java.exe extremely high CPU utilisation
We are running OpManager 8721 on a Virtual machine (ESX 4.0.0) 2 vCPU and 2 Gb RAM OS: Windows 2003 R2, 32 bit We are monitoring about 200 devices. I reinstalled VMWare tools (to exclude some options) and enabled the backup of the Virtual machine through VMWare. Since that moment the CPU consumption by java.exe has spiked to 100 %. I have added a second vCPU, the CPU load got down to 70 % - but still unacceptable. So: Before I reinstalled VMWare tools: CPU usage was 10% of 1 vCPU After: 70
Force10 S50v is detected as server with netsnmp
While trying to discover a Force10 s50v - it appears to classify it as a server with netsnmp - how does one rectify this so that all the appropriate monitors appear for the switch. Changing the tags manually does not populate monitors
Alert reminders for extended down time
Is there a way to configure OpManager to send reminders of a critical alert if a device is down for an extended period of time? We monitor routers and switches at remote locations that will occasionally lose power. We have notification profiles setup for when the device misses 1, 3 or 5 polls, but those all come in within the first 30 minutes or so. If we have a power outage that lasts several hours, it would be nice to get a reminder every two hours or so that the device is down. Is there anyway
Aggregate bandwidth monitor for switch interfaces
Hello, I'm using OpManager 9101 and have successfully created a custom monitor that displays the throughput of a switch interface using some notes from an old forum post. The monitor OID looks like the following: (.1.3.6.1.2.1.2.2.1.10+1.3.6.1.2.1.2.2.1.16)*8/($DELTA_TIME*1000*1000) This returns a rounded integer value in Mbps. The monitor is a little quirky (when I edit the monitor through a device snapshot, the polling interval and units I originally configured it with - 15 minutes and Mbps, respectively
How to start service OpManager in linux
hi i have problem i want to start service OpManager automaticly but if i close my terminal service opmanager is shutdown. i have refered http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002634503 but i have error env : /etc/init.d/opmanager no such file or directory please give me advice thanks didik p
unable to add device in Op6
Hello (again ), atm I try to add a device to OpManager6. Normaly no big thing, but here its somekind strange: 1) Searching for the IP adress of the device returns: "Sorry your search returned no results.Click here to add a device." 2) So I click "here" and am forwarded to "Admin > Add Device". I enter the IP-adress and the community string and click on "Add Device" 3) Now I get an error message "Device already present in the System" And now I am back to the 1st point. How do I get this device "into
Layer 2/Layer3 topology map for all branches
dear sir i would like to ask how can i make Layer 2/Layer3 topology map for all branch in one map? when i make the map and choose the seed device (core Switch) its only show me the local map and the network that connect directly to this device. i have different branches in same town and some branches in different city, how can i grouped all in one map? is it possible! thanks
Post your requirements for Network Management Tools
We are currently in the requirements gathering phase for the next release of OpUtils. For the next release, we have planned to include more tools in the Network Monitoring / Management area in addition to the enhancements to the existing tools. Your input would be greatly appreciated in the following areas: 1. Tools that you would require to get the details about your network devices. 2. Enhancements to the existing tools to meet your specific needs 3. Any other additional features like scheduling,
How to Add Windows Services for Monitoring
Hello-- We have some Domain Controllers that we want to monitor some of their Windows services. One example that we want to monitor is the DNS Server service--but there are several more services and we need to monitor for other servers as well. How do I add Windows services that are not on the list? A generic answer is fine so I can apply that info to other services. I'm guessing it might have to do with the server's MIB, but I'm not sure. Thank you!
Automate backup of database / configuration file.
Dear OPM Support Team, Auto backup of database / configuration file to the another server or other drive periodically. Thank you in advance. Ko Young Suk.
How Do I Apply the Same Monitors and Notification Profiles to Multiple Devices?
I'm stuck. I had a device (Windows 2003 server) have an alert fire for disk utilization, but the notification didn't get sent. I know it was working before, but for some reason it didn't send the notification email. I went in and tried to figure it out and decided it would be best if I just re-applied all of the notifications to all of our devices again--just in case. Now I'm stuck. I've got device templates -- I've got monitoring and alerts -- I've got notifications, but I can't figure out how
Problems OpManager "Process : Collector [ Failed ]"
their help with the following problem, Process: Collector [Failed], also indicates that the DB is corrupted, but the problem still perform RepairDB.sh and indicates the following message: [Root @ netflow opm-bin] #. / RepairDB.sh Checking if the server is running .... Useful Startup - Enabled == null strSSL Useful Startup - Protocol Name ===> http RepairDB in progress, it may take Some Time. Please wait ..... . / RepairDB.sh: line 16: myisamchk: command not found RepairDB completed. [Root @ netflow
Schedule a Discovery
Hello Is any way to schedule a Discovery? Maybe using an utility or running a program. Regards Orlando
OpManager Nokia Checkpoint Monitoring
Hello everyone First post on the forums so........ hello! I am trialing Opmanager 9 to see if we like the tool for SNMP monitoring of our firewalls. We want to use it for basic monitoring of octive connection count, cpu, disk space, memory etc. I have uploaded the checkpoint mib file onto OpManager and I am able to get stats back on CPU and disk space. However the stats being returned for memory and connection count are crazy. The returned value for connection count is 4.28E49672849. I get
Memory usage ESX hosts in CCTV
Hi, I want to create a widget of my 5 ESX hosts memory usage in my CCTV view. Cannot get this working :( please help me out please Cheers,
[Urgent] Process up / down False Alarm.
We are having the problem on monitoring server’s process. Installation information: OPM 9101, Win 2008 R2 64 bit, DB: MSSQL 2008. Situation: We are monitoring the Process of the server. But, OPM show it is down (and it goes up later itself). But, process was working all the time in the server. It was false alarm over and over. I changed the ping.properties’s timeout to 4. still no luck. Monitoring process shows down and up (false alarm) in OpManager. Is there any way to solve the process up/down
Monitoring of MS SQL Jobs
Hello. running OpManager build 9011. Is there any way to manage SQL jobs in OpManager or do I need to get AppManager, where it seems to be supported. thanks, Joe
Email notifications
Hi everyone, I have an issue setting up email notifications. The problem is it seems like I have to do same work twice: We monitor all our servers, workstations and devices using OpManager. The problem is I go through setting up each server on what specific services and monitors we need to keep an eye on. Then I have to do same thing when setting up a notification profile? It seems like same work done twice. (Would be nice to get an option like: everythin I am monitoring on this device I want
Alarms in OpManager
I'd like the ability to e-mail the alarm directly out of the alarm view of each device. So next to the "Acknowledge" and "Clear" buttons, I'd like an e-mail button that would take a scrape of the alarm so I can send it to specific technicians.
Unable to restore DB backup - opManager
I am trying to restore a backup from our opManager install to a new server. I have used the backup utility and the command line to backup our opManager database and then import to the new server. Both have failed. Server 1 (Old ) Windows 2003 x64 , opManager version 9011 Server 2 (New ) Windows 2008 R2 x64 , opManager version 9011 Error = Unable to restore data. Make sure the build number of your installation and the one in the backup is the same. I have verified that both installs are at
Threshold interval VS Monitoring interval
Hi, What is the difference between Threshold interval and Monitoring interval. If i set my device monitoring interval to 5 min, and my device threshold is set to 60 min. Does it mean that OpManager will check for threshold violation at every 60 min? or every 5 min? Thanks.
Missing device template: Cisco ONS 15454 SDH
Hi everyone, we have a bunch of these in our network, but the device template is missing. Is there a different template you think i can apply to it anyway? Best Regards
VMware Monitoring - ESXi - Disk free space utalization
Hi @ all, If anyone else has the problem that the disk free space of ESXi datastores will not be displayed with the correct amount of free space, pls consider to have a look on that host with vsphere and refresh that datastore. Than the correct amount of free disk space should be monitored. Means the host itself does not send up to date data to OpManager. So it seems not be a problem on OpManager's side. Just if anybody else has this problem ;-) Regards
OPM Device Notes - RO user with edit permissions
Hi, Is any possible to give edit permissions to Device Notes bookmark for RO user? regards, Kuba
default username and password wont work on new install of OM
I have just downloaded opmanager and installed on winXP as user with admin rights. i cant login using the default admin username and admin as password given in the instructions.. have these been changed? if not is there any other reason why i should not be able to login? i have used all the dafault installation instructions. thanks. chris
Default monitor not working with Centos
I can poll using snmpwalk & MIB Browser the OID .1.3.6.1.2.1.25.2.3.1.6, the same OID is used in our template for Linux monitoring and fails to collect data. If a new custom monitor is created using the same OID I can succesfully collect data. What am I missing, please help
Customize Widget feature
Dear OPM-Support Team, We want to customize Widget shown as below: Is it possible? Thank you in advance.
Widget - Disk usage in MB
Hi.. Is it possible to have a Widget showing Disk usage in MB insted of %? The % widget could be misguiding, since we have serveres with different sizes disks...some with huge disks at arround 1TB. So the widgets with the % calculations sometimes showes serveres with under 20% free diskspace, due to the fact that there might still be around 200GB free....
Adtran dials not working
I tought I did well since I was able to find documentation on how to modify CPU usage dial for my Adtran switch. However my OpManager 9 CPU usage grapsh shows a pathetic NO DATA AVAILABLE. Here is my device category definition : <?xml version="1.0" encoding="UTF-8"?> <CustomDevicePackage> <CustomDevicePackage deviceType="Adtran NetVanta Switch" iconName="switch.png" pingInterval="15"> <SysOIDs> <SysOID oid=".1.3.6.1.4.1.adtran.adProducts.1164"/> </SysOIDs> <GRAPHDETAILS> <Graph graphID="742" graphName="Adtran
Unable to get the device connected information from the switch, click here to go to the snapshot page.
Hello, I was wondering if I can have some assistance, If I goto maps->Layer2 Topology Map and select some devices I get the message 'Unable to get the device connected information from the switch, click here to go to the snapshot page.' On other devices I find I get all the switch connection details. I have checked the SNMP Credentials, MIBs and CLI cedentials and all are ok. I was wondering if someone can assist me in find out the reason why Thank you in advance
How good is Opmanager in Linux?
How good is Opmanager in Redhat ? Planning to move from windows to save License cost...
VMWare virtual server discovery
Hi, I cannot understand how the virtual server discovery works exactly. For example: If I add an ESX host how OPM discover the virtual servers inside it? Do I need to specify the Linux and Windows WMI credential first? What are the prerequisite to monitor the virtual servers? Do I need to install the VMWare tools? What if a virtual server is added later? What if a virtual server show "no ip address"? Thanks.
Deleting many interfaces of the same type
Good morning! I would like to know if there is any way to delete many interfaces of the same type, in the same way you are able to configure a notification profile to many nodes by using the quick configuration wizard. Thanks in advance, kind regards, Jorge.
What is Top N (10/25/50/100) reports?
Hi, What is the Top N (10/25/50/100) reports about? The number (10/25/50/100) is representing the number of devices to be included in the report? If yes, how the report pick which devices to be included? Thanks.
Can you monitor the network path?
Hi all, Can you monitor the network path? Ex) ￦￦192.168.10.5\temp Thank you in advance. Ko Young Suk
create custom device groups and subgroups?
Hello, I have a rather large network that I want to monitor using OpManager I would like to have some sort of dashboard where I can group my devices in a custom way. For example i want to have a group called "Building 1" inside which I want to have subgroups like "Wireless Access Points" "Switches" "Routers" "Printers" "Jboss servers" "Other custom devices group" and inside those I want to have the actual monitored devices. Is it possible to create such a setup? because the standard servers,
Browse tools under device snapshot
Goodday, Under Device Snapshot, there is a tool called "Browse to <device>". I click on it, it pop up a browser with http://<hostname>, but there is nothing display? Sort of like a page not found when we surf net. What exactly is this tools for? Do i need to configure something in order for it to works? Thanks.
Event Log rules data
Hi, Is Event Log rules = Windows's Event Viewer? Is the info polled from Window's event viewer? Thanks.
Supress Alarm handling
Hi, If i select Surpress Alarm for 1 hour. During the supress period: - If threshold violated or any services is down, alarm will NOT be generated? Thanks
Remote Access to Web Client
Hello, I'm currently evaluating OpManager and am getting frustrated since I can't seem to access the web client except from the local machine. It works fine and I have other websites hosted from this machine and they work however this one doesn't. It's hosted on a windows machine, any help would be great thanks!
Next Page