We have Cisco 4507 RE with 8-E Sup Engine, we were trying to monitor the traffic of one of its interface, but only the inbound traffic is getting monitored, below is the config enabled on the switch for monitoring netflow. please assist us to monitor outbound traffic.
interface GigabitEthernetX/X/X
ip flow monitor NETFLOW_M input
flow record NETFLOW_R
match ipv4 tos
match ipv4 dscp
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
match interface input
collect interface output
collect counter bytes long
collect counter packets long
collect timestamp sys-uptime first
collect timestamp sys-uptime last
flow monitor NETFLOW_M
exporter NETFLOW
cache timeout inactive 5
cache timeout active 60
record NETFLOW_R
flow record RECORD1
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
collect counter bytes long
flow exporter EXPORT1
destination a.b.c.d
transport udp 9996