Matching traffic flows on two between two routers

Matching traffic flows on two between two routers

Folks,
I have two routers connected via T3. I've set up monitoring of the T3 interfaces on both routers. Since I am using some custom applications, I've created some custom labels for these apps. In theory, the application lists on both routers/interfaces should match. But the don't in my case.
When I look at the downstream router, I see all the apps I am using, but when I look at the upstream router (other end of the T3) I see only some of the flows listed on the downstream router.
Below is a list of apps I see on the Downstream router...

AREQ-PRI 4.49 GB 43%
SIAC-B-5 754.46 MB 7%
SIAC-B-3 467.14 MB 4%
SIAC-B-1 452.23 MB 4%
SIAC-B-2 432.76 MB 4%
SIAC-B-4 343.72 MB 3%
ARCA5 213.61 MB 2%
ARCA4 196.34 MB 2%
ARCA3 137.73 MB 1%
ARCA2 136.19 MB 1%
NYSE-1-BKP 100.29 MB 1%
NYSE-4-BKP 100.05 MB 1%
NYSE-3-BKP 95.47 MB 1%
NYSE-2-BKP 89.1 MB 1%
SIAC-B-6 60.36 MB 1%
ARCA11 53.85 MB 1%
ARCA8 51.15 MB <1%
ARCA6 49.44 MB <1%
ARCA16 49.26 MB <1%
SIAC-B-7 46.65 MB <1%
ARCA15 27.81 MB <1%
SIAC-B-8 22.39 MB <1%
ARCA14 21.5 MB <1%
SIAC-B-9 17.51 MB <1%
ARCA10 16.41 MB <1%
Netflow 526.55 KB <1%
pim-rp-disc 82.24 KB <1%
telnet 26.55 KB <1%
icmp 24.04 KB <1%
snmp 19.78 KB <1%
ntp 3.57 KB <1%
snmptrap 169.00 Bytes <1%

The second list below is a list of what I see on the Upstream router...

AREQ-PRI 778.95 MB 21%
ARCA5 282.26 MB 8%
ARCA4 269.28 MB 7%
ARCA3 197.25 MB 5%
ARCA2 195.1 MB 5%
ARCA16 79.39 MB 2%
ARCA6 73.23 MB 2%
ARCA8 73.18 MB 2%
ARCA15 50.64 MB 1%
ARCA11 48.32 MB 1%
ARCA14 32.39 MB 1%
ARCA10 19.75 MB 1%
pim-rp-disc 180.55 KB <1%
icmp 23.96 KB <1%
telnet 21.75 KB <1%
snmp 20.56 KB <1%
ntp 1.29 KB

What am i missing? Any suggestions would be appreciated.
Thanks, P.Z.


























































                New to ADSelfService Plus?