How to control GET-NEXT IF-MIB traffic
Hello,
Using Ethereal I have noticed that all the time I have this kind of traffic:
86629 08:49:21.393902 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifInOctets
286630 08:49:21.394042 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifInOctets IF-MIB::ifSpeed
286631 08:49:21.394400 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifOutErrors
286632 08:49:21.394413 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifInErrors
286633 08:49:21.394432 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifInDiscards
286634 08:49:21.394652 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifOutErrors
286635 08:49:21.394761 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifInErrors
286636 08:49:21.394864 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifInDiscards
286637 08:49:21.399229 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifOutDiscards
286638 08:49:21.399242 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifOutOctets
286639 08:49:21.399429 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifOutDiscards
286640 08:49:21.399542 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifOutOctets
286641 08:49:21.404648 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifOutOctets IF-MIB::ifSpeed
286642 08:49:21.404667 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifInOctets
286643 08:49:21.404673 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifInOctets IF-MIB::ifSpeed
286644 08:49:21.405518 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifOutOctets IF-MIB::ifSpeed
Is there any way to control this? It just make too much load on my network. Thank you in advance. By the way, very good program and very fast support! ;-)
Best Regards,
Ivo
Using Ethereal I have noticed that all the time I have this kind of traffic:
86629 08:49:21.393902 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifInOctets
286630 08:49:21.394042 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifInOctets IF-MIB::ifSpeed
286631 08:49:21.394400 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifOutErrors
286632 08:49:21.394413 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifInErrors
286633 08:49:21.394432 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifInDiscards
286634 08:49:21.394652 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifOutErrors
286635 08:49:21.394761 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifInErrors
286636 08:49:21.394864 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifInDiscards
286637 08:49:21.399229 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifOutDiscards
286638 08:49:21.399242 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifOutOctets
286639 08:49:21.399429 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifOutDiscards
286640 08:49:21.399542 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifOutOctets
286641 08:49:21.404648 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifOutOctets IF-MIB::ifSpeed
286642 08:49:21.404667 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifInOctets
286643 08:49:21.404673 10.243.176.65 10.243.104.145 SNMP RESPONSE IF-MIB::ifInOctets IF-MIB::ifSpeed
286644 08:49:21.405518 10.243.104.145 10.243.176.65 SNMP GET-NEXT IF-MIB::ifOutOctets IF-MIB::ifSpeed
Is there any way to control this? It just make too much load on my network. Thank you in advance. By the way, very good program and very fast support! ;-)
Best Regards,
Ivo