PIX 501 not showing any results in FWA
Hi,
I am trying FWA for a client and have set up a lab with a PIX501.
The problem is that there seems to be no stats at all for the device. It is showing up as a known device, but there are no stats. I am looking in particular at the logins, failed logins, command executed, security stats. I have a Cisco 837 routers which is showing some stats, but not the PIX. If I look at the packet count on the FWA UI is showing packets received. I am also sending to another syslog server to see the traps.
There seems to be a lot of functions that do not work with a PIX, like through put etc. Are you able to tell me what stats I would expect to see for such a device.
Thanks
Scotty
Below is my PIX config:
pixfirewall(config)# s run
: Saved
:
PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
clock timezone NZST 12
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras xx
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_in deny ip any any log
pager lines 24
logging on
logging timestamp
logging console informational
logging trap informational
logging device-id hostname
logging host inside xx
logging host inside xx
mtu outside 1500
mtu inside 1500
ip address outside xx
ip address inside xx
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
access-group outside_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet xx inside
telnet timeout 5
ssh timeout 5
console timeout 0
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
terminal width 80
Cryptochecksum:e9d4067a818dec076d710f176febf141
: end
pixfirewall(config)#
I am trying FWA for a client and have set up a lab with a PIX501.
The problem is that there seems to be no stats at all for the device. It is showing up as a known device, but there are no stats. I am looking in particular at the logins, failed logins, command executed, security stats. I have a Cisco 837 routers which is showing some stats, but not the PIX. If I look at the packet count on the FWA UI is showing packets received. I am also sending to another syslog server to see the traps.
There seems to be a lot of functions that do not work with a PIX, like through put etc. Are you able to tell me what stats I would expect to see for such a device.
Thanks
Scotty
Below is my PIX config:
pixfirewall(config)# s run
: Saved
:
PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
clock timezone NZST 12
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras xx
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_in deny ip any any log
pager lines 24
logging on
logging timestamp
logging console informational
logging trap informational
logging device-id hostname
logging host inside xx
logging host inside xx
mtu outside 1500
mtu inside 1500
ip address outside xx
ip address inside xx
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
access-group outside_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet xx inside
telnet timeout 5
ssh timeout 5
console timeout 0
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
terminal width 80
Cryptochecksum:e9d4067a818dec076d710f176febf141
: end
pixfirewall(config)#