Juniper Srx210be Netflow Configuration
Hi I have a Juniper Srx210be. I am Trying to configure Netflow on it but the graphs that it shows me are not correct. I have a 20Mbs Mpls and in the graphs shows 100 Mbs or even More. This is the configuration apply to the device ( Does The Forwarding-Options Family interfere?) I already change the rate to 1000, the run-length to 9 and the sampling frecuency on the netflow but still not luck. Thank you for your help!!!
forwarding-options {
sampling {
input {
rate 1;
max-packets-per-second 7000;
}
family inet {
output {
flow-server 10.66.150.105 {
port 9996;
no-local-dump;
version9 {
template {
netflow_uribe;
}
}
}
inline-jflow {
source-address 10.1.2.2;
}
}
}
}
}
}
forwarding-options {
family {
inet6 {
mode packet-based;
}
mpls {
mode packet-based;
}
}
}
flow {
tcp-session {
no-syn-check;
no-sequence-check;
}
}
services {
flow-monitoring {
version9 {
template IPV4-JFLOW-URIBE {
ipv4-template;
}
template ipv4-test {
flow-active-timeout 60;
flow-inactive-timeout 15;
option-refresh-rate {
packets 100;
seconds 60;
}
ipv4-template;
}
template netflow_uribe {
ipv4-template;
}
}
}
}