I install netflow6 to monitor branch office traffic...... branch office several using frame relay and others using MPLS....
I enabled netflow both on serial and fastethernet port... at NFA 6 webclient fast ethernet port give in and out information but the serial only give in information...no out traffic recorded
how is it can happenned??
we can aside traffic issue since netflow server can receive in and out traffic record from fast ethernet (NFA 6 web client give perfect result for fast ethernet in/out traffic)
here is the show run
interface Serial0 no ip address encapsulation frame-relay ip route-cache flow no ip mroute-cache logging event subif-link-status no arp frame-relay frame-relay traffic-shaping frame-relay lmi-type ansi ! interface Serial0.1 point-to-point bandwidth 64 backup interface Dialer10 ip address 10.9.1.2 255.255.255.0 no ip mroute-cache no cdp enable frame-relay interface-dlci 110 class voice-cir frame-relay ip rtp header-compression ! interface FastEthernet0 ip address 10.9.2.1 255.255.255.0 ip nat inside ip route-cache flow speed auto no cdp enable ! ip flow-cache timeout active 5 ip flow-export version 5 ip flow-export destination 11.1.1.5 9996 !