Hello Community,

 

I'm evaluating Manage Engine Netflow Analyzer. However, I'm not able to see the routers interface.

 

I have configured the router with the following Netflow Configurations:

 

show flow monitor
Flow Monitor FlowMonitor1:
  Description:       User defined
  Flow Record:       FlowRecord1TopT
  Flow Exporter:     NETFLOW-TO-ME
  Cache:
    Type:              normal
    Status:            allocated
    Size:              32768 entries / 2097276 bytes
    Inactive Timeout:  15 secs
    Active Timeout:    86520 secs
    Update Timeout:    1800 secs

 

 

show flow record
flow record FlowRecord1TopT:
  Description:        User defined
  No. of users:       1
  Total field space:  35 bytes
  Fields:
    match ipv4 tos
    match ipv4 protocol
    match ipv4 source address
    match ipv4 destination address
    match transport source-port
    match transport destination-port
    match interface input
    match interface output
    match flow direction
    collect counter bytes
    collect counter packets
    collect timestamp sys-uptime first

 

uk0149_ISR1921_100Cheapside#show flow exporter
Flow Exporter NETFLOW-TO-ME:
  Description:              User defined
  Export protocol:          NetFlow Version 9
  Transport Configuration:
    Destination IP address: 10.45.1.61
    Source IP address:      172.17.142.120
    Transport Protocol:     UDP
    Destination Port:       9995
    Source Port:            55775
    DSCP:                   0x0
    TTL:                    255
    Output Features:        Not Used

 

 

show run int tunn 0
Building configuration...

Current configuration : 822 bytes
!
interface Tunnel0
 description ** mGRE/NHRP tunnel **
 bandwidth 2048
 ip address 172.17.142.120 255.255.255.0
 no ip redirects
 ip mtu 1400
 ip flow monitor FlowMonitor1 input
 ip flow monitor FlowMonitor1 output

 

 

Can you tell me why I can't see the device?

 

Cheers

 

Carlton