Can you install OpManager product on Windows Server 2012 machine?
Hi all, Can you install OpManager on Windows 2012 64bit Server machine? Thank you in advance.
OpManager WMI inconstancies
I recently switched out all my monitors for all of my VM's to make use of WMI for the Windows machines. Since then I have been picking up some strange data. Firstly - the poll interval on all the machines is set to 15 minutes (default) but yet I seem to get alerts at very random (sometimes less than 15 minute) intervals. Secondly - I get notifications of Windows machines being close to 100% CPU utilized, but when I actually look on the box I see numbers way less than 50%. Thirdly - when I check
New Vmware server discover
Hi We have already added all our 10 ESX hosts to OpManager successfully. If we then deploy new VM's are these imported automatically based on a time or do they need to be added manually , and if so how? Regarding physical servers, they can be added manually. Is there are update on a method to automatically add servers that have been added to ESX hosts, or based upon an daily scheduled IP range scan. This would ensure new servers arepicked up quickly without any user intervention. Is there
opmanager doesn't show traps for certain servers
hello, I'm facing the following issue. Traps are correctly sent to OpManager server, I can see them by using both Wireshark and the trap viewer embedded in OpManager, but they simply don't show up in the db and consequently in the OpManager interface. How can I proceed further? I guess there's some kind of issue in the Trap Processor but I don't know exactly how to troubleshoot this. Furthermore, I have to point out that this issue shows up only for certain servers, not all of them (we monitor about
Preventing thresholds from being overwritten
Hi I have a device template in which I have defined a threshold for the Free Disk Space in MB monitor. This threshold is appropriate for most drives, however for some drives it needs to be changed. From what I can tell I need to change it for each drive monitor individually which is not exactly ideal, but it works. Now lets say I add a new monitor to my device template and want to apply it to all devices using that template. I then apply the template to my devices and get the new monitor, but
Workflow does not work
I added the device (windows 2008R2 Server, both WMI and SNMP) I added the workflow for the server that if a process goes down, let workflow restart it. But it did not work. I tried the when there is a alarm 'process SNMP.exe down', check the status of snmp.exe process and restart. it did not work. (checking worked, but did not start the snmp.exe process) also, another workflow is When there is a alarm 'windows service SNMP service down', check the status of 'snmp service' and restart. (checking
SnmpTrap not capture by OpManager
Hi, We're doing a test with Telco customer. They have a custom build application which will send private enterprise Trap when any problem detected. Unfortunately OpManager didn't capture the Trap. OpManager is installed in Windows XP, output from Etherreal shows that the Trap sent and reach OpManager machine. Attached is the output from Etherreal. Thanks. Appreciate your help. Regards, Idaham
FTP Monitor
Dear good day. How to monitor ftp address? Example: ftp://200.208.24.72/ftpexibidoras Thank you.
Why does this Ironport MIB not work in OpManager?
I'm trying to monitor an Ironport security device in OpManager 7.1, and have downloaded the latest MIB but it will not open in OpManger of the stand-alone MIB browser, giving an error saying it could not parse the file with an error at line 7 column 40 I've spoken to Ironport support and they assure me that the problem myust lie with OpManager as they can open it fine in several other monitoring solutions. Can anyone help?
Problem in Integrating OpManager with DeviceExpert
Hi I have a problem in OpManager and DeviceExpert : Cannot Integrate OpManager with DeviceExpert and in gives me this error : Unable to fetch values from DeviceExpert, The server might not be running or the network traffic may be too high. The server is run and it seems everything works fine, I even set this configuration too : Open a command prompt and change directory to /opmanager/bin Execute the script ssl_deviceexpert.bat with the absolute path of OpManager installation folder. For instance,
Infrastructure Snapshot
Afternoon, I would like to remove some of the category's from the Infrastructure Snapshot Widget - is there any way to do this? Either that or is there a way to create a custom Widget with just the elements I need in? Thanks, Scott.
problem to detect WMI in Domain Controller
Dear Mr Gabriel , I have problem to to detect WMI in Domain Controler , aftrer makes WMI Cerdential , OpManager Must be Show the Category name Doman Controller , but it show Server , anyway I think OpManager not Detected it but by SNMP could be detect.. Are other Monitoring System for Example Solarwins or ..... Detect it or not ?? ? thanks a lot Regards. A.Gh
monitor the specific web services through OpManager
Hi, Is there any way to monitor the specific services of a webserver through OpManager? I mean that for example the web services of mail server tell me that the application is working properly A server which mail server has installed on it is up and it is working, we can ping it from another computer too, and the web server is up but the problem is that the application page is down. If i illustrate it more, the port is open and up but the web service page is down. the web part is down and user cannot
Checkpoint Mibs issue
Hi Team, I have uploaded the check point mibs in OpManager and getting a Error Error parsing CHECKPOINT-MIB Exception while loading MIB:Could not parse the file C:/Program Files/AdventNet/ME/OpManager/./mibs/CHECKPOINT-MIB. The error occured at the line no: 3489 ,column: 41. Please find the attached Mibs for your reference.
LINK BUSINESS
Dear good day. I'm trying to create links in the business view, but when I associate the same device to not allow others the same, saying that is already in use. This problem does not occur in 9011. Thank you. version 9200
Opmanager backupDB.bat problem
Hi, I'm using Opmanager 8 Build 8723. When I try to backup the mysql DB of the server from the file backupDB.bat I receive the error below. Could you help with the issue? Thank you ******************* Backup DB Started *********************** Backup Started on 11-12-2012 at 11:39:07:295 Trying to get DB connection ..... Successfully connected to DB. Please wait ! Reading tables from configuration ..... Tables to backup : ..... ..... ..... [Please wait ! Backup DB started ..... Error in executing
Run Program - Permissions?
I've browsed these forums last week looking for an answer to the issue I am having with Run Program / Notification Profiles, but I have not had luck applying the suggested answers from the other cases. I want to recycle an IIS application pool when a URL monitors threshold is triggered. The methods I have tried. (all scripts attached) 1.) Psexec: Batch files in /OpManager pseRecycleFSA.bat: C:WindowsSystem32psexec.exe %1 -c -f -h -d LocalFSARecycle.bat Arguments in notification
Opmanager stops working from time to time
Hello Is there anyone that have similar problems ? Opmanager stops graphing from time ti time and only restart helps to mage graphs again working. There is nothing in logs - and for now we need to use opennms that is monitor opmanager - is it still working. Thanks Pawel
IPv6 IPAM support?
Im wondering if there is IPv6 IPAM support available or if not is it under development?
Free OpManager requires license file
I try installing OpManager free version. But OpManager requires license file. What shoud I do? I use OpManager Japanease version with CentOS.
blank screen when i add process to be monitored
when i add new process to be monitored on the server the popup screen appear and its blank.
Domain controller category
Hi, In OPManager 9.2 (9200) Domain controllers are still are category on the same level as virtual devices. However our domain controllers are virtual devices themselves too.
OpManager with Firefox
Hi, For some reason the Business views don't get displayed with Firefox. OpManager version is 9200 and firefox version 16.0.2. I also have the latest flash plugin installed. On IE it works fine Regards,
Widget : missing device - Last N hours traffic
Hello, Few of my devices (firewalls, servers, ...) are missing in the drop-down list when I want to add a widget "Last N hours traffic" in a CCTV dashboard. I have 2 fortigate firewalls configured the same way (fortigate, snmp v1). In SNAPSHOT page : both show interfaces, RX/TX, ... values (interface tab). But only 1 appear in the drop down list of CCTV Dashboard WIDGETS. 1 firewall device appears in widget but not the other: The missing one in Wigdets is this one : I already have restarted OPManager
OpManager ticket open - NOBODY is taking care of it
Hi, I have the ticket 4408820 open and it's about one month I am asking updates, but nobody is taking care of it. Let's see if opening a problem in the Forum area helps. Thanks
Problem(s) in setting criteria for a notification profile
Hi, We're using opmanager v9200. If I open up the editor 'Edit Criteria for Profile ...' and want to select an option like "When any ... URL is down" the application says: No URL monitors have been added for this device. If I try to the option "When any ... Windows Service is down" I get an unusable list of windows services that aren't being monitored on the device. I won't get the same error message like above: No URL monitors.... Some of the Windows services listed are even non-existent in our
Opmanager Device Licenses
Hi, I am monitoring a vmware host and it has a guest server that is also a domain controller. If I set the guest to be a domain controler does that use one or 2 device licenses? Thanks Steve
OpManager - Many False Positive Alerts and Delayed Positive Alerts
We have been demoing out OpManager 9 for the last couple weeks and the setup looks ok. However, I frequently receive SMS messages (sometimes 30 at a time) that state: Attention - Host name Message: Device not responding: Probably down or busy Device - Host name Category - server/router/etc. Error Condition: Attention If I check the status of these hosts, even immediately after receiving these alerts, I can ping, SMB, RDP or SSH these devices just fine. On the opposite end, we did have an outage
Stuck in maintenance mode
I set a downtime schedule a couple days ago for some maintenance we had to do on a group of servers in the Downtime Scheduler. After the maintenance window closed, I deleted the schedule so no one would enable it later. I discovered later that the servers that were listed in the schedule are still showing "On maintenance" and the Service and Windows Service Monitors are listed as down. I removed and re-added the monitors and did a rediscover/update status, but it still shows as "on maintenance".
Automated method to disable interface monitoring
We are looking for a way to dynamically assess whether an interface up/down alert (or any interface alert, for that matter) is worth sending to the NOC. For example, if a link to a server gets saturated or goes down, we don't really care, but we do care if an uplink or other critical link is saturated or goes down. We would like an automated way to turn on/off interface monitoring using a script or tool without having to search for the device, find the interface, click configure, and disable the
The file that you have specified is not compatible with this product
This is what I get when I'm trying to install the hotfix to move to build 9010.
OPMANAGER - Configuring Mail Server
Hi friends, I´m facing a problem with this configuration where I´m trying to configure a gmail account and I receive the following error: 530 5.7.0 Must issue a STARTTLS command first. u27sm677683yba.21 I´ve tried many ways to do this but was not positive. Can you help me with this? Thanks for your attention!
Problem getting data from 3Com 4200G switches
Discovery worked and I get some data from the switch (interfaces list and I typically get some packet loss and response time data), but I don't get any CPU, Memory or Bandwidth data. I added a monitor after searching for the proper OID for CPU ratio, but the widgets don't report at all.
OM keeps failing with Process : OpManagerProcess [ FAILED ]
Hello, support. I am evaluating the OM running on a Linux server. I use a dedicated mysql server. After the installation, everytime I started OM it gets this error. I deleted all the OM tables, then started up again. the error just won't go away. I can't scan my networks for snmp-enabled devices. It just did not discover any device. If I tried adding a device manually, it said it's not reachable even though the device is pingable from the OM server. I turned off the host FW on the OM as well. I had
How to login to Opmanager MySQL DB from a remote machine?
How to login to Opmanager MySQL DB from a remote machine? i am getting an error as below while trying to connect. ERROR 1045 (28000): Access denied for user 'root'@'ABMLCHEOPMGVS01' (using password: NO)
"Alert if Threshold is violated XXX time(s) consecutive
Hi, I think that this parameter doesn't work after applying 7024. The first time the value reaches the threshold, it sends the alert notification, even the number of times is >1. Thanks. Miquel
Dashboard Question
I have a question about the dashboards. Most of my devices are in the Virtualization section. I notice that when creating a dashboard with a widget such as Last Polled Value of CPU Utilization that it doesn't include ANY devices from the Virtualization category and only from the Server category. What I am trying to accomplish is aggregate several machines from different categories for a single metric such as CPU Utilization onto one dashboard. I can't find any way to do this, does anyone else know
OPManager: SQL Server 2008 R2 cluster support
Hi, i was wondering if SQL Server 2008 R2 cluster is supported. Thank you
OM lost network connectivity error
Hello, I see this error about once a week, and I have to restart the OM services in order to get everything functioning again: OpManager has detected that it has lost network connectivity and has suspended all monitoring. Monitoring will be automatically resumed once connectivity is established. Any ideas on why this keeps happening? -- Cody
OpManager don't sends mails
Hi all, i moved the complete OpManager manually from a damaged server to a new one. Everything seems to be ok, but OpManager don't send mail anymore. Mailserver settings are ok and from this server i can send mail by using Outlook. Can anybode help? Thanks Jens
Next Page