Not able to receive traps
Hey guys!
I have recently downloaded Adventnet OpUtils Utility Release Version 3.1.3 Build 3130 and I have been experiencing the following problem:
I've got several Access Points sending SNMP traps to the server where OpUtils is running. I would like the AP's to send the traps using a community different to public.
The server is receiving the traps, my tcpdump shows:
16:18:43.890771 arp reply 10.0.2.2 is-at 00:0d:9d:cd:22:33
16:18:44.891781 IP 10.0.2.42.ntp > hora.rediris.es.ntp: NTPv3, Client, length 4816:18:48.465113 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(37) E:cisco.1.507 10.0.2.42 linkDown 820387 .iso.org.dod.internet=[|snmp]
16:18:48.715121 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(36) E:cisco.9.41.2 10.0.2.42 enterpriseSpecific s=1 820587 .iso.org=[|snmp]
16:18:48.965760 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(38) E:cisco.1.507 10.0.2.42 linkDown 820587 .iso.org.dod.internet.mgmt=[|snmp]
16:18:49.215777 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(37) E:cisco.1.507 10.0.2.42 linkUp 820588 .iso.org.dod.internet=[|snmp]
16:18:49.466456 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(36) E:cisco.9.41.2 10.0.2.42 enterpriseSpecific s=1 821034 .iso.org=[|snmp]
16:18:49.716441 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(38) E:cisco.1.507 10.0.2.42 linkUp 821034 .iso.org.dod.internet.mgmt=[|snmp]
16:18:49.967120 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(36) E:cisco.9.41.2 10.0.2.42 enterpriseSpecific s=1 822790 .iso.org=[|snmp]
16:18:50.217115 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(38) E:cisco.1.507 10.0.2.42 linkUp 822790 .iso.org.dod.internet.mgmt=[|snmp]
but the "trap receiver" tool does'nt display them.
It works if I set the APs to send the traps with the community public.
My snmpd.conf file is as follows:
com2sec notConfigUser default public
group notConfigGroup v1 notConfigUser
group notConfigGroup v2c notConfigUser
view allview included .1.3.6
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1
access notConfigGroup "" any noauth exact allview none none
syslocation Casa (edit /etc/snmp/snmpd.conf)
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat
Are there any shown issues when using communities other than public?
Thanks in advance and best regards,
Borja Borrego
I have recently downloaded Adventnet OpUtils Utility Release Version 3.1.3 Build 3130 and I have been experiencing the following problem:
I've got several Access Points sending SNMP traps to the server where OpUtils is running. I would like the AP's to send the traps using a community different to public.
The server is receiving the traps, my tcpdump shows:
16:18:43.890771 arp reply 10.0.2.2 is-at 00:0d:9d:cd:22:33
16:18:44.891781 IP 10.0.2.42.ntp > hora.rediris.es.ntp: NTPv3, Client, length 4816:18:48.465113 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(37) E:cisco.1.507 10.0.2.42 linkDown 820387 .iso.org.dod.internet=[|snmp]
16:18:48.715121 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(36) E:cisco.9.41.2 10.0.2.42 enterpriseSpecific s=1 820587 .iso.org=[|snmp]
16:18:48.965760 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(38) E:cisco.1.507 10.0.2.42 linkDown 820587 .iso.org.dod.internet.mgmt=[|snmp]
16:18:49.215777 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(37) E:cisco.1.507 10.0.2.42 linkUp 820588 .iso.org.dod.internet=[|snmp]
16:18:49.466456 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(36) E:cisco.9.41.2 10.0.2.42 enterpriseSpecific s=1 821034 .iso.org=[|snmp]
16:18:49.716441 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(38) E:cisco.1.507 10.0.2.42 linkUp 821034 .iso.org.dod.internet.mgmt=[|snmp]
16:18:49.967120 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(36) E:cisco.9.41.2 10.0.2.42 enterpriseSpecific s=1 822790 .iso.org=[|snmp]
16:18:50.217115 IP 10.0.2.42.58071 > 10.0.2.2.snmptrap: C=geswlur Trap(38) E:cisco.1.507 10.0.2.42 linkUp 822790 .iso.org.dod.internet.mgmt=[|snmp]
but the "trap receiver" tool does'nt display them.
It works if I set the APs to send the traps with the community public.
My snmpd.conf file is as follows:
com2sec notConfigUser default public
group notConfigGroup v1 notConfigUser
group notConfigGroup v2c notConfigUser
view allview included .1.3.6
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1
access notConfigGroup "" any noauth exact allview none none
syslocation Casa (edit /etc/snmp/snmpd.conf)
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat
Are there any shown issues when using communities other than public?
Thanks in advance and best regards,
Borja Borrego