Problem with backup cisco device in DeviceExpert
Hello! We have problem with backup configuration from a few cisco devices. Configuration of device is correct. But some of them are not backup. From debug log: [09:26:57:393]|[02-14-2017]|[com.adventnet.ncm.messageboard.MessageBoardAlertUtil]|[SEVERE]|[14]: Exception in connenctAndFillMessageDetailsTable()| java.text.ParseException: Unparseable date: "30-Dec-2014 02:15:26" at java.text.DateFormat.parse(Unknown Source) at com.adventnet.ncm.messageboard.MessageBoardAlertUtil.getTimeStampValue(MessageBoardAlertUtil.java:113)
Event log monitoring will only alert on Critical
I created an event log monitor but it will only email when I set the criteria to Critical.
Default threshold for Application Monitors
I need to change the threshold for the application monitors from Critical to Attention. When I set the threshold through the administration tool it applies it to Critical.
Critical Alerts for Router/ISP Down or Unreachable
I'm looking for the best way to configure monitoring alerts ONLY for when the router/switch/ISP/Power is down/unreachable. I'm in the process of setting up thresholds, templates, and alerts but had to disable temporarily as were getting many email alerts. Ill eventually re-enable alerts for CPU, Mem, buffer, tempatyre, packet loss etc.... We have over 30+ branch offices and our primary way we would like to monitor is by getting a CRITICAL ALERT/email notification if the router uplink is unreachable.
Help with query
Can someone please help convert this query from Firebird to Postgres? I have a Cisco 3750G switch-stack which is not showing all ports in SPM, and this query fixed it (prior to migrating to Postgres). update "SPMInputConfig" set "SNMP_SCAN_TYPE"=3 where SWITCHNAME='s-agd-n200j-1'
Can I monitor Server Events Errors using OpsManager
Hi All, We would like to Add a monitor for Error Events of Windows Server from Ops Manager, Please Suggest. Thanks
Add process monitor to several servers
Trying to find a way of monitoring a process on several servers - the quick config doesn't include processes. V11 Thanks Andy
DATABASE PROBLEM!
Hello I did a clean install to opmanager and first added vmware and I let it discover its vm-s. It only discovers certain vm-s based on i don't know what and i cant add other vm-s to monitoring that don't have snmp because it requires credentials. So my question is how did vcenter added several vm-s to monitoring and others not(without snmp)? So I got my vcenter monitoring with several vm-s. And it stops at 26 ( i have 40sthing vm-s really). I see that my dashboard ipam, virtualization and server
Can I monitor Netapp?
Hello everyone Where I work there is a netapp storage system. I want to know if it is possible to monitor. If you can monitor it, you can tell me how. I would appreciate it if you help me. Thank you
Unable to connect probe url
hello ~ sorry about my bad english i am trying to add my dc to the opmanager 12.2. when the progess success finish and try to view it i got an error "unable to connect probe url" can you help to solve this problem
Availability Report
Hi. Running version 11600 Is it possible to get a availability report graph for the last year or is last month the limit? Regards Torsten
OpManager's values of Additional Fields in Workflow (Windows\Linux scripts)
Hi, How can I use values of Additional Fields in Workflow -> External Actions -> Execute Windows Script (Windows\Linux) Variable like ${CustomField(Switch Port)} didn't work.
200 interfaces issue
Hi everybody, I am trying to clear our monitoring system. When I try to unmanage uneeded interfaces I am getting error: "Please select less than 200 Interfaces". Is it possible to change the limit in the settings/registry or I need to go straigh to the DB? Thank you, Pavel
IFIndex to Real Names Cisco ASA
Hi, I would like to the ASA to display the correct name of the interface rather than the ifidex names.ASA version is 9.3 and the OPmanager is version12.
NetFlow error notification: No interface found.Device Adding Failed
The device has passed the SNMP credentials. The device was also in NetFlow before but was removed. Trying to re-add the device but getting the notification, "No interface found.Device Adding Failed". I only have 2 Netflow interfaces allowed to be monitored. Im not monitoring any at the momenet. So my question is, how do I add and remvoe interfaces to Netflow. Im using OpManager V.12 with Netflow/Flow analysis already added on.
Trying to understand how licensing works.
OK, Here's what we currently have. You'll see this info under the "About" option under the Admin /home selection in OPManager. Maximum no of Devices: 200 Total Monitored Devices: 89 Total Monitored Interfaces: 1037 NetFlow: 2 Interfaces NCM: 2 Devices SwitchPortMapper: 50 Ports: IPAddressManager: 50 IPs Issue / Question: When attempting to login into Opmanager, we receive a notification page stating we've went over our interface monitoring count of 50 by X amount (51+) of numbers. The option is to
Where can i find APP-Plug-ins Tab in OPManager v12
Dears After i install app plug-ins where can i find the app dashboard ? is there any tab like v11 ? Thanks
OPManager and GMSA
GMSA is a service account which initially has a blank password but as you use it for a account it gets a complex password from Key Distribution Service (KDS) and keeps on renewing it momentarily which makes it highly secure. Lot of application like task scheduler or Opmanager do not allow to enter blank password to start with. To counter this for task scheduler we use Powershell like below :- To use the PowerShell, you need to define an Action (what), a Trigger(when) and a Principal(under which identity):
ManageEngine Opmanager Service account user requirement
We were told that ManageEngine Op manager service account needs Domain Admin or Local Admin wrights, this is a problem as we don't wish to grant Domain Admin wrights. Any workaround for that, or any other group like "Server Operators" membership can work. Also would like to know if Opmanager supports GMSA or MSA. Please email zabbyzoheb@gmail.com Thanks, Zoheb
How to monitor Fortigate VPN Tunnels with OPManager
I would like to know if it's posible to monitor a Fortigate 300C VPN bandwidth, users's number connected to the VPN and another information. Thanks!
Hung at initializing modules: Manage Engine OP Manager 12
After installing the OP manager, it's hung on the screen where it says initializing modules.It's been 40 minutes now. Local host can't be reached.
Custom SLA Requirements
I am needing to run reports for Device/URL Availability, but I need to be able to do something like M-F 7a-7p & Sat 7a-2p for reporting. I had heard before about using downtime schedules, but I still need to be alerted during the downtime schedule if issues. Any ideas? Custom queries? API? Thank you!
OpManager has detected that it has lost network connectivity and has suspended all monitoring. Monitoring will be automatically resumed once connectivity is established.
I have just discovered Opmanager has decided "OpManager has detected that it has lost network connectivity and has suspended all monitoring. Monitoring will be automatically resumed once connectivity is established." last Friday. I have checked and its network remained perfectly fine (Its connected to an internal network on one nic and the internet via another port) and its Event Log shows no issues with network connectivity. How do I control how this is triggered and what device is it monitoring
Hyper-V Orphaned VM's after Dynamic Optimisation
Good afternoon I have successfully discovered our 4 node cluster and all VM's attached to these however i have come across an issue where the VM's will become orphaned if they move Host. We use Dynamic Optimization and the VM's will automatically move Hosts if the current host becomes overloaded. I am unable to find a way to manually or automatically update the hosts/VM's to show the new host, instead they become orphaned. I found a post stating that you had a patch for version 11200 but
Email Notification does not contain SQL Instance
When I get an email notification for a SQL Alarm it does not tell which SQL instance. I have one server that has four instances and the alarms are set differently on each instance.
Fail to delete default widgets is "Enterprise Dashboard" in OPM12
We fail to delete the widgets in "Enterprise Dashboard" in OPM12, and also delete the custom dashboard.
Contest: Predict what might complicate your IT this year.
New year brings new set of challenges. Take some time to think on what can complicate your IT this 2017, and prepare yourself to combat them. What are the top IT challenges you think can come your way, pick the top five and get a free t-shirt*. Contest open till February 3, 2017. *T-shirts will be given to first 100 registrations.
OpManager Application Manager plugin asking to reauthenticate
I've installed a trial version of OpManager v11.5 along with AppManager plugin. the problem is that when I try to browse to OpManager parts related to AppManager plugin, it asks me for username and password. I login with the below credentials: user: admin pass: admin@opm Is there any way to bypass the authentication for this plugin?
Enable Mobile Push Notification (Alerts)
Hi, I want to enable the push notification on my mobile in order to act when the device is down. I tried this post; https://forums.manageengine.com/topic/ios-push-notifications but I can't find the page on my OpManager. I am using Build 12200. Kindly help.. Thanks, Jassim
OpManager to ServiceDesk Integration/Connection errors
Hi I'm evaluating OpManager and ServiceDesk Plus MSP and trying to establish a integration. What I got for now: 1. OPM and SDP MSP are on the same Windows 2012 R2 server 2. All settings are default with default users and passwords. 3. I configured OPM with Email settings and it send emails. 4. I configure SDP MSP with SAME email settings as OPM and it receive messages, putting it into SDP requests 5. I configured SDPMSPConfig.xml with "My Org Inc"/Common Site/administrator 6. I configured OPM integration
Switches are not showing traffic
Installed OpManager trial and added 4 of our HP ProCurve switches via the Add Device option in the Inventory section. Switches added fine; ie OpManager was able to query the switches and get info about them. I can view the ports and all, but no traffic. If I click into each switch in OpManager, I can see that Flow Monitoring seems to be off (red circle with an 'x'), and assume this is the issue, but I cannot find where to enable this. sFlow is enabled on the switches and other software can see/read
MIb Browser Setup
HI, I already installed the opmanager mib browser to the primary server. After installing, i just run the ./StartOpManagerServer.sh. Now I am trying to connect fro a stand by server but i have no idea for the username and password that I need to use. Can someone help me what I need to do next?
OpMan V12.200 Switch/Device Interface Bulk Removal
If someone is looking for a way to bulk remove interfaces from switches for ports they do not want to monitor you can go to the main page of the selected device - scroll down to interfaces - click the expand icon - then at the top left click the Status (this puts a check next to every interface on the page) - then uncheck the ports you do not want to delete - then at the bottom left is a very dim trashcan icon - click it and they are deleted. Thank you, Tony
OpUtils or OpManager cannot start after fresh install
After the fresh install of Manage Engine Oputils 12, reboot and cannot get the service to start automatically. Getting error "The ManageEngine OpManager service on the local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs." Ideas?
Change log in Opmanager
Hello Is there a way to see a user history of what changes were made in OpManager. We have had a few instances of a technician making a major change within OpManager and breaking one thing or another. But we dont know who made the change or when. Like in AdManager its keeps a complete log of all technicians actions within the application.
Custom Columns for OpManager Reports
Hi, Can someone please advise how to create a custom columns on the OpManager Reports section. Thanks, Ramesh
Feature requests for RackBuilder of beta.
Hi all, We have tested the feature about beta of Rack Builder. We seem to be nice if you add below features for Rack Builder: 1. Ability to blinking the icon when alarm is generated. 2. Ability to edit the "Front/Rear" name. 3. Ability to edit the font size/color. 4. Ability to add several fronts on one canvas. 5. Ability to move(or drag & drop) the location of Front image. 6. Ability to change the background color/image. 7. Ability to add to widget of dashboard. 8. Ability to remove the margin between
Domain change of OpManager server
I am going to change domain name of OpManager server. Is there any impact of it into existing configuration?
Dashboard for management
Hi everyone, Does anybody know how can I create a high-level dashboard for management in OpManager? I need to group different servers/network devices in groups and hide them under the tiles. The tiles are going to look like: Email, Network, VM, SomeApp. The tiles should change the color according to the devices status inside. Kind regards, Pavel
Missing translation: webclient
Today I installed the patch 12.2 going from build 1200 (ManageEngine_OpManager_12_0_SP-2_0_0.ppm). Upon restart of Opmanager I get "Missing translation: webclient" spread throughout the different pages. On the top of the main dashboard screen I have for example "Missing translation: webclient.probe.successfully.installed!" Because these are kind of too intrusive on the screen, it has made Opmanager unusable My install: OS Name & Version Linux, 4.1.12-61.1.25.el7uek.x86_64 OpManager version 12200
Next Page