Netapp interface traffic wrong

Hi,

I have started a fresh installation of OP-manager with 8811.

Adding NETAPP FAS 3020, and Cisco switch 4507, i have noticed that there is a big difference between the traffic reported on the port of the cisco switch versus the traffic reported on the netapp.

Attached the comparison: I have added the port-channel and the port members traffic from the switch on the first page and the VIF and port members from netapp on the second page. On the third page I have added the print screens of the interface discovery of PO / VIF and one single member switch / netapp. The rest of the members are the same. As i cannot upload the DOC i have made 2 print screen to it and upload below.

All ports are 1 GB and they are seen by OP-Manager as 1 GB. The port-channel is 3 GB both on the switch and on the netapp in reality and the same seen by OP-manager.

On the switch i see expected traffic but on the netapp ports i see all limited to 100 MB.

Can you please let me know what is needed to have the proper graphs on the netapp interfaces as well?