Failed to netflow configuration version 9 on Cat 3850 device.

We had configure netflow as below:

flow record record1
match ipv4 version
match ipv4 tos
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
match interface input
collect interface output
collect counter bytes long
match application name
collect counter packets long

flow exporter export1
 destination 172.31.29.250
 export-protocol netflow-v9
 transport udp 2055
 template data timeout 60
 option application-table timeout 60

flow monitor monitor1
record record1
exporter export1
source 
cache timeout active 60
cache timeout inactive 15

INT-L3-WAN354K(config-if)#ip flow monitor monitor1 output 
% Flow Monitor: Flow Monitor 'monitor1' 
Unsupported match field "interface input" for ipv4 traffic in output direction
Match application name is not supported on wired interfaces.
Unsupported collect field "interface output" for ipv4 traffic in output direction

Thank you in advance.