of uptime i notice that i am not getting on the home page any type of "Servers with high CPU..." or Routers with high Memory ..." and at the same time i no longer seem to get any notifications of faults. During this time i also get no reporting on interface utilization ect... I then remote into the server and notice that java.exe is using over 1GB of ram. The processor seems fine but memory only has around 50MB free. This is obviously the problem but i am unsure if java.exe
SNMP and SUSE 10/OES2
Has anyone had any luck getting SNMP monitoring to work with any of the SUSE 10 or OES2 distros? I've tried a few things on my test server and cannot get it to work.
Differences between OpManager Professional and Enterprise
Hi, I searched on your web site, but I didn't find the difference between the OpManager Professional and Enterprise. I mean in term of usability, user interface and so on. For example: do I need to log-in on each probe to do the set-up or I have to access only the Admin server? Thanks.
formula of Traffic in Opmanager
Hello everyone, could you please tell me how can I get traffic via SNMP commands ? What is the formula ? I found something on the Internet. It was like "inOctets * 8 * 100 / ifspeed or outOctets * 8 * 100 / ifspeed". But when i tried count it, always i got different result. So I want to ask you what is the right formula thx you
Need to turn Automatic Discovery feature OFF
We are on OpManager build 872; we do not want to upgrade if we do not have to right now. What we need is to turn off the automatic discovery feature. Every time we create a new virtual server in VMWare, OpManager automatically sees it. We want only the ability to add the server to OpManager when we want to. Thanks you
MCM plug-in and OPManager 8812
Hello, I upgraded OPManager to 8812 then I installed MCM-Plug-in but when I tried to access in admin page settings I got waiting on .... in my browser then come back to login page. I tried it from my PC or from server, same result. The back end for OPManager is SQL 2000. I need to set for critical servers MCM, can you help me as soon as possible Regards Philippe
Move OPManager DB from SQL 2000 to SQL 2005 server
Hello, I would like to know what are steps to move OPManager DB from SQL 2000 to SQL 2005. Thank you fro your answer Regards Philippe
Problem with Catalyst 4510R OID
Do anyone have the OID of Catalyst 4510R, i can't configure the temperature monitor. Please help! Thnx & Rgrds
Wath's that mean...
The AuthenticationFailure trap is received from How i can resolve this alarm in Windows Machines???
Administration of snmp trap processors
Would you please make it easier to administer snmp trap processors? With more than 1000 defined traps, it is a nightmare to administer the snmp trap definitions. I would like to have bulk administration for a given OID (add, modify, delete and search) . I would also like to have a couple of extra fields in the snmp traf definition: the name of the vendor and the type of equipment.
Do you have template (OID/MIB) for Webwasher (McAfee) ?
Regards, Sekson
Flickering in BusinessView
Hi, I've noticed a flicker when moving the cursor up and down a icon in a business view. This is very annoying and sometimes prevent me from clicking a link. I've uploaded a video, so you can better understand what i mean. https://rapidshare.com/files/2275636169/Icon_Flicker_1.avi Is there a hotfix for this, because it makes our customer crazy and minimizes operability. Best regards Philip
How I can add a custom monitos with docsis specific OID
Hello every one I'm a old opmanager user in a 6.X verson, buen in the 8.x version I need to add a custom monitor to a Cable docsisi router. In fact my problem is when I try to create a miltinode SNMP monitor, beacause I Add a custom monitor and add in a Bulk monitor a specific OID in "tabular" mode but they doesn't graph anythig, and by mibbrowser app the resul is the same. However if I use a third party snmp wiever we can see the value with my oid. In past versions I was edit a xml opmanager
Move OpManager 8.2 to another server
Hello, How to move OpManager 8.2 (with MSSQL Backend) to a new server ? Best Regards
conversion from MYSQL to MSSQL
Hi I am moving OPManager from MYSQL to MSSQL but it seems to be taking a very long time. My MYSQL database was just under 6GB in size and it took about an hour to make backup of the database. I am now restoring it into MSSQL after following the instructions to change the database configuration. So far the restore has been going for 25hours and according to my MSSQL server so far 6.7GB of data has been restored. Are there any time lines on how long it should take to restore per GB and why does
HDD Totals and RAM totals not displayed
Hi guys, I seem to be having a issue on our reports with a few servers. I call the 2 objects in a sql script while drawing a report. OpManagerObject .RAMSIZE as RamTotalMB and OpManagerObject .HARDDISKSIZE as HardDiskTotalGB Most servers have this data but some dont. The usage report for ram utilization and disk utilization is correct. i also draw the free and use disk space on each machine and its also correct. Most servers are windows and are using WMI to collect the data. I have
Custom Event Logging
Hello, First. Please forgive me if my question is not appropriate to OpsManager.. Is there a module or any plan to add custom events that can be entered by Standard User for tracking non-device events but still directly affect hardware performance. For example, an update to a Search Engine index can cause cache rebuild which can affect CPU, memory and network performance in a client/server setup. What I envision is a feature that allow users (especially business users) the ability to enter custom
Next Page