CPU utilisation
hi i am getting this error pls help me out on this CPU Utilization is 100%, threshold value for this monitor is 95%: Top 3 Processes:-RtRootSvc - 12.5%;wmiprvse - 0.32%;svchost - 0.16% Critical
How to monitor HP ProLiant Server - RAID / Power / etc
Hi, Can someone guide me how to monitor the HP ProLiant Server? Basically i want to monitor the RAID, Power Supply, System Health and etc. I have downloaded MIB from http://h18000.www1.hp.com/products/servers/management/hpsim/mibkit.html Im not sure whether this is correct file or not, please guide me next step from this. -- Regards, Anandharaj System Engineer (Unix / Linux)
Negative CPU Utilization
Why do i see negative CPU utilization? What seems to be the cause of this? Is there problem with my OPManger 7 build 7025. Thanks..
Is there any way to implement Single Sign on on Opmanager?
I've migrated to 9400 build and the AD domain feature works fine, but it would be great to get the credentials from the browser like ServiceDesk does. Thanks! Best regards.
How to remove MSSQL dashboard [9401]
Hi How do you remove the MSSQL dashboard from a server after you have unchecked all of the MSSQL monitors?
IPv6 support
Does OpManager build 9400 support IPv6? Regards, Ramzi
Manage Engine Dashboards
Hi All, Any third part tool available for the presentation of Opmanager dashboards Regards Adnan
SNMP not working for SUN Solaris
Hi, I have added the server, configured the CLI access credential. I can ping the server from OpManager. But I tried SNMP credential and it is not working. Can i get some advise on how to troubleshoot this? I am using "public" community name. How do i crosscheck whether the SNMP is running in the server, or the community name is enable? Or is there any other config i miss out in OpManager? Running SUN Solaris (HP Server). Thanks.
Problem to signal alarm for syslog messages
Hello, I tried to give me alarms when receiving syslog messages but without success. If I go under "Alarms" -> "Syslog Alarms" I still have nothing! Under "Syslog Rules" I have only one rule and is configured in order to accept all messages. The rule is set as: Facility Name: Any Severity: all checkbox checked Match Text: Alert Severity: Attention Alarm Message: $Message Number of Occurrences: 1 Time Inerval: 60 So, with this configuration I was sure to accept all syslog messages but nothing. But
"Discover Devices" Not working in OPMANAGER9
HI, I am using OPManager9 and once i need to add multiple devices i tried to add them using " Discover Devices " but its continue to loading till infinite time when IMPORTING DEVICES in discover devices option. Kindly advise in this regards.
Exception while loading MIB:Could not parse the file
F5 MIB's are not loading on OPManage build 9101. Attached is the error message and the MIB in question (provided directly by the F5 gear in question). Error parsing MIB:F5-BIGIP-COMMON-MIB.txt Exception while loading MIB:Could not parse the file C:/PROGRA~2/MANAGE~2/OPMANA~1/./mibs/F5-BIGIP-COMMON-MIB.txt. The error occured at the line no: 17 ,column: 56.
New device(s) added to the Port [xx:xx:xx:xx:xx:xx]
Hi, All the switches we monitor with OpManager all show the same alarm which was generated around the same time: Attention 2012-12-12 11:11:18 New device(s) added to the Port {00:1B:78:57:0E:28] There are multiple alarms on each switch showing different MAC addresses for each instance of the alarm. I can't see why these alarms have been generated or how to suppress them. There's nothing on the switch logs to suggest anything happened, and there are no snmp or syslog rules configured within OpManager
Backup doesnt seem to be working since 9400
Hello Before I upgraded to version 9400 I used to be able to backup OpManager in about an hour. Now I cant seem to get OpManager backed up in a reasonable time in the Data Maintenance. Today I have let the backup go for 7 hours and it still says "backup in progress" I havent been able to let it go longer because we cant go after hours without OpManager monitoring our data center. I upgraded to 9410 to see if it fixes the issue. But it still just says "backup in progress"
Hyperlinks in Opmanager e-mail notification messages
Good day We are use licenced OpManager 9.2. In e-mail notification message hyperlinks for fields "Message" and "Device Name" look like "http://localhost.localdomain:80/fault/AlarmActions.do?methodCall=alarmProperties&entity=...etc" and "http://localhost.localdomain:80/devices/objectdetails.do?requestid=SNAPSHOT&name=...etc" Can we change these hyperlinks to "http://192.168.1.***:80/fault/AlarmActions.do?methodCall=alarmProperties&entity=...etc" and "http://192.168.1.***:80/devices/objectdetails.do?requestid=SNAPSHOT&name=...etc"?
How to connect to SDP with PFX certificate
Anyone hows how to do this? Connect OPManager to SDP with PFX certificade.
Alert when there is no SNMP trap
We have an environment monitoring device that we have added into OpManager. (IMS4000 by Sensaphone) We run a generator test each week and when it runs it generates an SNMP trap. I want to be notified when the generator did not run. Can I set up a workflow to notify me when an SNMP trap is not generated? I can set up an email to notify me when a trap occurs, but the issue is that when the generator does not run it doesnt send a trap. Therefore I need to specify that there should be a trap during
ManageEngine products and LDAP
I've a question about managing and integrating different ME products via a LDAP system. lets say if we purchase OpManager, ServiceDesk, OpStore, Application Manager, could we possibly integrate them with a LDAP system (specially for security options), so that the authentication of those products will be handled by single point of a directory access system (like OpenLDAP). I see ServiceDesk has already some options for using and integrating with external directory system, but how about OpManager and
OpManager snmp polling , default port
Dears, I've configured the OpManager to monitor some devices (2 desktops + 1 printer). OpManager just working fine, and performance data such as cpu usage, memory usage, etc are gathering fine. I just need to know which port(tcp/udp) is used by OpManager for polling data from devices. because currently i see only udp port 162 is occupied by OpManager which i think it is related to snmp trap and not polling .. Is it kinda random port or is it same as web-port ?
Disk Utilization problem!!!!
Dear Mr. Gabriel , Would you please give me some information about how to calculate the Disk Utilization in OpManager ? I think after Calculating the Disk Utilization , opManager further more Physical Memory is calculated. so any description on this subject will be apreciated . Regards.
Windows Service alarm dont clear by themselves.
Hi, I have an issue where a windows service alarm would come on (the purple ones), but either it is a false alarm or it clears back up, but in OPManager it will still show the alarm. Even when you go on the specific device in OPmanager you see the alarm ie. "Windows NT Service Automatic Updates is Down" but the service is started. The alarms don't clear out by themselves when the issue is fixed, or when OPmanager notices that the issue is no longer there. Regards, Michael. See attached.
copying to tmp table
Hi, My opmanager installation is very slow, when I look in the mysql processlist I see the following entry all the time, this query is running almost continuously and taking +20 sec. to complete. 'Copy to tmp table' seems to me to be a very timeconsuming action. Anyone know why it's doing this all the time and is this harmfull for the performance ? | 6 | root | localhost:28812 | opmanagerdb | Query | 18 | Copying to tmp table | select * from ( ( select ManagedObject.DISPLAYNAME,ManagedObject.NAME,
OpManager support eng roles and responsibilites
Hi We hire one eng on a support level just to monitor Alerts. Please i need list of task can be assign to him. Thanks Best Regards M.S
Daily Report Newly Discovered Devices
Hello, I am sure I am over looking this report or an option to create a custom report for discovering all new devices added into Opmanager from the previous day. We would like a report generated that will show all new discovered devices (network devices, VM Snapshots, physical machines). I am not able to find this report nor can I seem to find the right set of reports to use for this. We have other team members adding devices or vm auto discoveries and not all device notes are being added by other
OpManager shows some interfaces on Cisco ASA 5520 as "DOWN" when they are "UP"
Hello, I am monitoring a Cisco ASA 5520 using OpManager. For some reason two subinterfaces on the ASA shows as "Down". One shows as "shutdown" (administratively down) and the other one as "down". However, when I check the ASA, both interfaces show as "interface is up, line protocol is up". Could you please help me figure out why it shows down in OpManager? (Other interfaces on the same ASA shows right status). Thank you.
No traps are defined in F5-BIGIP-LOCAL-MIB.txt
In attempting to load traps from the 2 mib files related to the BIGIP gear we have, I'm finding that OPManage cannot parse the file and find the actual trap definitions. I have included the 2 MIB's that we cannot get to parse, please review, feedback is appreciated. We get the same error upon trying to load traps from either of the following 2 MIB files. No traps are defined in F5-BIGIP-LOCAL-MIB.txt No traps are defined in F5-BIGIP-GLOBAL-MIB.txt
Bug on "Add Monitors" Page in OP Manager
Hi, On the "add monitors" page, if i select the category name like "Memory Monitors", it did not select all the child items. instead it left one of the item from the selected category and select one child item from the previous category. please refer to the attached picture where 'pages per second' is left out and 'used logspace' is selected. same behaviour is when i deselect the 'Memory Monitors''
AD login unstable
Hi, I just upgrade to OpManager build 9400 and add our AD server in it for login. However, I discover we always failed to login with AD account specially when I press "Enter" after enter user id , password and select to login with our AD. Most likely 10 times will failed with 7 times etc. If I select login to AD with mouse select and click login with mouse instead with "enter", fewer problem occurs like 10 times will failed with 1-2 times. I think may be this is cause by the login page script when
invalid license when installing Opmanager on a new machine
I m trying to migrate my Opmanager to a new machine as the old one is going to retire soon. when I try to install version 9101, i keep getting the invalid license error message. my current version on the old machine is 9101. how do I export the license to the new machine ?
Filtering Server Interfaces
Is there a way to automatically filter out interfaces that don't have a macaddress associated with them? It's really tedious when adding a server because you have to go each device to remove the unwanted interfaces and if you happen to do a rediscover, they come back! Can i edit a configuration file or something to do this?
script monitor and custom alert message
Hello support, I created a powershell script monitor. It's working fine. But I would like to have a custom alert message. I enabled all thresholds (attention/trouble/critical/rearm). My script has got the following strings: Write-Host "Message: Licenses in use: $list" But I don't see my message in the OpManager's alarm. How to use custom 'Message' for that ? Can you please provide any examples ? Help is not clear on that: Output Format: Message:This message will be used as alarm message.
SMS server settings
Hi, In Opmanager once you configure (incorrect) settings for SMS server settings it is impossible to clean up the settings. The GUI now requires valid input (which is not available) and won't allow me to delete whatever is in it now. Additionally now opmanager posts messages "Modem is not connected". How can I get rid of this?
How to remove ads on Opmanager login screen?
How can I remove the slideshow type ads on the main login screen for Opmanager?
Moving OpManager 8 instance to Windows 2008 R2 and SQL 2008 R2, No widgets available!
Hi there. I'm running the latest version of OpManager 8. I'm attempting to perform a clean install on a Windows 2008 R2 server using SQL 2008 R2 Express as the DB and when I log in, no maps or widgets are visible. I also see the following error in the log files: 08:32:24:960 AM com.adventnet.db.persistence.metadata.MetaDataException: Illegal value specified for a BIGINT column: #(select TYPEID from WidgetType where TYPENAME in ('@(widget.typename.general)','General (Map View and Others)')) 08:32:24:960
Cleartext password in cookies
Hello, I couldn't help but notice that when I log into OpManager with the "Keep me signed in" box checked, my username and password are saved in plaintext in cookies. Is there a better way something like this might be accomplished? This seems like it could be a pretty big security issue, especially since the cookies aren't even set as Secure. My knowledge of web security is pretty limited, but I don't feel very comfortable knowing my password is floating around freely, especially if it's a password
Installing Opmanager 9.4 on Ubuntu 12
Hi Trying to install as above , installation seems to complete but it never starts , any pointers as to what I might be doing wrong ? Scott
Bonded Linux interfaces (HP servers)
I have an interesting issue with "teamed" interfaces on HP DL380 servers running Linux. When I manage the server from OpManager, the teamed interfaces are detected as 10Mbps. This is a Gbps interface and it is plugged into a Gbps port on the switch. I have an exact duplicate server (hardware the same) running Windows 2003 Server and the teamed interfaces are detected properly at 1Gbps. I have multiple Windows servers and will be migrating all of them servers to and need to figure out how to have
how can i create unattended report for future analysis?
Hello, i need to create a report while i'm not at my client for the utilization and others to review and analyze later. i wondering if anyone instruct me how to create it. thanks Makar
Select View On Infrastructure View
"Select View" is missing from the infrastructure views I created. One of the old infrastructure views has it. How do I enable it on the view?
Scheduled report does not shoot a mail
Scheduled report does not shoot a mail even after selecting it and clicking on enable.
Configuring USB WAVECOM SMS Modem PL2303
Hello, I got the SMS modem Wavecom USB SMS Modem and I would like to configure it with OpManager. The Windows7 detected the Modem as Prolific USB-to-Serial Comm Port (COM2). I have change the setting as per the the Supported Modems for SMS WebPage; No. Modem Version Baud Rate Manufacturer 1 Itegno 3000 115200 Wavecom 2 Itegno WM1080A 115200 Wavecom 3 Wavecom M1306B Wavecom 4 MultiTech MultiModem MTCBA-G-F1 5 Wavecom Fastrack M1206B 115200 Wavecom But all I can see that in OpManager Modem is not connected
Next Page