New Template for Eaton Ex1000 UPS - Oids all get .0 appended when creating monitors

Eaton/Powerware ex1000 UPS MIB imports correctly and I can query values from device using MIB browser but when OIDs are added to a custom template, for example .1.3.6.1.2.1.33.1.2.4 which is "upsEstimatedChargeRemaining", .0 gets appended to the OID in the monitor by opmanager. I can see from the forums that this is not an isolated thing. Advice seems to be to edit opmanager_graphInfo.xml in \Program Files (x86)\ManageEngine\OpManager\conf\ and change type parameter to "interface" for each affected OID but I can't locate my custom template's OIDs with or without .0 in that file.
Below are the values returned for the device OIDs using the MIB browser. I have attached the MIB. Is it possible to create a template or correct the MIB so this will work for us and give us, at the least, the graphs/gauges for battery charge, input/output voltages and notify us when it is running on battery?

upsIdentManufacturer.0:-->EATON
upsIdentModel.0:-->EX 1000
upsIdentUPSSoftwareVersion.0:-->INV: 02
upsIdentAgentSoftwareVersion.0:-->Network Management Card V6.00 HA
upsIdentName.0:-->ID: 1Y1L12009 , Msg: unknown
upsIdentAttachedDevices.0:-->
upsBatteryStatus.0:-->batteryNormal(2)
upsSecondsOnBattery.0:-->0
upsEstimatedMinutesRemaining.0:-->87
upsEstimatedChargeRemaining.0:-->100
upsBatteryVoltage.0:-->410
upsBatteryCurrent.0:-->0
upsBatteryTemperature.0:-->0
upsInputLineBads.0:-->3
upsInputNumLines.0:-->1
upsInputFrequency.1:-->500
upsInputVoltage.1:-->228
upsInputCurrent.1:-->0
upsInputTruePower.1:-->0
upsOutputSource.0:-->normal(3)
upsOutputFrequency.0:-->500
upsOutputNumLines.0:-->1
upsOutputVoltage.1:-->229
upsOutputCurrent.1:-->7
upsOutputPower.1:-->98
upsOutputPercentLoad.1:-->17
upsBypassFrequency.0:-->0
upsBypassNumLines.0:-->1
upsBypassVoltage.1:-->228
upsBypassCurrent.1:-->0
upsBypassPower.1:-->0
upsAlarmsPresent.0:-->0
upsTestResultsSummary.0:-->donePass(1)
upsTestResultsDetail.0:-->
upsTestStartTime.0:-->309 days, 20 hours, 37 minutes, 32 seconds.
upsTestElapsedTime.0:-->0
upsShutdownType.0:-->system(2)
upsShutdownAfterDelay.0:-->-1
upsStartupAfterDelay.0:-->-1
upsRebootWithDuration.0:-->-1
upsAutoRestart.0:-->on(1)
upsConfigInputVoltage.0:-->230
upsConfigInputFreq.0:-->500
upsConfigOutputVoltage.0:-->230
upsConfigOutputFreq.0:-->500
upsConfigOutputVA.0:-->1000
upsConfigOutputPower.0:-->900
upsConfigLowBattTime.0:-->30
upsConfigAudibleStatus.0:-->enabled(2)
upsConfigLowVoltageTransferPoint.0:-->0
upsConfigHighVoltageTransferPoint.0:-->0

http://www.postcarbon.org