Can you add this features
hi 1-Why i cannot choose more than one category for ( Report,business view, notification... )? 2- why i cannot select multi device when creating maps to easy move more than one device? 3- why i cannot move the devices when creating maps with arrow key to easy put the device in accurate place? 4- When i put the cursor on the any devices when creating maps, there is no info about the device showing, it is just the name of the device, if i have more than one device with same name its confuse me? thanks
OPMananger and Data Domain 630
Is there a template for this Data Domain appliance floating around out there?
What is Rearm Value?
I have seen Rearn Value while setting thershold limit .What is that and use of it.
How to backup customized monitors in OPManager
Hi, After discovering an object (i.e: a VM running Win2K3) and applying VM template and Win2K3 template, and (this is where it gets really interesting/important, setting custom thresholds, alarms, adding monitors on specific services and processes, or even adding monitors to allow generating specific reports ... to save/export/dump this customized configuration set (on all monitored items)? To be able to restore all customized settings in case they are removed, changed by accident, or even worse
Next Release with dynamic ip address support
Hello, I would like to know if you plan to add the possibility of using a host name to a dynamic ip address, in future release. Because, as I tested and saw in others topics, OPManager resolve the host name and only store the ip address in his database. So it will not work with dynamic ip address. Thank You.
WAN RTT Monitor problem
I have two problems (questions): 1. How to add monitor using snmp v3 with write permissions? 2. Why every time when source router is restarted we must recreate all monitors ? (The attached message make me very nervous) Thanks, Milivoj
OP-manager backup on another device / partition
Hi, Is there a way to do the backup of OP-manager on another server or different partition of the same server? Thanks and Regards, Razvan Despa
rhels5 with opmanager install fails
Hi, Clean install of rhels5 with opmanager installation installed successfully without errors. However, when starting the /opt/ManageEngine/OpManager/bin/StartOpManagerServer.sh script, I get the following in my /var/log/messages log, prior to creating table PROTOCOLDETAILS: Oct 16 12:06:39 zadc2vu002p nmbd[4481]: name_to_nstring: workgroup name CROSSROADS.CO.ZA is too long. Truncating to CROSSROADS.CO.Z Oct 16 12:06:41 zadc2vu002p nmbd[4481]: [2012/10/16 12:06:41, 0] nmbd/nmbd_workgroupdb.c:name_to_unstring(56)
Support for VMware site recovery manager shadow machines or vim with the same name
Hi We have 2 different data center that are one the dr site for the other. Until now I've connected to OpManager only sex on the first datacenter because I don't know what will happen when I will put in the second. In the second dc there are replica vm for VMware SRM and I would like to know what OpManager will do with those vim. Those are switched off but have the same name of the live vm? Does OpManager recognize those SRM vim in some way?
direct messages dont work
Hi , do you know if after Sep 1st , something change on security policies of twitter , couse oppmanager cant send direct messages at my account. Thanks.
How to monitor individual information stores with Exchange plug-in?
We have five mailbox DB's on the server. I would like to monitor the size and availability of each mail store DB and logs. I need to see each mail DB separately and how much space each is using. I would like a breakdown of the user logons, read/writes and messages sent/received per mailbox DB. Also, I can't find any way to monitor the Exchange log files. I have Exch2010 (and OpMan 9.2 with Exchange plugin). Thanks
standby server error
hi i have big problem when i install standby server i get the error "error while configuring server" when i telnet the 13306 port of primary server from standby server i get the flowing error "N♦Host 'mon-standby.rasana.ir' is not allowed to connect to this MySQL server" what can i do ?
Downtime Scheduler
Hi, Is there a log showing if the Downtime Scheduler job has actually done what you asked it to do? We get alarms on servers that are in Downtime Scheduled jobs, and i need to check what happend, if servers are put in not monitored status, if the Downtime Scheduled job even starts etc. Regards, Svein
How do I monitor disk IO in linux?
Running Redhat Linux 5 on my test system. Disk IO on sda is described by this oid: .1.3.6.1.4.1.2021.13.15.1.1.4.17 (writes in bytes) .1.3.6.1.4.1.2021.13.15.1.1.3.17 (reads in bytes) When I get the value by hand (snmpwalk) it comes back as 234949468431 in bytes. / 1024 / 1024 turns it into MB, about 234949MB, or 235GB. So I tried ((.1.3.6.1.4.1.2021.13.15.1.1.4.17/1024)/1024) and got 0 back. Then I tested against .1.3.6.1.4.1.2021.13.15.1.1.4.17, and got 0 back, from OpManager. They I tried putting
Error in MIB
Hi folks, Trying to load the attached MIB file for our Netgear WG103 WAP's and getting the following error: Error parsing MIB:WG103_V2.2.2.mib Exception while loading MIB:Could not parse the file C:/Program Files (x86)/ManageEngine/OpManager/./mibs/WG103_V2.2.2.mib. The error occured at the line no: 875 ,column: 25. 1. The keyword 'ACCESS' or 'MAX-ACCESS'may be missing. or 2. The keyword 'SEQUENCE OF' may be missing. or 3. The syntax with invalid subType construct. Little bit unsure what the issue
How to keep quiet a event log alarm
We have varius alarms, that we want to became cleared definitely because not critical.
"At a glance" report
Is there any way to make such a report: Title -- "All is ok" (or "Some warnings, nothing critical", or "Critical! pay attention!") Body: Short summary for all the systems: ServerName1, status ("Ok","Warning"...), performance metrics (CPU usage, Memory usage, HDD usage, processes running 3 of 3),"Some EventLog warnings exists" ServerName2,.... Switch, status, Router, status My CEO wants to receive daily report on the health of my IT infrastructure, so in a simple form report can be ServerName1 --
problem in configuring the standby server
I am getting an error "primary server is not running on the host/port". server1 - primary server server2 - standby server port - 80 When I am configuring the standby server it is giving me an error 'primary server is not running on the given host/port'. I can telnet the port 80 of server1 from server2. please help
Is There a Way to Add Multiple Devices at a Time?
When we are notified of new devices on our network, sometimes if can be 30 at a time. We've been inputting them individually into OpManager and it occurred to me to ask if there is some way to add multiple devices at once? Thanks, sd
Buffer and cache showing zero's
We just turned on the MSSql module and all the data seems to be reporting fine but the fields: Buffer Cache Hit Ratio Cache Hit Ratio are both reporting 0 for their numbers and there are some zero's for other fields as well but most have data. Such as buffer: Buffer Cache Hit Ratio 0 % Page reads per sec 18 /Sec Lazy Writes per sec 0 /Sec Also here is Memory Excess Total committed memory needed 0 KB Granted WorkSpace Memory 0 KB SQL Cache Memory 32032 KB Now I have about 6 other SQL server
Least performing paths Widget?
Hi, On the RTTdashboard (IPSLA) there is a section for the least performing paths, but I don't see any widgets or widget ID. I would love to embed this on our intranet page. I pasted a pic of it from the RTTDashboard. Thanks! Rob
Not list the services - server 2008
hello I OpManager Enterprise central probe and version 9, installed on machines with Windows XP, I'm trying to monitor a server with Server 2008 R2 64bit via WMI, but the next problem is ocorendo, the CPU information, memory, disk being monitored certain, only that the MSSQL service and can not monitor. the services SNMP, WMI, RPC and DCOM are active I created a community for SNMP I am using a User with administrator permission gave permission for that in WMI User The strange thing is that some monitors
Monitor temperature in IBM bladecenter series H
Hi all: I'm testing the product and I have installed the free version (up to 10 computers) installed. It works quite well, but I have problems to monitor rare equipment. My problem is with the IBM BladeCenter H series, I can't get the OpManager same temperature. If other data, but not the temperature, I sorry but my english is very bad. I'm from Argentina. Thanks for all
Need Comparison of Disk Utilization & Partition Details Monitors
Hello-- I did a quick search online and within the OpManager user's manual and I can't seem to find a definition of an application of two monitors. As an example, on a Windows server/device, if I have the option of having a monitor set for Disk Utilization of drive C: and Partition Details of drive C: would I ever want to opt for both? Why? What's the difference? Thank you! sd
% Cpu utilization on period time
% CPU utilization in a period of time to generate an alarm generates alarm if the CPU is used by more than 15min Regards
Esxi Monitoring
Hi there, We were able to get our ESXi hosts discovered and monitored in OpManager, alongside with the guests that run on top of them using the root account. Now we would like to get rid of the root account into OpManager and instead use a read-only account. Can you please advise how we would accomplish this? (Monitor the ESXi servers without using the root account that we don’t want for security reasons. Thank you, Nick.
Schedule a file monitor
Hello How do I schedule a file monitor to run once a day at 8.30AM? Thanks
Telnet Monitoring
Hello Guys, Is there a way to monitor telnet connection? I have one telnet connection with some client, and i need to know if this connection is down. Is there a way to do this?
syslog for redhat
we have opmanager installed in windows i want to collect syslog for our redhat linux servers.but when i got to syslog view and filter by IP no syslog can be collected
Cisco WAE ACNS Content engine Custom Template
Hi All, just woundering if anyone has a template for one of these devices they would like to share, i have a 674 ACNS Server and i`m looking to get monitors setup for this in Opmanager. Thanks
SwitchPort Mapper No Longer Works for HP E4800G Switch
Since upgrading to the latest revision (8722) no longer able to map the ports on HP E4800G Switchs. The only information recorded is port status, port speed and vlan. Any help would be greatly appreciated.
OpManager NOT Re-Connecting To SQL DB
Hi team, OpManager Build No: 9011 Whenever my SQL DB restarts due to Windows Updates, My OpManager instance does not poll to re-connect to the DB. Is there any way we could change this? Thanks.
OPManager Utilization Issue - AIX Servers
Hi, I need a helping hand here. Anybody knows why our AIX Servers' utilization always disappears? By the way, we use CLI to monitor the AIX Servers. It is ok in the first time we do "test connection" but apparently, tomorrow it is disappeared. Is there a configuration need to adjust in our OPManager? Our OPMan version is 9. Hope to hear from you soon... Regards
Monitor Asp.net service
Hello Is it possible to monitor the "asp.net" service ? I want to monitor the input and the output packet's of the asp.net from IIS group and alerts me in critical situtation. as well as get reports about counts of them. Is it possible to configure this in OpManager and how? Could you please describe it for me in details. Regards
Service Pack 9.2 Released
Hello Everybody, We are glad to announce the release of Service pack 9.2 with the much awaited features and enhancements. Its a big list. So take your time to through them, make sure you plan your upgrade as soon as possible and get the most out of OpManager. New Features IPAM Plugin: IP Address Management plug-in helps you manage your IP Address. It also includes Switch Port Mapper to identify the switch port to which a device is connected. Discovery Rule Engine: Automate actions such as adding
local wmi
Hi! I'm trying to add a manual WMI counter on the OpManager server (it has other services). I get an invalid username/password. I searched this forum and found that I needed to remove the username/password for local wmi. I go the password page, remove the username and password, hit OK and then when I open it still has the username/password :) Any other way to remove it so it doesnt use credential for the local server? Will I still be able to monitor WMI counters? Thanks Nicolas
Multiple link Monitoring
I have several Cisco stacked switches. I am trying to create my maps with all the links but cannot create more than one link on a device. I want to monitor my primary and my failover which comes from one switch and goes to two different switches in a stacked configuration but has one IP address. I can see them in my ports but can only create on linked connection in my view.
Windows 2012 and NLB
Hi! first I wanted to know if there was any tempalte updates for Windows 2012. Has anyone tried to create a workflow or similar to monitor a website and if it not up than to send some kind of command to take that server out of the windows network load balancer? I cannot find a tool to do this. Nicolas
errors in loading MIBs
1. ENTITY-MIB-V1SMI.my ; 2. ENTITY-MIB.my ; 3. ISDN-MIB-V1SMI.my 4. ISDN-MIB.my 5. CISCO-RTTMON-MIB.my The first four MIBs are giving me a page on which written error! while the last one give me the page on which writter SNMP Trap Processor Info IMPORT failed: Could not find the file: C:/PROGRA~1/MANAGE~1/OPMANA~1/./mibs/Q-BRIDGE-MIB
hrProcessorLoad value of 0
hrProcessorLoad.100:0 hrProcessorLoad.101:0 hrProcessorLoad.102:0 hrProcessorLoad.103:0 When using the OID .1.3.6.1.2.1.25.3.3.1.2 This is a linux host running the linux agent Any advice or help is greatly appreciated.
Next Page