NetFlow Analyzer Disk Space Requirement
Aggregated Data:
1. Historic Data (Forever)
Connversation Data = (507000 byte * number of top record * number of interface * 2 )
Src and Dst data = 2* 58200 byte * number of interface
Application Data = 2* number of application *number of interface * 100940 byte
Historic Data = Connversation Data + Src and Dst data + Application Data
2. Top Stats Data
TopStatApplication = (507000 byte * number of top record * number of Routers )
TopStatQos = (507000 byte * number of top record * number of Routers )
TopStatConversation = (507000 byte * number of top record * number of Routers )
TopStatsData = TopStatApplication+ TopStatQos + TopStatConversation
3. One min file size :
One Min File Size = 60 bytes * 60 Min * 24 hours .
= 86400 Bytes for a interface / day.
= 86 KiloBytes for a interface / day.
Aggregated Data Space = Historic Data + Top Stats Data + One Min File
----------------------------------------------------------------------------
Raw Data:
Each flow is around 500 bytes(roughly).
So, HDD space required (in Bytes) = 500 Bytes * time in seconds * Flows Per Second.
For 10’000 flows per second, with a setting of 1 hours raw, how much db size will it take?
Here, (500 Bytes * 3600 seconds * 10000 Flows Per Second) calculates the space required by the flows received for 1 Hour.
------------------------------------------------------------
Disk Space Needed = Historic Data + Top Stats Data + One Min File + Raw Data + 100 GB ( Installation/Report/default data ) |
New to ADSelfService Plus?
Related Articles
NetFlow Analyzer Tool Disk Space Requirement
This this the Approximate Disk Space Calculation for Storing RAW Data , Aggregated Data and 1 min Flat files in NetFlow Analyzer: Aggregated Data: 1. Historic Data (Forever) Connversation Data = (507000 byte * number of top record * number of ...
Steps to Reduce the DISC SPACE for NetFlow Analyzer ( rawCleanup )
Please follow the below steps to reduce the Disc space storage in NetFlow Analyzer: 1. Stop NetFlow Analyzer service. 2. Open command prompt as administrator and navigate to NetFlow_Home/troubleshooting 3. Execute rawCleanup.bat and wait until the ...
Network Packet Sensor | NetFlow Analyzer
Incorrect traffic information in Netflow analyzer
NetFlow Analyzer shows the information based on the flow Packets (NetFlow, sflow, Jflow, netstream etc..) exported by the device to the NetFlow Analyzer installed server. We have seen many customers come with the issue that the Utilization ...
UDP port block Message In NetFlow Analyzer
In NetFlow Analyzer we do two types of check in windows firewall, while flows are being received in server 1) Check if there is any allow rules created to allow UDP port say "9996" -Once our product find out this rule then flows collection will get ...