SNMP walk - check if the router is responding to NFA's SNMP Request.
How to check if the router is responding to NetFlow Analyzer SNMP Request
For Version 12 and above:
In a CMD prompt, navigate to the NetFlow installation directory (OpManager\troubleshooting\). Execute SNMPWalk.bat for windows or SNMPWalk.sh for Linux as follows and send us the output:
SNMPWalk.bat Router IP 161 SNMP community
Example :-
SNMPWalk.bat 10.1.1.1 161 public
New to ADSelfService Plus?
Related Articles
Steps if a device can only repond to SNMP v2 request
To force NFA to use SNMP v2 only. 1. Navigate to <NetFlow\conf> and open the system_properties.conf and add the following property in the very end. SNMPTargetV2C=true 2. Start the NetFlow Analyzer service and check the issue.NCM/NFA 12100 Consolidated Fix
Note: This is applicable only for NCM/NFA/FWA Build 12100. Make sure to take the backup of the installation before applying the patch. Patch: 1. Stop NCM(OpManager) Service. 2. Download the patch file from the link here 3. Copy and extract (using ...USM stats table error when updating SNMP v3 credentials
Please follow the steps given below to fix the USM engine table error when updating SNMP v3 - 1. Login to NetFlow Analyzer UI. 2. Open a browser tab,type the following URL. ::http://<hostname>:<port number>/netflow/jspui/runQuery.jsp (ex: ...SNMP Test using Free Mib Browser tool for Windows
Please find the steps to Test SNMP if the SNMP update not working : RDP to the server where the Application is installed and follow the steps: 1. Open command prompt as Administrator ( Right Click on CMD -> Run As Administrator ). 2. Navigate to ...Steps to Update SNMP in NetFlow Analyzer version 12 and above
NetFlow Analyzer get the Device Name, Interface Name and Interface speed with SNMP configured on the device. We uses Read-only SNMP community configured in the device. You have to do SNMP update for devices in NetFlow Analyzer UI to get the correct ...